fwiw, that's not actually a static IP configuration, which is driven by the client.
That's DHCP IP Address Reservation, driven by the router...
Cheers!
That's DHCP IP Address Reservation, driven by the router...
Cheers!
Good point.That's awesome - I really like the execution.
However, you might have a big problem with that AC bulkhead...
Cheers!
there is a well explained guide at page #14 on how to flash the bins for the ESP8266, dont know about OTA updatesI am still on 2.4, to be honest, dunno how to do OTA update and afraid to update while still works.
the setting "maxCoolTimeForEst" means what is the maximum cool time? I have set it to 1500 so it should be 25 min but my fridge is still cooling more than 5min. Maybe this does only effect in beer constant mode?
Yeah updating seems to be easy and there is not much setting to be set after fresh install. I only have sometimes problems that on the webpage I see that controller is not uploading data and "failled to connect to server", dunno why.
I will suggest to clear the flash. SPIFFS is not designed to be used like what general file systems do. After a period of write/re-write, the file system will become fragmented, and unpredictable problem might happen. The issue is addressed in latest v3.0 by limiting the writing to SPIFFS.
Just use this URL to format SPIFFS.
http://brewpiless.local:8008/format-spiffs
Any chance of porting this to the ESP32?
this is a fridge Const mode (so no PIDs involved) and my freezer is from 80' There is nothing really fancy inside so I do not think there is a defrost thing. Even if it would it is not a fridge problem but a controller, so the controller is not starting the fridge but it is waiting as there would be some delay factor (like deadtime or minCoolIdleTime) but there is nothing that I know of.
Can this support multiple ispindels?
No. What is the point for multiple iSpindels?
he has 2 FTSSs, 1 in each?but what is the point of having 2 ispindels? You will calculate a gravity mean out of 2 to have more precise values or what?
I'm not controlling the fridge with brewpiless - its sole purpose would be to log data from 2 (or more) ispindels. Like i said, I have a bunch of d1's laying around.. the logging + AP on brewpiless seems like it'd be perfectbut what is the point if you can control only one fridge based on one reading with one brewpiless control module? For another you can just check the values directly on ispindel
you could use that same logic for many things - i was just asking about ONE of MANY use cases. Forget about itbut then you do not need brewpiless to log the data from ispindels
You don't need to get why I want to do it, I was just asking if it was possible. EndI do not get you, iSpindel is standalone, there is no need of anything else if you just want to monitor your beer. Integration to brewpiless is only for controlling a fridge based on the gravity readings so why you want to complicate things and use brewpiless to monitor/log ispindel only? It is like ordering with shipping from the shop on next to you.
Enter your email address to join: