keg

Hello everyone, Can anyone tell me how long it takes for F-2 or CBC-1 to finish fermenting? I've put about 1-2 grams in a 5 gallon keg together with 60 grams of sugar in order to scavenge oxygen en naturally carbonate. I spunded but I saw very little pressure change (about 2psi in 24h)...

Good day home brewers. I am currently not a home brewer but just received my first kegerator! It has two taps but the beer I drink only comes in the short fat sizes and not tall skinny so I can only fit one keg at a time. Can I run one keg to both taps? If so how? And is there any negative...

Please forgive my ignorance, assuming this has been answered before... Don't have the requisite bottles on hand for a brew for a ferment that is a week in. Planning on getting into kegging soon. Don't exactly have the cash for a full system (tank, regulator, tap and keg) this month. Would it...

This is an old freebee 2.5 gallon pin lock that needs some work + I would like to convert to ball lock. The problem: the gas post is 11/16" -18 and the liquid post is 3/4" - 18. Can't find any place that offers ball lock posts to do the job. Any ideas? Maybe I should just use it as a StarSan...

Hi all. I recently put together a keg setup and thus revived my beer brewing motivation for the first time in 3.5 years - great! I'm almost through the first keg and I'm looking to brew a quick turn around beer. I like roasty beers so the dry stout seemed like an obvious choice (roast to mask...

have three of the small torpedo kegs i am going to part with, excellent condition, maybe a year old, tops. i believe these are the slimline edition so bit narrower and taller vs wide and short. asking $65each. located in SF, mission district. SHIPPING- i would MUCH prefer to sell these...

I’m new to kegging and only have YouTube vids and threads here on HBT to go off of. I have a couple of quick questions: Why is there a metal piece on the threading of my pressure adjustment knob on my regulator? (See pics below) Is it to keep the knob from moving once I set it? Also, I’ve heard...

Hello everyone, I'm trying to make my process as simple as possible, like probably most of you. As purging keg's seems like a big waste of CO2 and water purging is extra work. I've been wondering what if I ferment my beer and just transfer it to an unpurged keg with either a few points left...

Hi! I am going to brew my first NEIPA soon and I have just bought me a keg. General, I have had a lot of oxidation problems when bottling my IPAs so I am hoping the keg will help me in this situation. One question I have is if you guys have seen some problem with oxidation with different dry...

Hey everyone, I was wondering if anyone knows a good place where I could buy good quality keg rubbers. I'm tired paying overprices prices from homebrew shops and want to buy a bulk from China as i'm living in SEA. If anyone has any experiences with suppliers please let me know. Thanks!

Hey Everyone, I just built my keezer. I put my first batch in a keg today and set everything up. I followed a video on YouTube about purging the keg and i now have the c02 level at 12 psi and I'm doing the set it and forget it carbonation. I hear a hissing of c02. Is that normal since its slowly...

So I switched to all grain brewing and I made a 15gal mash tun out of a wheeled square cooler because I want to have the potential to make 10gal batches. The other day I tasted a milk stout and loved it! So now I wanna make a 2.5gal keg of it. So that would be a ~4gal boil. Can I use my mash...

I recently found out I will likely be unable to drink much beer anymore due to a minor medical condition (huge bummer, but nothing serious), so I am looking to sell a significant stash of brewing supplies including a near-clone of Kal's 30 Amp 20 gallon electric brewery...

I went through C02 crazy fast on this keg. I noticed when I tapped it its loose and spins pretty easily. Then I noticed its leaky and the more I messed with it the more it leaked, UNLESS I put downward pressure on it which slowed or stopped the leak. Also I think the stem(s) is spinning when...

I was asked by a friend , who recently got a keg of nitro stout. If he could just run his CO2 on it instead of nitro. And he asked what would happen. I actually dont know I said any input

I've been having some woes with a leak somewhere in my keg system. I replaced the distributor with a new Taprite system (which is wonderful) and with it new lines for both gas and liquid sides. However, what was left in my C02 tank still seemed to drain very quickly. I'm taking the...

I picked up a small keg for an upcoming family function (cause I ain't willing to share my good stuff ;) ) and I'm wondering if I can tap the keg use it, untap to transport and then retap? Just wondering because I'm pretty sure we won't drink the entire keg but I also don't want it to go to...

Hi I just bought a kegerator conversion kit that came with 2 corny kegs. I'm just wondering if people think 2 kegs plus the co2 will fit in a 4.4 cu model mini fridge. This is the particular one I'm looking at. Thanks so much for the help...

After 5 years of brewing and bottling, I'm about to start kegging. (I know, the guys in my club think I waited too long, too.) I went to the sticky post for kegging and found 10 of the first 14 links were dead. perhaps it is time to build a new sticky post for the forum. If you all will...

Hey guys! I have an Irish Red that has been cold crashing for over 48 hours. This is my first attempt at cold crashing and I'm curious if you guys add gelatin to your fermenters or to your keg after racking? Also, I couldn't help wondering if making the gelatin solution and adding it to the keg...