Timothy Schwitz
Member
- Joined
- Apr 14, 2019
- Messages
- 14
- Reaction score
- 0
Thanks in advance for reading, and any possible input.
Trying to build my control panel, and am almost finished but running into problems.
I used the first picture as my guide but swapped out pids (will update with correct models shortly)
The problem I'm having is that when I turn the main power on the HLT and BK pids both show firing or active lights when the switch is in the off position.
I'm not sure if this is switch, pid, or ssr problem and am banging my head against the wall.
Warning attachment overload. I can take more specific pictures in morning if needed.
Thanks again
Trying to build my control panel, and am almost finished but running into problems.
I used the first picture as my guide but swapped out pids (will update with correct models shortly)
The problem I'm having is that when I turn the main power on the HLT and BK pids both show firing or active lights when the switch is in the off position.
I'm not sure if this is switch, pid, or ssr problem and am banging my head against the wall.
Warning attachment overload. I can take more specific pictures in morning if needed.
Thanks again