• We have a new forum and it needs your help! Homebrewing Deals is a forum to post whatever deals and specials you find that other homebrewers might value! Includes coupon layering, Craigslist finds, eBay finds, Amazon specials, etc.

ebiab

HomeBrewTalk.com - Beer, Wine, Mead, & Cider Brewing Discussion Community.

Help Support Homebrew Talk:

  1. Lonerockbrewing

    Inspiration for new brew cave / ebiab recomendations

    Building a new home within the next year or so, so naturally I'm considering my brew cave first and foremost. I'd love to hear or see design ideas or inspiration for my future home brewery! Additionally, I'm considering ditching my 3 vessel cooler system for an electric brew in a bag/basket...
  2. D

    Brew Rig - HP Moore Brewing Co

    50 AMP Supply to the brew rig. It was purpose built from the ground up over a 4 year period to be a No Sparge a.k.a. (BIAB) system. 3 batches made so far with each batch better than the previous. 75% efficiency without adding any additional base malts (I just follow) the recipe "as is"...
  3. D

    Brew Rig - Vince "Screwy Brewer" Feminella Brew garage

    For safety reasons I decided to hire an electrician to install a 4 wire 220 volt 30 amp GFCI breaker and run the line to a receptacle near the location of the EBC-SV brew rig controller. The EBC-SV is the heart of the eBIAB system it runs the Chugger pump and regulates the output of the heating...
  4. D

    Brew Rig - Cowbrau E-BIAB System

    220 volt electric BIAB brew rig using overnight no chill. My brew day is as short and simple as possible with an all grain batch. Using a liquid yeast starter on a stir plate from the wort it will go into the next day, along with pure O2 aeration consistently provides clean exceptionally tasty...
  5. V

    Craft The Perfect Draft - Hazy Daze Stout

    As the Fall season approaches here in the Northeastern United States it brings with it the shorter days and cooler temperatures that signal the end of summer. In a few weeks the leaves of the deciduous trees in my neighborhood will start to change color. The same green leaves that provided...
  6. W

    Questions about eBIAB systems

    Hello everyone! This will be my first post on this forum after lurking on various fora for a few weeks, reading and gathering as much information as I could before the answers to my questions became too difficult to understand without help - so here I am :ban: As the title indicates I am...
  7. T

    REX-C100 in Brew in Basket setup overshoots

    I recently moved from a cloth bag for my eBIAB setup to a stainless mash basket. In my last brew day, I noticed the kettle overshoots significantly (more than 5C). I think this might have to do with the basket causing less circulation in the kettle, but I'm not sure. Maybe it's something to do...
  8. jamorgan3777

    Brewhardware's Steam Slayer First Impressions

    First Impression: WOW I am getting back into brewing after about a year hiatus and what drew me back was the idea that I could address the vapor management issues I had been having with my new setup. Before my hiatus, I had moved operations into a nice, remodeled basement location and...
  9. A

    Clawhammer Controller Teardown Request

    I'm looking to buy a 120V Clawhammer eBIAB setup, but would like to upgrade it in the future. Most likely I'd be looking to do a custom setup with craftbeerpi after a couple years. I'm curious how recyclable the clawhammer controller's innards are: with their newer "gray box" controller, I...
  10. Tidwellc

    Sugars settling in hydrometer sample?

    Hey guys, I've got a few batches under my belt with an eBIAB setup I bought and I've been trying to take a lot more samples throughout the process to find out what my efficiency is. My last batch was a while ago so I don't quite remember exactly the numbers I was getting, but basically: I'm...
  11. blargs_boiler

    eBIAB Control Panel Build Questions

    I am getting ready to transition to all grain and have decided that eBIAB is the route that I would like to take (live in a 2nd floor apartment so I don't have anywhere I can brew outside, and love the simplicity of the one vessel system). I have found several threads to be helpful but had some...
  12. S

    Blichmann BoilCoil - which one do i have?

    I recently purchased an eBIAB setup from someone getting out of brewing. He sold me an eBIAB system which included a kettle with a Blichmann BoilCoil. When we were talking, he mentioned I could swap out the plug end (standard 120V) for a 240V end and reach boil faster. After a little bit of...
  13. joeybeer

    Building a 240v 5500w Craftbeerpi Single Heating Vessel System (EBIAB?)

    Hi all, I've been thinking about this build for what seems like 10 years ! Long enough, that my dreams of PID control have been replaced by the amazing Craftbeerpi. We moved into a new house recently, and when I removed a cover plate off the wall behind my work bench, what should I find but a...
  14. Oberlutz

    From storage room to small brewery

    After a year of brewing in a garage, where we shared the space with motorbikes, bikes, lawnmower, flowers and even garbage bags, we decided to build a dedicated brewery. We got the OK to remodel a bairbone storage room. The goal of this room was to make a small brewery fitted to our needs as a...
  15. O

    eBIAB Setup

    Hey Guys, I am making the jump from a 10g propane burner and gatorade mash tun to a 20g electric biab. I've been trying to understand how the mash works in a single vessel, would I be running the pump and element at the same time constantly during the mash and have the probe on a "T" output of...
  16. L

    Arduino Bluetooth eBIAB controller with Windows 10 App

    Hey Folks, I thought I'd share this with everyone as I think it would be useful to others out there that like to tinker. I had posted a long time ago about my eBIAB setup here: https://www.homebrewtalk.com/forum/threads/windows-wpf-and-arduino-20-gallon-ebiab-build.644565/ I have gone a few...
  17. J

    Heating element for 10 gallon SS Brewtech Kettle

    Hey everyone, Looking to turn my setup into an ebiab set up and have a ten gallon SS Brewtech Kettle. I was looking to go the 240v 30a route and use a 5500 watt element but every element I can find is too long for the kettle diameter. The diameter of the kettle is 13.8 inches and I was looking...
  18. Goowa

    Yet another eBiab control panel

    Been agonizing and analyzing for nearly a year now about my electric brewery build. I finally made the determination that a three vessel system is out of my price range, at least for the moment. So I landed on a single vessel electric biab. Got the 5500W TC element from Bobby at brewhardware...
  19. C

    New to BIAB, Burner / Heat source questions

    Just did my first BIAB batch on Monday. It was my first full volume boil and I attempted it on my kitchen stove. It quickly became apparent that the stove was not up to the task as it took over an hour to reach my mash temp and then again nearly an hour to reach boiling once the mash was...
  20. B

    Just finished my dual-element electric BIAB setup

    I just wanted to give some ideas to anyone looking to do an eBIAB setup. I just need a hose for water supply and a hose for a drain from my CFC, and I am ready to brew. I proofed the electronics tonight - everything is working. Is there a better way to waterproof the locking L6-30R connectors...
Top