kgirthofer
Member
- Joined
- Feb 1, 2018
- Messages
- 6
- Reaction score
- 9
Morning all - Just finished (mostly) building out my keezer and wanted to share my pictures!
I still have to throw in some insulation around the collar up top and actually get some beer in there - but I'm mostly just super excited to get some beer on tap at home!!
I don't have any shots before this - I picked up an insignia 7cu/ft freezer and about 30' of 1x8" pine. Hit it with 45 degree cuts and assembled right on the inner lip of the seam. I think I paid about 230 for the wood and the freezer.
Got all the boards cut and I installed corner brackets - I found that if I ran the screws on the outside edge of the countersink hole on the brackets it did an excellent job of pulling the boards tightly closed. I used ratchet straps to hold everything square while I assembled. Put the lid on for testing - looks like I get a solid seal all the way around - with exception for the back. If I put a flash light in there I can see some light escaping from the back board from the way the lid settles on it. I'll be installing a small 1x1 square board back there to get an extra inch of lip for the lid seal.
Drilled 3 tap holes 4" off center 1" dia. and got to staining. I got excited and put the sealant on the corners before I stained which was dumb - looks poor on the inside now - but i'm covering it up with insulation anyway. /shrug
I've never stained something before - I probably wasn't supposed to do it all vertically but what ever. Doesn't need to be a work of art. Here's during the staining process - I used "English Chestnut" to stain.
And after the wipe - terrible picture
I let that dry and sealed it and got to running the lines.
I glued the collar to the freezer with liquid nails and sealed it from the inside with some window sealant or something.
I ran 11' of liquid line 3/16th for each tap... so long!
Installed the taps and the lid - I think it came out really great. Perlick 650ss taps
First beers going on tap - Dark Kolsh - Dark Saison - and a NEIPA.
(Pre-carbbed IPA)
Cheers!
I still have to throw in some insulation around the collar up top and actually get some beer in there - but I'm mostly just super excited to get some beer on tap at home!!
I don't have any shots before this - I picked up an insignia 7cu/ft freezer and about 30' of 1x8" pine. Hit it with 45 degree cuts and assembled right on the inner lip of the seam. I think I paid about 230 for the wood and the freezer.
![KlnDn19.jpg](https://proxy.imagearchive.com/69e/69ebc58651fc4fa3677419f9e91836b8.jpg)
Got all the boards cut and I installed corner brackets - I found that if I ran the screws on the outside edge of the countersink hole on the brackets it did an excellent job of pulling the boards tightly closed. I used ratchet straps to hold everything square while I assembled. Put the lid on for testing - looks like I get a solid seal all the way around - with exception for the back. If I put a flash light in there I can see some light escaping from the back board from the way the lid settles on it. I'll be installing a small 1x1 square board back there to get an extra inch of lip for the lid seal.
![CCLK3qP.jpg](https://proxy.imagearchive.com/37d/37db0a945ba0672d21f0fe50b1b483d1.jpg)
Drilled 3 tap holes 4" off center 1" dia. and got to staining. I got excited and put the sealant on the corners before I stained which was dumb - looks poor on the inside now - but i'm covering it up with insulation anyway. /shrug
![WtYqkyz.jpg](https://proxy.imagearchive.com/e69/e694761ec6a2b83328464337fcd29ddc.jpg)
I've never stained something before - I probably wasn't supposed to do it all vertically but what ever. Doesn't need to be a work of art. Here's during the staining process - I used "English Chestnut" to stain.
![76A7kCD.jpg](https://proxy.imagearchive.com/d50/d5099bda6494a7afc56d67f0cb82ec07.jpg)
And after the wipe - terrible picture
![UElemY9.jpg](https://proxy.imagearchive.com/198/198db8dad6b1edd4ebe161fe75cc1452.jpg)
I let that dry and sealed it and got to running the lines.
I glued the collar to the freezer with liquid nails and sealed it from the inside with some window sealant or something.
I ran 11' of liquid line 3/16th for each tap... so long!
![S6kEi73.jpg](https://proxy.imagearchive.com/ebd/ebd037b876f3d26fe547cf129c2e7678.jpg)
Installed the taps and the lid - I think it came out really great. Perlick 650ss taps
![jAT3aJ7.jpg](https://proxy.imagearchive.com/232/232b416da2c1e381cfd08254796135b0.jpg)
First beers going on tap - Dark Kolsh - Dark Saison - and a NEIPA.
(Pre-carbbed IPA)
![v81cW5s.jpg](https://proxy.imagearchive.com/b69/b697a7e62521bb0d535b39f9c8c3ca06.jpg)
Cheers!