10 boards and shipping to Italy from JLCPCB is $10.26USD.Hello Sere I'm interested in buying a me you know the shipping prices for Italy
10 boards and shipping to Italy from JLCPCB is $10.26USD.Hello Sere I'm interested in buying a me you know the shipping prices for Italy
10 boards and shipping to Italy from JLCPCB is $10.26USD.
Hello thanks for the advice you can pass the project to order the PCB
I used the original files w/o the correction.Here you have download link for the PCB files - https://drive.google.com/open?id=17fn7bGRfCZOl3Ork7gRJEK2GKQiRCXMd
This latest revision i have not tried myself, but i only swapped the Wemos D1-mini model to a new one, since the old one did not work with printing on the PCB. This new one should.
The pictures showing the board in the sub folder not updated with latest model but it doesn't matter. Also BOM is still the same.
bigdaddyale ordered boards with these latest revision i think, so he will probably be the first trying them.
Surface mounted. It's the only part that is surface mounted on the whole board. For cooling purpose, and I think most people can solder such a chip even if you are not used to smd soldering.
I tried make the board as much through hole as possible, so everybody can solder this themselves. If I did it only for myself, smd would have been good.
And for those not used to smd soldering, just tin the large pad first, then put the regulator there with tweezers, while still keeping the pad hot.
My boards turned out nice and the d1 mini sits nicely. If RollE2k is ok with it I might be interested in building people boards if they want a fully populated one.
Is this the correct part for the voltage regulator?
https://www.digikey.com/product-detail/en/stmicroelectronics/L7805CDT-TR/497-7255-1-ND/1884014
"BSMX" is proprietary format of BeerSmith. BeerSmith does support BeerXML, and you have to choose the option when exporting.
Why would you not run 5v? to protect the esp8266 running BrewPiLess?That is no problem for me, I have no commercial interest in this project.
That regulator should work fine, yes. But if people are running 5v input, regulator is not needed.
Why would you not run 5v? to protect the esp8266 running BrewPiLess?
Chinese new year is delaying some of my components. Very annoying.
The bill of materials (BOM) is in the zip file labelled BrewController_v11-BOM.htmlRollE2k have you got a complete list of parts needed for your pcb please. Have ordered pcb and just need to get parts sorted.
Good Morning.
I have a question and would like everyone's help.
I am trying to build my system in the HERMS method and would like to use more than one pump.
In the HERMS method you use a pump to recirculate water in the HLT pan, one in the MLT that is also used for BK and another pump in the chiller.
Could someone help me by telling me where I can modify the program to use more than one pump?
Thank you very much in advance
Samuel
Hi guys a little help I can't find these pieces
IC1 PCF8574 PCF8574P DIL16
I2C-Bus
8-bit remote
I / O expander
PCF8574PN 204020 11N8515
IC3 PCF8574P PCF8574P DIL16
I2C-bus
Enter your email address to join: