• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Vitamin C - The Game Changer?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I bought my first lot from a pharmacy. Cost 17 dollars for 125g.
Just bought second lot from catering supplies shop. 300g for 12 dollars so roughly ten and 7 US dollars.
I must check the pH effect on sparge water as I'm adding lactic acid as well.
I'm using 5g in the mash, 2g in sparge and 5g in the keg.
 
I use a copper CF ZChiller for my full batches. I"ve been AA quite randomly (based on me remembering to add some to the mash). I haven't noted any negative effects using AA or a copper CF chiller.
 
I can't believe that Ascorbic acid which is a weak acid would effect the post boil pH at all. It's denatured by high temps and isn't a post boil beer pH going to be around 5 anyway?

Get a copper coin, put it in a glass with the appropriate dilution of ascorbic acid.
Do the same in another glass with post boil wort, I bet theyll both shine up nicely in time. Probably not as quick as coke but I'm not sure cokes pH.
 
I might try adding 22 gm vitamin C to 22 litres of beer just before bottling. It won't do any harm I am sure, I have been brewing the same style of beer for many years and so I will be able to detect any significant improvement. Watch this space.
 
22g? 1g/L? I suspect that has a noticeable effect on pH therefore flavour. Or did you mean 2g in 22L, @bobtheUKbrewer2? Have you tried 1g AA/L water? Personally, I'm not looking to change my beers that much 🫣 I think we need to consider why it's being used. Chances are if a beer needed 1g/L to avoid detrimental levels of oxidation there's serious issues with either the ingredients used or cold side procedures.
 
I might try adding 22 gm vitamin C to 22 litres of beer just before bottling. It won't do any harm I am sure, I have been brewing the same style of beer for many years and so I will be able to detect any significant improvement. Watch this space.
At 1 g/l you will definitely taste it. That's too much.
 
thanks Mcmullan and Miraculix ( M & M )
When I have a cold I add 5 gm vit C to 450 ml water - I can certainly taste that. But 1 gm per litre is 11 times less and masked by malt and hop flavours. And I use 150 gm hops per 22 litres. So I will risk it. Defo report back.
 
thanks Mcmullan and Miraculix ( M & M )
When I have a cold I add 5 gm vit C to 450 ml water - I can certainly taste that. But 1 gm per litre is 11 times less and masked by malt and hop flavours. And I use 150 gm hops per 22 litres. So I will risk it. Defo report back.

Feel free to try and report back. The dosage values I have seen recommended are around 3g to 5g per 5 gallon batch, so about 0.16g to 0.26g per L.
 
thanks Mcmullan and Miraculix ( M & M )
When I have a cold I add 5 gm vit C to 450 ml water - I can certainly taste that. But 1 gm per litre is 11 times less and masked by malt and hop flavours. And I use 150 gm hops per 22 litres. So I will risk it. Defo report back.
Looking forward to hearing your results! I never tried that much, I'm quite curious now.
 
Has anyone tried adding low-dose sulphites to beer at bottling time as an antioxidant and preservative? Would that prevent bottle conditioning?
Based upon what I have done for wine, cider and mead, I would think that the sulfites would inhibit the yeast. I am sure there are a lot of articles in those forums regarding dosage; perhaps there have been experiments where someone did a half dose or quarter dose? Yeast still have some life, and also extra O2 protection?
 
I really believe that ascorbic acid makes a difference. I've brewed some NEIPA's, bottled all of them and most of my batches are still nice and drinkable after 4-5 months. No color change, no cardboard taste. I use 5g for 20L batches, added directly to each bootle using syringe
 
Has anyone tried adding low-dose sulphites to beer at bottling time as an antioxidant and preservative? Would that prevent bottle conditioning?
Probably not as it does not kill yeast (at least not in the amount usually used) but inhibits the yeast from multiplying (is this correct English?).
 
Has anyone tried adding low-dose sulphites to beer at bottling time as an antioxidant and preservative? Would that prevent bottle conditioning?
I tried once with a bottled conditioned Hazy IPA (ish) beer. At the time I did not have a strategy for measuring out the very small amount of a campden tablet that I would need for a single bottle. I just added a tiny amount. It is hard to say if I added too much or too little. In tasting, I felt like that bottle had a little more hop character than the control bottle, but it had much more oxidation than the bottles with the head space purged of air. I did not notice any issues with bottle carbonation.

My mini trial pointed at the amount of air left in a "standard fill" bottle as being the first issue that needs to be tackled. If you can reduce the amount of air/oxygen in the bottle to start with, likely anti-oxidants can be effective at cleaning up small amount of oxygen.

I to tend to think that oxidation of bottle conditioned beers is an issue that does not get the attention it deserves. In a recent trial batch that I bottled (a trial of US-05, Voss, and Lutra) I recently cracked open 3 bottles that were maybe 6 weeks in the bottle (stored at room temp most of the time). The US-05 bottle was darker with a noticeable oxidation character. The Voss and Lutra bottles did not show a color change but the flavors were bland and muted.

This is something that I have been wanting to cycle back to for a long time (including adding Ascorbic Acid into the trial, with better control over the measured amount added).
https://www.cascadeshomebrew.com/avoid-bottling-oxidation-for-hoppy-beers/
 
I tried once with a bottled conditioned Hazy IPA (ish) beer. At the time I did not have a strategy for measuring out the very small amount of a campden tablet that I would need for a single bottle. I just added a tiny amount. It is hard to say if I added too much or too little. In tasting, I felt like that bottle had a little more hop character than the control bottle, but it had much more oxidation than the bottles with the head space purged of air. I did not notice any issues with bottle carbonation.

My mini trial pointed at the amount of air left in a "standard fill" bottle as being the first issue that needs to be tackled. If you can reduce the amount of air/oxygen in the bottle to start with, likely anti-oxidants can be effective at cleaning up small amount of oxygen.

I to tend to think that oxidation of bottle conditioned beers is an issue that does not get the attention it deserves. In a recent trial batch that I bottled (a trial of US-05, Voss, and Lutra) I recently cracked open 3 bottles that were maybe 6 weeks in the bottle (stored at room temp most of the time). The US-05 bottle was darker with a noticeable oxidation character. The Voss and Lutra bottles did not show a color change but the flavors were bland and muted.

This is something that I have been wanting to cycle back to for a long time (including adding Ascorbic Acid into the trial, with better control over the measured amount added).
https://www.cascadeshomebrew.com/avoid-bottling-oxidation-for-hoppy-beers/
This is an easy fix, just leave as little head space as possible. We had multiple experiments here that all confirmed it, the air in the head space is the real driver of bottled beer`s oxidation issues. 5mm head space is the save spot for me. Lower and you risk cracked bottles due to thermal expansion of the liquid when temperature changes. 3 mm also worked for me... but to be on the safe side, I use 5mm.
 
If you use plastic bottles you can get zero headspace; fill the bottle to the proper level with just a little headspace, then squeeze the bottle before you cap it. The bottle will expand back as it carbonates. Plastic bottles are more permeable to oxygen than glass bottles (I don't know if the amount is significant but I suspect it is) so long-term glass will still be better if you can eliminate the headspace. And there's a way to do that but I have trouble pulling it off...

Fill the bottle to the base of the neck normally. Then squirt a little beer into the bottle so it foams up to the top. Then cap it. The foam will displace the air with bubbles full of CO2. You could probably do about the same thing (I haven't tried it) by filling the bottle to the proper level, then shaking it gently to get it to foam up. If my beer is really gassy when I bottle it, the priming sugar makes it foam up and I get this for free.

I don't brew styles of beer where a little oxidation will hurt anything. So I either use the plastic-bottle-squeeze-it thing, or I use big bottles (quarts, 22s, and liters) so the amount of air in the headspace is not as significant compared to the volume of beer. Most of my beers are still good after 6 months if they somehow make it that long. :mug: But if I could use sulfites or AA as a preservative, maybe I could try some beer styles I'm not comfortable brewing with my equipment, like Festbier. (Costco didn't get any Hofbräu Oktoberfestbier this year, and the Paulaner O'fest only comes in a "Best of Munich" combo case.)
 
DuncB - But if the beer I drink contains Vit C, I will never get a cold......if ever you are in Kettering UK call in and sample one. Thanks.
I haven't had a cold for ages either using less Vit C than you. But I reckon that the prime minister down here sealing the borders up tighter than a crabs arse at 50 fathoms has had a lot to do with that.
Plus I have to wear an N95 mask at work and on the train helps. !!!
Love to get the beers in Kettering in. Haven't been there since we stopped there on the way to a wedding when we had that monsoon of rain in uk in the noughties I think.
 
Back
Top