• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SS Brew Buckets, CF Chiller, spunding valves, and misc. hardware

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sean Monaghan

Well-Known Member
Joined
Aug 19, 2018
Messages
63
Reaction score
6
Hi HBT!

I'm located in north Delaware. Images are below the descriptions. Looking for local pickup for the larger items, willing to ship the smaller items, but you pay. I am open to any and all questions about the items below, thank you.

I have 2x SS Brew buckets. These are in decent shape. The etched volume markings are faded from cleaning, the plastic feet need to be replaced, but they still work great! As for the lid gaskets - one is stained and was more heavily used. About 6 beers through it. The other gasket was used once and still looks new. Each bucket comes with a pack of new o-rings that you can install at your discretion. They also both have adhesive temp strips on them. These will be tough to let go, my asking price is $105 each, $200 if you take both. First come first serve as to who gets what.

I have 2x spunding valves that I put together with brand new CMB ball lock QD's. They both have spring-loaded adjustable PRVS - One brass, one stainless - and pressure gauges that go up to 60 psi. Asking $35 each

I have a SS Brewtech sample valve that came off of my unitank. I moved on to the kind with the knob on top, so wondered what I could get for this. Asking $35

I have an OEM knob style sample valve as well. This will accept a pigtail should you decide to use one. Note the faucet tip is a bit rough as shown by the third photo. Asking $35.

There is a 6 trunk Co2 manifold outfitted with 1/4 barbs and shutoff/check valves. This was never used as my keezer never came together, would like to get $40

I've also got a T-style 3-way valve (1/2" NPT) that turns 90 degrees. I'm sure the handle could be modified to spin 360 if you wanted. Never used, small dent in the arrow plate as shown, looks like it could easily be bent back if you care about that. asking $15

DIY Counterflow chiller is also for sale. Asking $40 for this one, used twice. Selling since a good opportunity to upgrade to a stainless chiller came across, so I have no need for this any longer. The internal tube is 25' long, 3/8" ID, and it's hooked up to two female camlocks. The outside tube connects with standard brass garden hose fittings.

I also have a paintball tank CO2 thread adapter for a standard taprite style regulator. Never used, it's just sitting. Asking $5.

20200826_185048.jpg
20200826_184905.jpg

20200917_085859.jpg
20200826_184732.jpg


20200917_090126.jpg
20200917_090136.jpg
20200917_090200.jpg
20200907_154727.jpg
20200917_091436.jpg
20200816_162944.jpg
 
The brew buckets have sold. Thank you everyone for your interest!

Items remaining are:
- 3 way T style valve
- Spunding valve with brass relief valve
- Counterflow Chiller
- Knob style sample valve
- Paintball tank co2 adapter
 
Back
Top