Regulator outlet thread size?

[GateTwelve]

Does anyone know what the thread size is for the female outlet fitting on any particular regulator? I'm referring to the thread that the outlet valve is screwed into on the regulator housing. I'm thinking about a setup which would require I remove the outlet valve and barb.

Specifically, I'm looking at:
http://www.midwestsupplies.com/economy-regulator.html
or
http://www.beveragefactory.com/draftbeer/regulator/double/commercial_double_gauge_beer_co2_regulator.shtml

But information for any moderately priced regulator would help me a lot.

Thanks

 

[yogensha]

Mine are all 1/4" NPT. Some regulators use left-hand threads on the high pressure side, so check first.

 

[mordantly]

most are 1/4 but my mig has 1/8 pipe. the tank stem is 1/4 pipe.

 

[GateTwelve]

That'd be great if the one I get has 1/4 NPT on the regulator female outlet (provided it's not left-hand threaded). Then I can connect it directly to one of the 1/4" threaded quick disconnects right to the keg, and use a paintball tank and remote line for a portable setup.

Thanks guys

 

[mordantly]

but see it is npt (national pip tread) not flare (self sealing taper) as is the keg disconnect

 

[GateTwelve]

but see it is npt (national pip tread) not flare (self sealing taper) as is the keg disconnect

Upon a second look, you would be correct...Looks like I have to begin my search for a 1/4" female NPT to 1/4 female flare thread adapter/coupler.