DoubleAught
Well-Known Member
4.3 Oz of dextrose per http://www.tastybrew.com/calculators/priming.html going off a generic APA.
My Kentucky Bourbon Barrel Ale attempt
- Thread starter OHIOSTEVE
- Start date
Help Support Homebrew Talk:
Buckeye_Brewer1
Well-Known Member
Henry / Kaiser,
Did either of you two Charr your oak chips before soaking in the bourbon. I read to and charred mine wrapped in foil in the oven at 450 for 50 min. I figured that would better simulate the bourbon barrel compared to general oak. I'm going to be patient allow this to condition but curious on strategy.
Did either of you two Charr your oak chips before soaking in the bourbon. I read to and charred mine wrapped in foil in the oven at 450 for 50 min. I figured that would better simulate the bourbon barrel compared to general oak. I'm going to be patient allow this to condition but curious on strategy.
DoubleAught
Well-Known Member
I did not, although it sounds like a good idea. I'm planning on letting mine condition for a good month or more. I had a couple last weekend at one week bottled, and a couple today at two weeks. The difference is a week is amazing. After six weeks this beer is going to be a favorite, I can tell already.
Buckeye_Brewer1 said:
I did not either but I have heard charring oak is good since oak barrels are charred. I just racked mine to secondary so Im excited to see what its going to taste like in the coming weeks.
Let me know how the charring affects the flavor profile, I might have to incorporate that next time I brew this.
Sorry, new to BeerSmith2...but trying to plug all this in and having a heck of a time getting these ingredients to match the recipe and keep at 1.070 OG. Please tell me what I'm doing wrong. Or is this close enough?
KBBA Clone
Wood Aged Beer
Type: Extract
Batch Size (fermenter): 5.00 gal
Boil Size: 2.82 gal
Boil Time: 60 min
End of Boil Volume 2.60 gal
Final Bottling Volume: 4.60 gal
Fermentation: Ale, Two Stage
Ingredients:
9 lbs Light DME (8.0 SRM)
1 lbs White Wheat Malt (2.4 SRM)
1.25oz Kent Goldings @ 60 mins
0.50 oz Fuggles @ 5 mins
Wyeast #1098 - British Ale
Est OG = 1.080
Est FG = 1.020
Est ABV = 8.0%
Bitterness = 8.9 IBUs
Est Color = 8.9 SRM
I think I like BeerTarget better for ease of use, but lots of people are using BeerSmith so I'd like to get used to it.
KBBA Clone
Wood Aged Beer
Type: Extract
Batch Size (fermenter): 5.00 gal
Boil Size: 2.82 gal
Boil Time: 60 min
End of Boil Volume 2.60 gal
Final Bottling Volume: 4.60 gal
Fermentation: Ale, Two Stage
Ingredients:
9 lbs Light DME (8.0 SRM)
1 lbs White Wheat Malt (2.4 SRM)
1.25oz Kent Goldings @ 60 mins
0.50 oz Fuggles @ 5 mins
Wyeast #1098 - British Ale
Est OG = 1.080
Est FG = 1.020
Est ABV = 8.0%
Bitterness = 8.9 IBUs
Est Color = 8.9 SRM
I think I like BeerTarget better for ease of use, but lots of people are using BeerSmith so I'd like to get used to it.
Wreck99 said:
OG seems a bit high unless you wanted a higher ABV. Commercially this beer is about 6.8% I think. The extract recipe is talked about a bunch in the beginning of the thread and I was going to do it before i switched to all grain. I don't use beer smith a whole lot, hope that helps though.
Yeah I usually use brewtarget but both give me that higher og basedon the recipe. I put everything in based on the thread. Just wondering what I'm doing wrong.
DoubleAught
Well-Known Member
Here she is boys! She's as good as she looks.
Finally getting around to brewing this, hopefully this week. Just have to go out to the LHBS and get the ingredients. Been critiquing the recipe based on feedback on this thread (thanks guys) and here's what I came up with for the base ale...
7.5 lbs Briess Golden Light DME -OR- 9 lbs Briess Golden Light LME (Not sure it matters)
1 lb Crystal 40 -OR - Caramel 40 (whatever they have)
1 lb Carapils
1 lb Flaked Wheat
1.25 oz Kent Goldings @ 60 mins
0.50 oz Fuggles @ 5 mins
Wyeast #1098 - British Ale
Est OG = 1.069
Est FG = 1.017
Est ABV = 6.8%
Bitterness = 11.0 IBUs
Est Color = 12.1 SRM
Got this information using BeerSmith.
7.5 lbs Briess Golden Light DME -OR- 9 lbs Briess Golden Light LME (Not sure it matters)
1 lb Crystal 40 -OR - Caramel 40 (whatever they have)
1 lb Carapils
1 lb Flaked Wheat
1.25 oz Kent Goldings @ 60 mins
0.50 oz Fuggles @ 5 mins
Wyeast #1098 - British Ale
Est OG = 1.069
Est FG = 1.017
Est ABV = 6.8%
Bitterness = 11.0 IBUs
Est Color = 12.1 SRM
Got this information using BeerSmith.
DoubleAught
Well-Known Member
Think I may carb a little less next time I make this. I have about 8 bottles of it left and the latest ones are way over-carbed. It actually has me bloated and it's bubbling much like a soda does.
I have added a little vanilla but I think I am going to add more. Probably total around an ounce. I also added about 250oz of bourbon, not a whole lot but it needed some more.
The brewer said carb at 2.8 which is quite a lot but I don't want mine to be too carbonated. Maybe the extra sugar is to ensure it carbs probably, does the high alcohol (mine is around 8%) retard the ability of the yeast to carb effectively?
The brewer said carb at 2.8 which is quite a lot but I don't want mine to be too carbonated. Maybe the extra sugar is to ensure it carbs probably, does the high alcohol (mine is around 8%) retard the ability of the yeast to carb effectively?
Buckeye_Brewer1
Well-Known Member
I assume 250 oz of bourbon was a typo. Did you mean 25 oz or 2.5 OZ? I dont know about the alcohol content inhibiting carbonation but it is a good question.
Just moved mine to secondary this week over Knob Creek soaked oak cubes and a lil vanilla. Can't wait to try this when its all done.
DoubleAught
Well-Known Member
oooOOO Knob Creek make me a very happy boy...good call!
Yep, didn't want to cheap out on this one 
I think that'll be my problem. I have a couple batches in bottles now, so I gotta start drinkin! I'm not putting this beer on draft, because that'll be dangerous and I want it to last
I think that'll be my problem. I have a couple batches in bottles now, so I gotta start drinkin! I'm not putting this beer on draft, because that'll be dangerous and I want it to last
I wish I had a keg setup but Im a poor college student. Maybe next year when Im working full time. For now its just bottles.
What volume of CO2 are you going to bottle at?
Not even entering the keg with this bunch. I'll just do the standard 5 oz priming sugar to the batch and bottle the lot, unless you suggest a different amount? I thought 5 gallon batches were the standard 5oz. I guess it's easier to control the CO2 volume in the keg setup, but I know me and I love this beer retail so if my concoction is anywhere close I'll be pumping the tap like its a gas pump lol. It's safer to store the bottles
Wreck99 said:Not even entering the keg with this bunch. I'll just do the standard 5 oz priming sugar to the batch and bottle the lot, unless you suggest a different amount? I thought 5 gallon batches were the standard 5oz. I guess it's easier to control the CO2 volume in the keg setup, but I know me and I love this beer retail so if my concoction is anywhere close I'll be pumping the tap like its a gas pump lol. It's safer to store the bottles
The brewery told me they use 2.8 in bottles but Kaiser carb'd for a general APA which is about 2.5 and said it was too much so I'm not sure how much I should do. I'll probably do around 2.5-2.6 volumes CO2, not sure how many ounces that comes out to but their are calculators online.
Well I'm game. Do you know how much priming sugar 2.8 is?
Pretty cool tool, thanks for sharing. That says for my 5 gallon batch, 2.8 CO2 volume sitting @ 70F is 5.3 oz.
Now I wonder how long it will take to hit that volume in bottles.
Now I wonder how long it will take to hit that volume in bottles.
So I just cracked open my 1st sample of KBBA clone after being in bottles for 3 weeks. OMG its just about perfect spot on to the original. Maybe it'll get better with age but I love it the way it is now too.
Buckeye_Brewer1
Well-Known Member
That is great to hear!!! So far I'm not so fortunate. I decided to char my wood chips prior to soaking and ended up leaving them in the secondary for 10 days which I think was too much. I only wanted to keep them in for 5 - 6 days but I got too busy and was not able to bottle when I wanted to. I think my base beer is pretty close to Kentucky ale but I have much more of a wood taste compared to the KBBA. I think wood taste takes a long time to mellow out. Its still a good beer but not as I expected.
nspaldi0
Well-Known Member
Wreck9. What type of oak chips did you use and how much? I see you soaked the chips in knob creek, but for how long? Did you put the cubes and more bourbon in? Also, how much vanilla, beans or extract? I'm wanting to brew this as my first beer on the electric system.
3 oz of med french toasted oak cubes, soaked in 250ml of knob creek for the duration of primary (3 wks). Then added 150 ml more into secondary, and 150ml more to bottling. Added 1.5oz vanilla bourbon extract (found at wegmans) to secondary and another 1.5oz to bottling. Ill tell ya, after now being bottled for over a month this beer is spot on to the original (it was ready at 3 wks bottle time). All my drinkin buds agree. Not bad for extract brew. Next time ill have to try it AG and see if it tastes any different.
