Can you give a rundown of the type of skin you used, as well as the type of wood you used to make the top?
Complete parts list (sorry for the detail, this is as all-inclusive as I could get, for those that need it to the penny....) Also included a few more pics to-date.... though the kegging goodies are still in the mail....
Frigidaire 7.2 cft Freezer $241.68 (after tax)
1x 4’x4’ Marble Laminate @ $9.99
1x Quart Laminate Contact Cement @ $5.97
1x 4’x4’x¾” Particle Board @ $7.79
4 x Oak Stair Riser – 7-3/4” x 42” @ $8.49
1x Package 3/8” Oak Plugs @ $1.84
Screws
Wood Glue
1x Finishing Nails @ $2.19
Tube Red Oak Wood Filler @ $4.97
3x 4’x 4’x1/8” Oak Veneer @ $16.48
1 x 8’ Base Board @ $9.97
3x 8’ Beaded Rope Trim @ $12.99
2x 7’ Leaf-Vine Banded Trim @ $11.99
2x 7’ Beaded Crown Molding @ $14.99
1x 8’ Oak Beaded ¼” Round @ $10.99
1x 8’ Oak Plain ¼” Round @ $8.79
1x 6’ Rail @ $14.99
1x 4’x8’x1” Super Tuff R Insulation @ $15.55
1x Roll Foil Tape @ $7.74
1x Package ½” Plastic Wire Clamps @ $1.59
1x Can Black Spray Pain @ $0.97
6x Large Rosettes @ $2.67
6x Small Rosettes @ $2.37
1x Black Caulk @ $2.48
2x - Construction Adhesive @ $2.49
1x Quart Varathane Wood Sealer @ $5.50
1x Quart Varathane American Walnut Stain @ $6.79
3x Cans Minwax Clear Gloss Varnish @ $5.97
120, 140, 180, 200 grit Sand Paper
Steel Wool
Un-wired Ranco Temp Controller @ $64.95
KegConnection Premium 2-Keg 5# Kit w/ adjustments @ $450 or so.
- Eliminated regulator/manifold in place of a single body/dual valve regulator on bottle and dual valve regulator in keezer with 6’ of gas line.
- Perlick Taps
- Add another 5 # bottle (2 total)
- 14" Stainless Drip Tray
Total: $1104.20 (to-date... much more to come)