keezer

Hello everybody, I finally got around to posting my completed keezer build. I based it off of a number of designs that I saw on this site. I found that I liked the idea of the bar top keezers I had seen, but knew that having taps on the site wouldn't work with my current dog and any future...

Excellent condition keezer with Johnson Controls A419 temperature controller. This keezer holds 5 kegs, and includes 5-way CO2 manifold, draft tower with 5 taps, 5 beer lines and ball-lock quick disconnects. It's ready to go, lines and taps cleaned... I'm selling because my back can't handle...

After a move from WNY to Katy Texas 2 years ago I am finally getting back to brewing!!! An important step is wrapping up, my new kegerator is finally getting finished! The design was a mesh of a few things from the forums, with modifications to limited location/size/etc. In order to get it...

Hi everyone, I'm from Fairfield County, CT and I'm trying to make myself a 4-tap keezer. The part I'm really struggling with is finding a chest freezer that is big enough and relatively cheap. Everything that is new seems to be about 400+ dollars. I was hoping to stay in the 100-200 range. I...

Hey all! New member here. Been brewing since last August and quickly decided to ditch bottling and start kegging. I searched all around to find creative keezer designs that maximize the useful space of a freezer. This is what i came up with. Keezer build https://imgur.com/gallery/khApoOD Holds 6...

Hi all, I'm finally upgrading my kegerater to a keezer. Thanks everyone who contributed info to this site, it's been super helpful in this process. I got a Solstar CF-400 but it has a wire going from the top of the back into the lid (see photos). I think it's for a light or a sensor, I'm not...

I stopped brewing a few years ago. Selling everything I have. Everything was purchased new and is in like new condition. Located in Bethel, Vermont. At this time I want to deal local only. No shipping. I can provide more pictures. Bayou Classic 10 gallon, Stainless Kettle with...

Just purchased a used GE 7.0 cubic ft chest freezer on marketplace for my first keezer build! Here is a list of my equipment: - GE 7.0 cf Chest Freezer - One 2x8x10 wood board for collar - Three cans of gloss black Rust-Oleum paint - Inkbird ITC-308 - AC Infinity Quiet Muffin Fan (On the way...

$25 each, 5 available, San Francisco local pickup only

I'm new to having a keezer having always bottled my beer. I recently picked up a 7 cu ft freezer and have it setup with temperature controller (set to 45) 5 lbs co2 (attempted to be set to 12) and a couple of kegs. My setup runs from my regulator through a 4 way manifold and out. The beer lines...

$100 3 - perlick faucets, stainless 4 - 4” shanks, stainless 1 - 4-way gas manifold

Hi all! First post here.. I have a 4 tap dispenser I made that I attached to my bar. The keezer is on the opposite side of the wall where I will house my 4 kegs and CO2. I bought all my beer line (3/16" ID) and also purchased a 34 cfm tower chiller. The question I have is, the line that came...

I got hold of a cheap enough freezer so I can commence my new keezer and retire the TARDIS to a fermentation chamber for my incoming SSbrewtech Concial i'm planning to buy. Now I've heard differing reports from my colleagues who are certified fridgies. most say attaching the wood directly to...

Micro-HERMS / Fermenting / Keezer $1,200 FOR EVERYTHING Brewing 1 16Gal Stainless Brew Kettle - Bayou Classic 1316 Tri-Ply Stockpot w/lid $ 95.00 Bottom port w/3-piece Stainless Ball Valve - Silver Soldered, 1/2in Male NPT...

Hello all! Been a long time since I posted anything. Have not really been active in the homebrew scene for a while, but getting ready to get back on the horse (or induction burner rather). While going through and reorganizing my brewery, I wanted to do an overhaul of my keezer. When I popped...

Decided to convert the old fermentation deep freeze from STC-1000 to a IoT web enabled thing. I am using the BrewPi Remix firmware for the arduino and Fermentrack on the front-end for the pi. Most of the parts were leftovers from an old project, but I will still link what I used. Parts: 1 -...

I'm fearful of the answer, but here goes... I get a lot of condensation in my kegerator, enough that two EvaDry units can't keep up. Every so often I have to pull the kegs out and ShopVac standing liquid @ the bottom. The last time I did this, I was dismayed to see the lining of the freezer...

Hi all, For the past 2 (!) months I've been trying to fake making a 6 tap Keezer. Some things that I have learned the hard way: - I should never be allowed to use power tools - You don't get alot done when you start drinking out of the existing Kegerator - Wood is expensive, measure properly...

Hey guys, So, I have a commercial undercounter fridge that I use as a "keegerator" or something. It will hold three corny kegs and a CO2 tank (I only have two at the moment). Currently I just have picnic taps on these, and I open the door whenever I want a pour. It is basically a large cooler...

All of these parts are like new. I downgraded my keg system and no longer have a need for them. With this you can turn a deep freeze or refrigerator into a Keggerator. Perfect for somebody who homebrews and wants to take the next step to kegging. I am willing to answer any questions. Bought new...