SamuraiSquirrel
Well-Known Member
I built 2 counterflow chillers (the bobby_M design exactly as shown here https://www.homebrewtalk.com/f51/counterflow-chiller-tutorial-51793/)
They turned out great but I decided to go a different chilling route after 1 use. One chiller was used for one brew. The other has never been used. They've both been hooked up to the hose to test the joints for leaks. Both passed - not a drip.
The outer hose is a 5/8" rubber hose and the inner is 3/8" copper.
I'm not really looking to make any money off them but would like to recoup my material cost.
Let me know if you have any questions.
They turned out great but I decided to go a different chilling route after 1 use. One chiller was used for one brew. The other has never been used. They've both been hooked up to the hose to test the joints for leaks. Both passed - not a drip.
The outer hose is a 5/8" rubber hose and the inner is 3/8" copper.
I'm not really looking to make any money off them but would like to recoup my material cost.
Let me know if you have any questions.