Sold Selling everything all grain brewing setup with pump, fittings, chiller, etc. - NJ/NYC metro area

[Tjm276]

I have a bunch of stuff that hasn’t been used in a couple years as I moved on from the hobby. $500 will take everything but if you’re interested in anything make me an offer. Everything works and is “clean” except for 2 of the korny kegs that have some beer remnants in them. Not pictured are the shanks/taps for the kegerator setup. I have 4. They will need some TLC. I also have the “out” side ball lock connectors for hooking up the korny kegs. Everything has stainless steel camlock fittings for use with the pictured pump. The silicone hoses are most likely trash but the fittings most certainly are not.

PM with questions/offers

Kegco kegerator, 5lb co2 tank, 4 way gas regulartor, 4 ball lock beer side connectors (not pictured), sankey coupler: $200 SOLD


Propane burner: $25

8 gallon SS brew pot with ss camlock fittings, ball valves, thermometer, sight tube, counterflow fittings: $75: SOLD


12 gallon mash tun w/ false bottom, 12 gallon HLT, ball valves: $150
***NOTE: Hoses and camlock fittings in the pictures are NOT INCLUDED as they have been sold separately.***

pump w/ ball valve: $75
***NOTE: Camlock fittings shown in the picture are NOT INCLUDED as they have been sold separately.***

(4) 5 gallon ball lock korny kegs plus extra seals: $200 for all 4 SOLD


Yeast starter agitator: $25

Fermentation temperature controller w/ thermocouple and reptile heater: $35

Counterflow chiller w/ SS camlock fittings: $25

Copper immersion chiller: $75

5 gallon glass carboy w/ handle: $35

PM with realistic offers. Willing to meet within a reasonable distance of 07080.

 

[Airborneguy]

Picture of the kegerator?

 

[Tjm276]

Picture of the kegerator?

Hopefully I didn’t misuse the term “kegerator.” What I have is probably better described as a conversion kit. I have all the internals that can be installed into your refrigerator or chest freezer.

 

[leedspointbrew]

Mildly interested in the kettle, but located in Galloway NJ. Would need to meet you somewhere around Lakewood, if you're willing.

 

[Tjm276]

Mildly interested in the kettle, but located in Galloway NJ. Would need to meet you somewhere around Lakewood, if you're willing.

I am away this week so let me think about it. I’ll get back to you over the weekend…

 

[IslandLizard]

Please disregard my note on individual pricing of each item.

Prices are listed, they're placed in between the pictures.
Our listing requirement has been met, all is good on that front.

 

[cubalz]

Sent you a PM on the Fermentation temperature controller w/ thermocouple and reptile heater

 

[Jaybird]

Just the copper in the chiller is worth almost $500 ...
Cheers
Jay

 

[westbru]

Can't figure out how to pm you but I would be interested in the kegs.

 

[Tjm276]

Hey sorry for the delay, guys. I was on a ski trip last week.

Mildly interested in the kettle, but located in Galloway NJ. Would need to meet you somewhere around Lakewood, if you're willing.

I can do that. PM if you want to pull the trigger.

Just the copper in the chiller is worth almost $500 ...
Cheers
Jay

Snatch it up cheap!
In all seriousness, my loss could be someones gain. I made that copper chiller myself and it was a gamechanger for my brewing. Just haven’t brewed in a few years now and need to clear out some space in the basement.

Can't figure out how to pm you but I would be interested in the kegs.

Hmm. Interesting that you can‘t PM. When do you want to meet?

 

[westbru]

Hmm. Interesting that you can‘t PM. When do you want to meet?

Maybe I’m just missing it but I can’t see where to send PM. I’m in West Orange, NJ. I have time tomorrow afternoon/evening and I can meet somewhere just let me know if that works.

 

[Chorgey]

Maybe I’m just missing it but I can’t see where to send PM. I’m in West Orange, NJ. I have time tomorrow afternoon/evening and I can meet somewhere just let me know if that works.

I believe that you need to have 5 posted messages before you can PM

 

[IslandLizard]

I believe that you need to have 5 posted messages before you can PM

That's correct. But the OP has now reached that quota, and can reach out to those who haven't (yet).
Please keep confidential info inside convos, they're truly private.

BTW, one can see a member's post count in the left sidebar or by clicking on a member's name or avatar to access their full profile.

 

[Tjm276]

Maybe I’m just missing it but I can’t see where to send PM. I’m in West Orange, NJ. I have time tomorrow afternoon/evening and I can meet somewhere just let me know if that works.

PM coming your way...

 

[westbru]

Thanks

 

[Tjm276]

Kegs are gone.
Kettle is pending…

 

[Tjm276]

Kettle is sold.

 

[leedspointbrew]

Kettle is sold.

And pretty perfect. Thank you!

 

[Tjm276]

Kegerator Conversion equipment is sold.

 

[Tjm276]

Fittings and hoses are sold.

 

[Tjm276]

Everything is gone. Happy Brewing!