Can you run from the terminalAny ideas?
. /etc/os-release
echo "$VERSION"
and post the output here
also try running sudo pip install pymysql
and report the output.
Can you run from the terminalAny ideas?
OK I am getting data on my load cells now and the log appears to be working. The keg column isn't showing though. It was turned off in the configuration menu, so I turned it back on. Also made some changes to how the beer color is displayed, but nothing changed. No keg column and beer color is the same.Can you back up to Buster?
correct not tested but your error occurred is outside of the load cells in the main python code for all RPints. Even if you didnt have load cells that error should have occurred, but from your outputs of version and attempt to install pymysql, it did exist as a module.I saw that load cells were not tested with Python 3, and thought that could be the cause
I can throw another pi at it, would be a 3b+ though if you want extra eyes. The same error occurred prior to me adding 2.7 to the mix. It also occurred on my first attempt on a fresh install. I should have mentioned. If I ran python I could import it, no error. It does seem to be a bug, but going back a version definitely solved it. I will note that I did my first full install a couple weeks ago and it still had python 2.7 on it, same errors. Last one i did, did not, only 3.9correct not tested but your error occurred is outside of the load cells in the main python code for all RPints. Even if you didnt have load cells that error should have occurred, but from your outputs of version and attempt to install pymysql, it did exist as a module.
Currently Rpints tries the python 2.x approach to mysql and if that fails falls back on 3.x approach and uses that. I currently have python 3.9 install on my Pi 3 and its working fine so im really confused.
Maybe i need to update to latest on my pi and test again which is 50/50 this weekend.
Finally got a new Pi OS installed and tested, the error is with the installer. If you dont install flowmeters and skip to load cells it didnt use the correct packages and therefore never installed pymysql.When I told it to install the load cells it did error out. Reinstall did not provide any error. I also found this peculiar.
from the terminalWhat's the best plan of install if no load cells or flowmeters are going to be used but I have raspberry pi os bullseye installed?
Thank you I'll get on with that today.from the terminal
curl -L install.rpints.com | sudo base
It will prompt you what you want to install (Flowmeters/mqtt/load cells) and just enter N for the features you dont want.
it shouldn't, its just a webpage (and python for flowmeters) so apache/nginx and python should handle the OS partDoesn't matter if 64 bit or 32 bit install of the OS?
Had a few issues as it didn't know what base was.from the terminal
curl -L install.rpints.com | sudo base
It will prompt you what you want to install (Flowmeters/mqtt/load cells) and just enter N for the features you dont want.
Remove the \admin at the end or just go to http:\\localhost or whatever the static IP is of the PiAn update, it's installed and I'm filling in beer entries on the tap list and other parameters.
When I save that and logout, I have a screen with the login menu. How do I get the Raspberry pints page up ( the front page ) with the beer information that I've filled in?
Check /home/pi/.config/lxsession/LXDE-pi/autostart or if that file doesnt exists check /etc/xdg/lxsession/LXDE-pi/autostartHow do I disable it so I just open a browser and then open the pints webpage?
I use Alt + F4 to close the browser, F11 should also exit full screen modekey combo that shuts pints down?
Thank you I'll have a look at that tonight, I selected automatically start chromium I think when I set it up which was my downfall.Check /home/pi/.config/lxsession/LXDE-pi/autostart or if that file doesnt exists check /etc/xdg/lxsession/LXDE-pi/autostart
for
@chromium --kiosk localhost
you can just delete that line
I use Alt + F4 to close the browser, F11 should also exit full screen mode
check /var/log/rpints.log make sure there are no errors there.Pours aren't showing nor the amount remaining.
/dev/ttyACM0 is for USB/dev/ttyACM0
2022-09-26 16:51:43 RPINTS: Arduino says: C:1:4:0:300:200:30:250:0:0:1|
2022-09-26 16:51:43 RPINTS: listening to Arduino
2022-09-26 16:51:43 RPINTS: Sending Status;N;-1;0;0;|
2022-09-26 16:52:46 RPINTS: RT L 4 0 63132 62831 301 300 137 200
2022-09-26 16:52:46 RPINTS: Sending Status;N;-1;0;0;|
RT = Reset Tap"RT L 4" refers to this
Not that it matters, but What is your unit of measure for Temperature?it tells me to enter a valid number but won't accept 12 or 15
Ok i found the issue, the script was checking hidden inputs for validation which failed but showed up on the visible input. If you rerun the installer it will have an option to update, run that option and you will get the fixit tells me to enter a valid number but won't accept 12 or 15
I have theseadd some valves
The power supply description is Culver LED AC 110V-240V To DC 12V 8.3A(100W) Switching Power Supply Regulated Power Transformer Adapter for Industrial Automation, LED Strips,CCTV,RadCan I have more details about that, what kind, the connections and others stuffs please
In understand what you are saying, but it is not possible right now to configure your system for that without coding it upis there a way to have like several buttons for the same beer
Enter your email address to join: