Random Picture Thread

[bleme]

Looks like 15 pounds of fertilizer. Sure as heck ain't eatin' no friggin' carp!

You can pressure cook carp and it's just like tuna...

 

[KayaBrew]

You can also put frosting on a turd and say it's a cup cake, but I'm still not eating it...!

 

[GrogNerd]

& sewer rat may taste like pumpkin pie

 

[Homercidal]

You can pressure cook carp and it's just like tuna...

My grandma used to can Redhorse suckers with vinegar to soften the bones.

I don't remember if it was any good, but they ate it. Of course they also lived through the depression, so...

 

[GilaMinumBeer]

Never understood the aversion to Carp here. Some say "It's disgusting because it is a bottom feeder! Do you have any catfish instead?" others say it's too boney and too much work to eat.

Several Asian and European cultures consider Carp a delicacy. But, I don't care for any kind of fish as a food. They all taste/feel like eating a dirty, sometimes salty, sponge to me.

 

[triethylborane]

woah, things getting just too heated for my senses fellas over fish talk (no pics, lame) so have some smooth jazz

 

[BikerMatt]

 

[rlmiller10]

I always preferred a 54 cal black powder rifle. If they were near the opposite shore you could pop them clear out of the water and up on the shore.

But I do agree with the fertilizer comment. At least out of the muddy crick that ran through our farm.

 

[ifnotuthenwho]

They put in the effort to remove the door only to find a brick infill.

Thanks. I've figured out that the GIFs aren't displaying properly on the phone app. The only thing it was showing me was the firefighters grinding on the door. Then it would just repeat.

It makes much more sense when watched on the web page where I can see the whole thing.

 

[KayaBrew]

One time, as a kid I caught and landed a 35 pound carp on 6lb test line while my Dad's boat was docked in the Thousand Islands. It took more than an hour. I was so hoping it was a huge Pike or muskie!

 

[day_trippr]

Great story - doesn't matter if it wasn't a muskie
I know quite a few C&R folks that will flyfish for carp and they love it...

Cheers!

 

[BongoYodeler]

One time, as a kid I caught and landed a 35 pound carp on 6lb test line while my Dad's boat was docked in the Thousand Islands. It took more than an hour. I was so hoping it was a huge Pike or muskie!

The Thousand Island region is probably my favorite place on the planet. We used to own a cottage on Wellesley Island. I've caught a boatload of pike over the years, (no muskies though), and a few large carp. But none approaching 35 lbs!! That must have been exciting.

 

[KayaBrew]

The Thousand Island region is probably my favorite place on the planet. We used to own a cottage on Wellesley Island. I've caught a boatload of pike over the years, (no muskies though), and a few large carp. But none approaching 35 lbs!! That must have been exciting.

We used to keep our boat at a marina in Clayton (that's where I caught the carp). I haven't been up there in more than 20 years...I'm afraid to see how much more it's been built up. We spent many summers as a family up there on that boat.

 

[nmfree]

It's Wednesday, try to hang on until the weekend!

 

[TheDudeLebowski]

Too well done. Fail.

 

[TheDudeLebowski]

Haha, Big Money Waste, Bring My Wallet, Burn My Wealth, etc etc is accurate. Ive bought all of mine used, luckily I do my own maintenance, so that really help to keep costs down. Parts on these old BMWs are getting quite expensive and sometimes quite hard to source. The water pump on my 91 M5 went poof at 25k miles, but BMW produced the impeller in plastic.





Yes, that is a S38B36 in my 91 M5. I have a few VAC internals in the engine and run a D'Sylva chip, current output is 357 bhp @7100RPM. Its going back to VAC for a head rebuild (its got 150k miles on previous), so Im hoping to get a few more ponies out to 380hp range with a few other modifications. I also have an 88 M5 with the S38B35:

So what's your source for parts besides eBay and the junkyard? I had the electrical harness burn out on my m3 because the bulb blew out :-/ Estimate was $5k just for one side of the front light. Bought an adapter for the burned out adapter on eBay from China for $5 and did a solderless hack job. Didn't want to take the 500 screws to solder it. Pretty much done blind. A year later I took it to my German mechanic and I was shocked he complimented me on the hack job. I was then looking for a new beemer and talking to him about the new LED lights. I told him I didn't trust the engineering. We've figured out the light bulb over a hundred years ago and I wasn't impressed on how they dealt with shorts. I'm scared to find out what happens with led. Always good to yank a German mechanic. 😀

 

[triethylborane]

So what's your source for parts besides eBay and the junkyard? I had the electrical harness burn out on my m3 because the bulb blew out :-/ Estimate was $5k just for one side of the front light. Bought an adapter for the burned out adapter on eBay from China for $5 and did a solderless hack job. Didn't want to take the 500 screws to solder it. Pretty much done blind. A year later I took it to my German mechanic and I was shocked he complimented me on the hack job. I was then looking for a new beemer and talking to him about the new LED lights. I told him I didn't trust the engineering. We've figured out the light bulb over a hundred years ago and I wasn't impressed on how they dealt with shorts. I'm scared to find out what happens with led. Always good to yank a German mechanic. ��

Lol, luckily Ive been in the clear with wiring harnesses.

I always cross reference realoem.com to see if there are other chassis that use the part Im looking for. I can usually rely upon a part being shared with an E32, so that sometimes helps me avoid markup when going online. I did buy a totaled out E34 M5 a few years that I randomly came across, the seller didn't realize what it was, picked off the parts I wanted, sold most via ebay, then donated the chassis to a scrapper.

Online:

m5board.com
bimmerforums.com
pelicanparts.com
rockauto.com (they have superb sources sometimes)
rmeuropean.com <- I luck out with these guys, they are local so no shipping $
fcpeuro.com
ecstuning.com
koalamotorsports.com


and VAC Motorsports for more engine specific parts. For M3s, bimmerforums is pretty good, though there are M3 specific boards that will be better. Luckily there are a lot more M3s around so parts supply seems better. Ill go to a dealer if I positively cannot find a part anywhere else.

If Im really up a creek, Ill do my best to refurbish a part. For example the E34 M5 has a large hydraulic fluid reservoir that supplies power steering and the rear suspension, which is hydraulically leveled (I removed this from both E28 and E34 long ago, SLS is rubbish). My canister was showing signs of pitting due to the hygroscopic fluid, I checked online for part cost, $700. Nah, lol thats not happening. I broke it down, cleaned it, painted it with Würth black paint.

One thing that really sucks about BMW is their heritage division does not produce parts. Mercedes classic still produces parts for old Mercs.

Edit: gotta have a pic in the pic thread. All genuine cobras:

 

[TheDudeLebowski]

Lol, luckily Ive been in the clear with wiring harnesses.

I always cross reference realoem.com to see if there are other chassis that use the part Im looking for. I can usually rely upon a part being shared with an E32, so that sometimes helps me avoid markup when going online. I did buy a totaled out E34 M5 a few years that I randomly came across, the seller didn't realize what it was, picked off the parts I wanted, sold most via ebay, then donated the chassis to a scrapper.

Online:

m5board.com
bimmerforums.com
pelicanparts.com
rockauto.com (they have superb sources sometimes)
rmeuropean.com <- I luck out with these guys, they are local so no shipping $
fcpeuro.com
ecstuning.com
koalamotorsports.com


and VAC Motorsports for more engine specific parts. For M3s, bimmerforums is pretty good, though there are M3 specific boards that will be better. Luckily there are a lot more M3s around so parts supply seems better. Ill go to a dealer if I positively cannot find a part anywhere else.

If Im really up a creek, Ill do my best to refurbish a part. For example the E34 M5 has a large hydraulic fluid reservoir that supplies power steering and the rear suspension, which is hydraulically leveled (I removed this from both E28 and E34 long ago, SLS is rubbish). My canister was showing signs of pitting due to the hygroscopic fluid, I checked online for part cost, $700. Nah, lol thats not happening. I broke it down, cleaned it, painted it with Würth black paint.

One thing that really sucks about BMW is their heritage division does not produce parts. Mercedes classic still produces parts for old Mercs.

Edit: gotta have a pic in the pic thread. All genuine cobras:

Thanks! I think I know the majority of those sites from the forums. The problem wasn't even the harness. It was the bulb that blew out. It didn't burn a fuse which caused it to burn all the way up the harness. Yea. That's normal.

I seem to remember I googled the part number which I found on a diagram that showed individual part numbers of the harness. Googling that then referenced me to somewhere in china on ebay for the melted out part. I was willing to throw away $5 if it didn't match the requirements. Worked fine except for the mertherferker short wire to splice it in.

Edit:

 

[GilSwillBasementBrews]

When did this turn into the BMW thread???

View attachment IMG_3328.jpg


Just to get back on topic.

 

[bluemoose]

View attachment IMG_0457.jpg

 

[smurfjuice]

Very nice, make your own ???

 

[nmfree]

Please stop trying to wedge things in where they don't fit.

 

[Jwin]

Mississippi in October

View attachment 1507863515242.jpg

 

[Jwin]

Please stop trying to wedge things in where they don't fit.

That's called a built-in cabinet

 

[Jwin]

Mississippi in October

Looks like Mississippi in late August/early September...

 

[BikerMatt]

Please stop trying to wedge things in where they don't fit.

Kinda reminds me of this thing:

Betcha that'd be a hoot to try out. Might be a bit nose happy though.

 

[badlee]

Out for a walk.

View attachment 1507885384392.jpg

 

[bluemoose]

Very nice, make your own ???

Just started!

 

[Inkleg]

Just started!

Damn good start!!

 

[bluemoose]

View attachment IMG_0412.jpg fresh ingredients.