Question about Taprite multi-regulator

[snarf7]

Found a good deal on one of these on Ebay so I bought it and its on it's way.
Note how the unit has a barb connector at both ends. With this configuration is it possible to feed it 30-40 psi from the tank into one side, set each individual dial as needed for the 4 kegs and then the output on the other end will still pass thru my 30-40 psi? If so, I can force carb a keg while keeping the others at serving temp, I'd just want to install some kind of shutoff on that output side. Am I correct here?

 

[marc1]

Note how the unit has a barb connector at both ends. With this configuration is it possible to feed it 30-40 psi from the tank into one side, set each individual dial as needed for the 4 kegs and then the output on the other end will still pass thru my 30-40 psi? If so, I can force carb a keg while keeping the others at serving temp, I'd just want to install some kind of shutoff o

We need the link to see what you are talking about, I'm not following you.

 

[day_trippr]

Given the "barb at both ends" it sounds like a gang of Taprite secondary regulators. If true the proposed usage would work...

Cheers!

 

[snarf7]

We need the link to see what you are talking about, I'm not following you.

haha, sorry, forgot the image

 

[day_trippr]

And indeed, a gang of secondaries...

Cheers!

 

[snarf7]

And indeed, a gang of secondaries...

Cheers!

Awesome, thanks man! this is going to make my life much better

 

[Konadog]

Exactly how I use mine.