Pressure Ferment sampling hose??

[haeffnkr]

Hi,
What do folks do in regards to a pressure Ferment sample hose?
I Ferment in a modified sanke keg w/ corny posts. I made a 6 foot 1/4" hose - ball lock and picnic valve on each end. The picnic valve just blows foam out no matter what I try.

Anyone figured out a solution? Tiny diameter super long hose and a tiny valve maybe?

thanks haeffnkr

 

[Bobby_M]

3mm ID EVA barrier tubing, about 6 feet. This assembly is 3ft, but you can add another 3ft and I can keep it 6ft total.

https://www.brewhardware.com/product_p/bevhose_bl_pic_microeva_duo.htm
https://www.brewhardware.com/product_p/evabarriertubing3mm3.htm

 

[chordwizard]

Flow control liquid disconnect, hose (of a convenient length), picnic tap.

 

[fluketamer]

i use my picnic tap 2.1 to sample beer when i pressure ferment out of my oxebar 20 l keg and it works fine.

 

[crazyjake19]

Just the basic serving setup - picnic tap on 5ft of 3/16" ID line.

 

[DuncB]

I have some 4mm external with 2mm internal beer line works well. Tend to use this on my mini keg when taking beer away to other venues.
Most of the time I use my picnic tap on 8mm Eva barrier.
This pours foam but I want a degassed sample for hydrometer or refractometer.

 

[Unicorn_Platypus]

i use my picnic tap 2.1 to sample beer when i pressure ferment out of my oxebar 20 l keg and it works fine.

This is what I use too. Its a fantastic little devise and eliminates the need for tubing.

Keep a soda bottle filled with starsan and a carb cap to sanitize between uses.

Takes two seconds to sanitize between uses too