Official 2011 "Pay It Foward" Thread

[Pogopunx82]

I've got 2 1/2 pounds peated malt and 1 oz saaz. Found out I don't like smoked beers too much.

 

[Rob_B]

I've got 2 1/2 pounds peated malt and 1 oz saaz. Found out I don't like smoked beers too much.

Mmmmm smoke...I would love to take that off your hands!

 

[Pogopunx82]

Rob you got it. Pm sent.

 

[kpr121]

I could use the coupler, if it's still available..

Its yours, send me a pm with shipping address.

 

[Regulation]

I know it's not brewing equipment, but I figure there have to be some whiskey drinkers that might have a use for them. I have an extra set of brand new whiskey stones if someone wants them.

Edit: Gone to Regulation

Iffy it's west--- Pms are full.

Can you delete Pms on HBT mobile?

 

[Gregscsu]

I have an extra liquid and gas ball lock disconnect. Both with a 1/4" barb, if anybody wants them.

If these are still available I could use them.

 

[bphelan]

I have a used hoff-stevens coupler laying around that I have no use for, although I'm not sure if anyone has any use for them anymore.

 

[midfielder5]

Dave_Miller book.
1st PM takes it.

FYI, the rules per Yooper are "and send it (for free) to the first person who responds IN THIS THREAD."
** not PMs.
The purpose is to keep track of claimers, as each is only to take one. I see you added who it went out to, so that concern is not present. I just wanted to note this so other posters of goods don't follow suit.
cheers.

 

[Challenger440]

bump

 

[mrgstiffler]

I have 50ft+ Accuflex Bev-Seal:

Accuflex Bev-Seal Ultra Barrier Tubing 3/16" ID - 100ft - FREE SHIPPING - Birdman Brewing Company Store

 

[GTO_Guy]

I would love the line!

 

[mrgstiffler]

I would love the line!

Done.

 

[spazzy]

I have a candy thermometer if anyone wants it... although I think all of us have one of those by now?

I would love a new thermometer that I can leave in while i am steeping (or mashing as I am attempting to start all grain). I have a digital one now and the display fogs up at the sight of any steam

If that style would be good, and its still available. I am in need

 

[two_hearted]

I have an extra bag of rice hulls sitting on my shelf. I know its not much, but someone must want 'em and I don't have much to give. I think its 1 pound.

Gone to Airborneguy!

 

[Airborneguy]

I'll take the hulls if still available! I have a few wheat beers coming up.

 

[two_hearted]

I'll take the hulls if still available! I have a few wheat beers coming up.

You got 'em!

 

[Airborneguy]

My turn. I have 2lbs each of C60 and Rye for whoever wants them.

 

[Apendecto]

My turn. I have 2lbs each of C60 and Rye for whoever wants them.

Count me in.

 

[Airborneguy]

Now that was fast! PM me your address. I'm off monday so I'll ship then.

 

[acefaser]

Ok I have something coming to me so its time I start listing some things.
No ship - Live in Firestone Colorado (by Longmont)
75 quart Coleman Xtreme cooler converted into a mash tun. Includes stainless braid that has a coiled wire inside it to prevent it from collapsing. Valve is also included. I have filed the hollow lid with expanding foam to help keep the heat in. This thing can do 5 to 15 gallon batches and I would typically get 70-74% efficiency with a dual batch sparge. Sorry I won't ship, I live in Firestone Colorado (by Longmont) if you want to set up a pickup.

Edit: Gone to MoPhunk

 

[acefaser]

Another up for grabs-
False bottom for keg. I have cut a 7/8" inch hole in the center so you can use 1/2" pipe for better flow. See the Jaybird version I just upgrade to. THE JAYBIRD VERSION IS NOT FOR PAY IT FORWARD. You get the 11.5" false bottom. Free ship in US

Edit: Gone to bottlebomber

 

[bottlebomber]

Another up for grabs-
False bottom for keg. I have cut a 7/8" inch hole in the center so you can use 1/2" pipe for better flow. See the Jaybird version I just upgrade to. THE JAYBIRD VERSION IS NOT FOR PAY IT FORWARD. You get the 11.5" false bottom. Free ship in US

Yes! I'll take that please!

 

[two_hearted]

I just bought my first false bottom this afternoon! Dang

 

[acefaser]

Yes! I'll take that please!

PM me your addy and I will get it in the mail!

 

[MoPhunk]

Ok I have something coming to me so its time I start listing some things.

75 quart Coleman Xtreme cooler converted into a mash tun. Includes stainless braid that has a coiled wire inside it to prevent it from collapsing. Valve is also included. I have filed the hollow lid with expanding foam to help keep the heat in. This thing can do 5 to 15 gallon batches and I would typically get 70-74% efficiency with a dual batch sparge. Sorry I won't ship, I live in Firestone Colorado (by Longmont) if you want to set up a pickup.

Would you ship if I paid for it?

 

[acefaser]

Would you ship if I paid for it?

This thing is huge. You could probably build one for the price it would be to ship. Where to?

 

[nukinfuts29]

Got my hydrometer today, thanks again!

 

[trigger]

Well, my e-brewery has been up and running for about a year now, so here's what I've got to share:

There's a 30A double pole DIN breaker, 2 120V red indicator lamps, about a dozen DIN terminal blocks with a few 2 block jumpers and a couple big jumpers (I think they're 8 block). There's a few end plates, a few of the end blocks, some wire on the spools, and then the jacketed stuff...

Basically it's a box full of odds and ends to build a control panel. Not enough for a full build, but it's a good place to start. If you know what this stuff is then it's for you, and if not please let someone else have a chance at it.

You can pick it up if you're near Portland, or I can ship.

-EDIT: Gone to runningweird

 

[runningweird]

Well, my e-brewery has been up and running for about a year now, so here's what I've got to share:

There's a 30A double pole DIN breaker, 2 120V red indicator lamps, about a dozen DIN terminal blocks with a few 2 block jumpers and a couple big jumpers (I think they're 8 block). There's a few end plates, a few of the end blocks, some wire on the spools, and then the jacketed stuff...

Basically it's a box full of odds and ends to build a control panel. Not enough for a full build, but it's a good place to start. If you know what this stuff is then it's for you, and if not please let someone else have a chance at it.

You can pick it up if you're near Portland, or I can ship.

I'd love to get your control panel bits and bobs!

 

[MoPhunk]

This thing is huge. You could probably build one for the price it would be to ship. Where to?

Don't worry about it then. I get 75% off of fedex. If you can get me the measurements and weight I can see if its worth it. But if its a hassle don't worry about it. Thanks.