New Brew stand, need burner help

[shawnguinn]

I’m building a new brew stand and have my Bayou BG-14 burners ordered, does anyone have the distance from bolt hole to bolt hole so I can start on the mounting brackets????????
Great place to purchase Bayou 10" high pressure burners cheep ($29.95 each) !!! http://www.agrisupply.com/product.asp?pn=64494&bhcd2=1267484403

 

[Cliff897]

Might be best to wait till yours arrive.
reason: They are cast products and they might have enough variation that you could have issues. Depends of course on the pattern makers and whether they all worked tight.

 

[shawnguinn]

Very cool, ill wait thankyou

 

[Cliff897]

Nice stand.

I'm making mine from lumber. But I'm going electric so I don't have the heat to contend with, I'm thinking I'll use granite tile from the BORG to top it. But I do have a fair bit of left over deep dark purplish Nubian 6" tile that would look nice with black grout.
Cherry raised panel doors and sides, frame construction.......

 

[Bobby_M]

If you skin that thing, you could use it as an earthquake bunker.

 

[shawnguinn]

ur right, I like it

 

[humann_brewing]

watch out for the dogs in the corner, they look scary

 

[Sawdustguy]

I’m building a new brew stand and have my Bayou BG-14 burners ordered, does anyone have the distance from bolt hole to bolt hole so I can start on the mounting brackets????????
Great place to purchase Bayou 10" high pressure burners cheep ($29.95 each) !!! http://www.agrisupply.com/product.asp?pn=64494&bhcd2=1267484403

It looks like part of my fire departments aerial ladder.

 

[PsicloneRN]

Coming along great man.

 

[shawnguinn]

Back bar welded up today~!!!!!

 

[SouthernYankee]

Whats the back bar for? To keep the keggles or other pots from falling off the back of it?

 

[shawnguinn]

Had extra metal and protection from a bump

 

[mczspub]

Im doing a little reasearch to weld up my own brew stand ? do u know what thickness and size of the steel you used?

 

[SouthernYankee]

Im doing a little reasearch to weld up my own brew stand ? do u know what thickness and size of the steel you used?

Not to steal the thread, but im in the process of also doing a stand. I used 1.5 x 1.5 16 gauge, which is more then enough.

https://www.homebrewtalk.com/f51/welding-101-fun-brutus-build-164749/

 

[SouthernYankee]

Had extra metal and protection from a bump

I hear yeah. I too have extra, I might take your design for the rear piece and do something like that.

 

[shawnguinn]

I used .030 steel wall 2x2 tubing, Nice and strong and im able to lift it by myself. I love it!!!!!!!!! I did a ton of research on my own and after talking to alot of people that was the general assumption.

 

[Dave258]

Nice stand! I like the idea of the Back Bar!

 

[mczspub]

sorry for stealing the thread, but where did you guys get the metal for your stands?

 

[SouthernYankee]

sorry for stealing the thread, but where did you guys get the metal for your stands?

I got mine from a guy off of ebay. He sells a lot of the square tubing on there. He just didn't have the size I was looking for. So, I email him asking how much 10 pieces of 60" would be with shipping. Total cost was $94 bucks.

 

[PsicloneRN]

Damn this is turning into one big thread hijack. Start your own thread guys.

 

[SouthernYankee]

To answer the OP question. They are 8" apart. I have two of them and just messured it for the OP.

Didnt want you to think I was Highjacking the Post!

 

[shawnguinn]

I got the metal from a local metal shop in town, I paid around $120 for all my metal

 

[diatonic]

If you need the measurement across the diameter between mounting screws it's 11". 10" burner diameter, and the little mounting posts stick out ½".

 

[shawnguinn]

Thank you so much for that measurement!!!!!

 

[shawnguinn]

weekend work

http://lh3.ggpht.com/_2u4sFbD4HtA/S5NAhPBPO8I/AAAAAAAAAGI/hqYfjQ72WWY/s640/DSC00483.JPG

 

[Snake10]

Cool rig! burner to kettle 4.5"
snake10

 

[Snake10]

Why do guys weld the top of a brutus with the holes in the top? Verticles, I mean? Don't you realize 45's eliminate the need for a stupid cap on the ends? Wake up and smell the coffee!!!!. Brotherhood brew fixed it!
snake10

 

[shawnguinn]

You Live and you learn.

My buddy Jack and my baby Hannah!!!!!

 

[Dave258]

Stands looking nice! Nice bull dog too!

 

[SouthernYankee]

Why do guys weld the top of a brutus with the holes in the top? Verticles, I mean? Don't you realize 45's eliminate the need for a stupid cap on the ends? Wake up and smell the coffee!!!!. Brotherhood brew fixed it!
snake10

Because for some of us its easier to weld together then having to cut 45 degree angles on all the tubing.
I think the stand looks great. Just because he has the end caps doesn't make it an inferior stand!