Kicking around the idea of a 15gal kettle group purchase...

[SpikeBrewing]

**EDIT**

New group purchase starts 3/13/12. Runs until 3/16/12.

(Copied from post 53)

Well we are getting A LOT of requests to do another group purchase of the 15gal kettles and since we're here to serve the people.....

The 15gal kettle will be offered again at the discounted price of $150 (normally $170). The kettle can be ordered with 2 vertical couplers, 2 horizontal couplers or 1 coupler. The lid is included as well as free shipping to the lower 48. The kettle measures 16.5" wide by 17" tall (link to kettle: www.spikebrewing.com/15gal_vertical).

We're placing a large order for kettles this week so there will be a 2 week lead time on getting your kettle but the wait will make it that much better (at least that's what I was told in grade school ).

Email ([email protected]), private message, reply to this thread or call me (262.370.4616) and we'll send out a Paypal invoice for the discounted rate. Cut off for this group sale will be Friday March 16th.

-Ben

 

[BeerWard]

Is that with the ball valve and thermometer? I might be interested

 

[SpikeBrewing]

Is that with the ball valve and thermometer? I might be interested

Just the kettle. So you save $20 off the normal price.

 

[akthor]

Is that the kettle that is taller than it is wider? Similar to a sanke keg?

 

[SpikeBrewing]

Is that the kettle that is taller than it is wider? Similar to a sanke keg?

Correct. It's our kettle that is 17" tall.

 

[Native302]

would this be for two drilled and welded adapters?

 

[suds_zville]

Might be interested.

Buyers choice of vertical or horizontal couplers?

 

[SpikeBrewing]

would this be for two drilled and welded adapters?

Yes this would be for (2) full length 1/2" NPT couplers that have been TIG welded in.

Might be interested.

Buyers choice of vertical or horizontal couplers?

Yes, whatever config you would like with the kettle

 

[jholen]

Wish I had $150 to spend right now... damn house purchase!

 

[Irrenarzt]

What's the diameter of this kettle? Is it triclad? And can we get it without the bungs welded in?

 

[Native302]

I'm in for one

 

[copyright1997]

Interested, especially if you can shave off a bit on one with the optional thermometer and ball valve.

 

[Jem]

how about the 20 gallon?

 

[hyperboarder]

I might be in if you could do a combo with the ball valve and thermometer.

 

[aModestMouse]

Im interested. Could the couplers be arranged different? Just want the top one raised a bit.

 

[malevolent]

I wish I didnt just buy a 10 gallon kettle. Definitely going to pass this off to a friend though.

 

[ghoti]

I would be in for one. Does it come with a lid like the one pictured?

 

[SpikeBrewing]

What's the diameter of this kettle? Is it triclad? And can we get it without the bungs welded in?

The kettle is 16.5" wide by 17" tall and single layered. I can sell without the fittings. PM me.

Interested, especially if you can shave off a bit on one with the optional thermometer and ball valve.

I might be in if you could do a combo with the ball valve and thermometer.

I really can't go lower on the valves and thermos unfortunately

how about the 20 gallon?

Right now we're only looking at offering this for the 15gal

Im interested. Could the couplers be arranged different? Just want the top one raised a bit.

Yes. The top coupler is at 7" from the bottom currently.

I wish I didnt just buy a 10 gallon kettle. Definitely going to pass this off to a friend though.

Thank you!

I would be in for one. Does it come with a lid like the one pictured?

Comes with lid and 2 couplers

 

[aModestMouse]

put me down for one then.

also, how far from the bottom of the kettle is the bottom coupler? thanks!

 

[rhamilton]

Any chance this kettle could qualify for the group buy? I like the shorter stature and the false bottom

 

[CBK]

Your kettles look really nice. Really like the idea of tig welded couplings. Is it possible to take this a step further and add an option for a site glass?

 

[rhamilton]

Also, is this CL posting yours by any chance?

 

[motobrewer]

i would be interested. what's the wall thickness?

 

[FuBaR1218]

Maybe we could squeeze shipping to Canada into this group buy? I'll even pay some extra!!!

 

[richbrew99]

I just got one of those from Ben... Awesome pot and he's cool to do business with. If you can, grab one of these.

 

[Native302]

I'm anxiously awaiting!

 

[SpikeBrewing]

put me down for one then.

also, how far from the bottom of the kettle is the bottom coupler? thanks!

Bottom coupler is about 1.5" from the bottom.

Any chance this kettle could qualify for the group buy? I like the shorter stature and the false bottom

Yes, we can do that!

Your kettles look really nice. Really like the idea of tig welded couplings. Is it possible to take this a step further and add an option for a site glass?

Well we have the kettle with 2 horizontal couplers so one can be used with a ball valve and the other a thermo sight glass combo but we can always have a 3rd coupler welded in.

Also, is this CL posting yours by any chance?

That would be me!

i would be interested. what's the wall thickness?

1mm thick. Very sturdy kettles!

Maybe we could squeeze shipping to Canada into this group buy? I'll even pay some extra!!!

I'm not opposed to shipping to Canada but the quotes I get back are like $100-120 which takes out all my profit margin

 

[arg]

I'm interested...it's a good price even after adding the ball valve, barb fitting and thermometer.

 

[rhamilton]

I'm in for one for sure, possibly two. I'll be watching the thread in case the group buy happens.

 

[aModestMouse]

Bottom coupler is about 1.5" from the bottom.

can this be adjusted as well? my hop blocker is 1.5" tall..