CPlazas
Member
Good news, it really resumed fermenting exactly 2 weeks after putting it into the fermenter. It's been going for a couple of days now. I'll let it sit for a week and take a gravity reading to see if it's around my FG.
I would use it, it is a good yeast, if treated like it should. Mash long and low, or do 60 minutes at 64c.Well I just got a free pack of this with the London ESB packaging.
It's expired in about a month and was added as a gift in an online order.
I'm willing to give it a shot but wondering if I should use it or not - free yeast vs time and money spent on the other ingredients if the beer turns out to be just OK.
I would brew with it during the Christmas holidays so I'll have a look around for a recipe where it was a success before deciding![]()
Is this because of being close to expiration or because of the yeast characteristics?Mash long and low, or do 60 minutes at 64c.
You might want to include some simple sugars and you should also keep the og at or below 1.045.
Yeast characteristicsIs this because of being close to expiration or because of the yeast characteristics?
Exactly!Yeast characteristics
Burton Ale has POF flavors.
Yes, WLP023. Hmmmm, does not seem like sulfur. Maybe my sanitation is at issue? Will have to try this again.WLP023? Are you sure?
It is notorious for throwing quite a lot of sulphur, which may be what you're getting?
Sounds good!Is there any liquid yeast that this is similar to, at least flavourwise or is it quite unique?
Considering some recipes to try so would be useful to know so I can do a search.
Maybe something like Timothy Taylor landlord with a bit of sugar/syrup to replace some of the base malt.
Edited to add a possible recipe:
Batch size: 5 gal
OG: 1.043
Est. FG: 1.013
IBU: 30 (EBU) Brewhouse Efficiency: 70%
- 82.8% Golden Promise
- 3.40% UK Extra Dark Crystal 120°L
- 13.8% Cane Sugar
- Fuggles, 0.75 oz. of 4.5% AA pellets @ 60 min (15.5 IBU)
- EKG, 0.75 oz. of 5.0% AA pellets @ 45 min (8.6 IBU)
- Styrian Golding, 1 oz. of 5.5% AA pellets @ 5 min (5.0 IBU)
Sounds good!
If you are in the UK, try replacing the sugar with Lyle's Golden Syrup, for the little extra Britishness![]()
Hmmm... Dann wird's schwer!I'm actually in Germany but can maybe get lyles in the supermarket in the Netherlands.
However I have a bottle of the stuff below waiting to be used for brewing for a few years.
I know some people who have use it successfully for Belgian beers.
https://www.hollandforyou.com/produ...-gilse-schenkstroop-classic-holland-shop.html
Sounds good!
If you are in the UK, try replacing the sugar with Lyle's Golden Syrup, for the little extra Britishness![]()
The dark one is not comparable to any of the darker invert sugars, so I wouldn't recommend it, if you're not after that particular flavour it provides.You can get Lyle’s on Amazon. Light & Dark.
I pitched this into a wheat stout yesterday. Cloudy won't matter. Going to try to keep it at about 65F. Added the sugar to try to get the final gravity lower.
Every time I use a lot of wheat I get crazy good efficiency. BrewTarget says this is about 85%.
BIAB, 3.5 gallons, 1.057 O. G.
2.5 lbs. White wheat malt
1.75 lbs. Pale malt
1 pound white sugar
7 oz. Roast barley
3 oz. Chocolate malt
1.5 oz. East Kent Goldings (4%AA) 60 minutes
Mashed at 148F for 60 minutes.
This recipe looks great. Enjoy.
I like simple. I've done the ten malts five hops thing. There is a beauty in simplicity plus, it's easier.
I'll post what my results are.
I agree with some other posts. This would make a great yeast for a nice mild where you want the low abv but still ha e some sweetness and maltiness.
Did you post on the wrong thread? I don’t think many have called this a beast, most say it needs pampering just to get it to fully attenuate!For something that is supposed to be such a beast I'm underwhelmed. I've got this at 63F, it's got maybe an inch of krausen. This is 48 hours after pitching. I honestly started to put a blow off tube on this instead of an airlock as it's 3.5 gallons in a five gallon bucket. Lid seals tight so it isn't leaking.
Did you post on the wrong thread? I don’t think many have called this a beast, most say it needs pampering just to get it to fully attenuate!