ASassyBeerChick83
Well-Known Member
- Joined
- Jun 10, 2012
- Messages
- 323
- Reaction score
- 11
Salutations!
Last night, the hubby & I brewed our - yes! - 2nd brew!! We are pretty excited!! The hubby really wanted to go for a Belgian & something perhaps a bit more challenging than our Munton's Bock Brew Kit! Although entertaining, we both knew we could handle something a little more intense the second go around! However, I think we might be doing a couple of extracts & partial mashes before moving into the AG.
Okay. So, some of you peeps have seen the recipe we used, but for those folks who haven't, let me review the recipe with you!
Style: Belgian Triple
Sugars:
Amount Type
8 lbs. Light Malt Extract
1 lb. Light Belgian Candi Sugar
3/4 cup Corn Sugar (priming)
Grains:
Amount Type
2 lb. Pilsner Malt
1/2 lb. Carmel-Pils Malt
Hops:
Amount Type
1 oz. German Tradition
1 oz. Fuggles (flavoring)
1/2 oz. Czech Saaz (finishing)
Yeast: Safbrew T-58 Dry Brewing Yeast
Starting Gravity: 1.074
Ending Gravity: 1.016
Directions: Make any water adjustments first. It is best boil as much (up to 5 gallons) as your brew-pot will hold. Be careful not to overfill or cover your brew-pot when boiling, this will cause a boil over.
The use of a grain baf is highly recommended,. Place grains in grain bag, and put into 160 degree water. Cover, turn fire off, let steep for 30 minutes. Remove grain bag and bring water to a boil. Turn off the heat (to prevent scorching), and mix in the malt extracts and any other adjuncts. When fully dissolved, turn the heat back on and return the wort to a rolling boil. Add the bittering hops, continue to boil for 50 minutes. Add the flavoring hops, continue to boil for 5 minutes. Add the finishing hops and continue to boil for 5 more minutes. The use of hop socks makes the addition and removal of hops much easier.
After you have boiled your wort for a full 60 minutes, remove all hops and add water to reach 5 gallons. Cool to 75 degrees and add yeast. Shale your fermenter vigorously for 5 minutes to aerate the wort. Remember, your yeast needs oxygen to live and grow. Attach the blow-off hose to the fermenter and place the end into a container of water to form an air-lock. Rack into secondary fermenter after kreusen has begun to subside.
Starting with the Ingredients first!
Our Grains.
Our Hops.
Our Extract.
The Sugar.
The Yeast.
Ready to get this Brew Going!!
Well, yesterday was brew day!
I have an update coming soon!!
Stay on the lookout!!
I promise! You won't be disappointed!!
We weren't!!
Peace. Love. & Beer.
CHEERS!
Last night, the hubby & I brewed our - yes! - 2nd brew!! We are pretty excited!! The hubby really wanted to go for a Belgian & something perhaps a bit more challenging than our Munton's Bock Brew Kit! Although entertaining, we both knew we could handle something a little more intense the second go around! However, I think we might be doing a couple of extracts & partial mashes before moving into the AG.
Okay. So, some of you peeps have seen the recipe we used, but for those folks who haven't, let me review the recipe with you!
Style: Belgian Triple
Sugars:
Amount Type
8 lbs. Light Malt Extract
1 lb. Light Belgian Candi Sugar
3/4 cup Corn Sugar (priming)
Grains:
Amount Type
2 lb. Pilsner Malt
1/2 lb. Carmel-Pils Malt
Hops:
Amount Type
1 oz. German Tradition
1 oz. Fuggles (flavoring)
1/2 oz. Czech Saaz (finishing)
Yeast: Safbrew T-58 Dry Brewing Yeast
Starting Gravity: 1.074
Ending Gravity: 1.016
Directions: Make any water adjustments first. It is best boil as much (up to 5 gallons) as your brew-pot will hold. Be careful not to overfill or cover your brew-pot when boiling, this will cause a boil over.
The use of a grain baf is highly recommended,. Place grains in grain bag, and put into 160 degree water. Cover, turn fire off, let steep for 30 minutes. Remove grain bag and bring water to a boil. Turn off the heat (to prevent scorching), and mix in the malt extracts and any other adjuncts. When fully dissolved, turn the heat back on and return the wort to a rolling boil. Add the bittering hops, continue to boil for 50 minutes. Add the flavoring hops, continue to boil for 5 minutes. Add the finishing hops and continue to boil for 5 more minutes. The use of hop socks makes the addition and removal of hops much easier.
After you have boiled your wort for a full 60 minutes, remove all hops and add water to reach 5 gallons. Cool to 75 degrees and add yeast. Shale your fermenter vigorously for 5 minutes to aerate the wort. Remember, your yeast needs oxygen to live and grow. Attach the blow-off hose to the fermenter and place the end into a container of water to form an air-lock. Rack into secondary fermenter after kreusen has begun to subside.
Starting with the Ingredients first!
Our Grains.
Our Hops.
Our Extract.
The Sugar.
The Yeast.
Ready to get this Brew Going!!
Well, yesterday was brew day!
I have an update coming soon!!
Stay on the lookout!!
I promise! You won't be disappointed!!
We weren't!!
Peace. Love. & Beer.
CHEERS!