Hello all. First post after some time away!
I'm considering using a corny keg for primary, looking for guidance and answers to some questions
I'm considering using a corny keg for primary, looking for guidance and answers to some questions
- In general, are there an downsides?
- With a five gallon corny, is there any headspace above the five gallon level? (I typically do five gallon batches)
- Woud probably use a quick connect to attach a blowoff tube to the gas-in fitting. Is there a better approach for handling blowoff?
- Can priming sugar be added to a corny, and bottles filled straight from the keg?
- Is there anything to keep in mind regarding forced transfers with CO2?
- Rather than shorten the out tube, has anybody used the Clear Beer Draught System? If so, how did it work out? https://www.shop.clearbeerdraughtsystem.com/main.sc
- How difficult is it to clean/disinfect the keg and fittings between batches?
- What's the height of a corny, from the base up to top of the rubber collar? (needs to fit in my chest freezer)
- Is there anythig else I shoud be asking?
Last edited: