purplehaze
Well-Known Member
- Joined
- Mar 2, 2011
- Messages
- 398
- Reaction score
- 27
I started a third keezer for a friend of mine. Trying to keep the cost down as much as possible using lots of used parts. The freezer was sitting for five years with about three inches of water in it so it was cheap. It was covered with all kinds of nasty spills and mold that took some elbow grease and bleach but it cleaned up nicely.
The base was built out of mostly re purposed wood.
I will have to lighten the lid by cutting out some portions of the 2x4's, its way too heavy without the coffin. The freezer lid was very flimsy so I stiffened it up with some wood and insulated it.
I will again be carving a backs plash with a different design and changing the way beer the lines are passively cooled but basically this keezer will be similar to my brothers.
Here is a pic of the carving I will be attempting.
The base was built out of mostly re purposed wood.
I will have to lighten the lid by cutting out some portions of the 2x4's, its way too heavy without the coffin. The freezer lid was very flimsy so I stiffened it up with some wood and insulated it.
I will again be carving a backs plash with a different design and changing the way beer the lines are passively cooled but basically this keezer will be similar to my brothers.
Here is a pic of the carving I will be attempting.