paypal sent
My Pearl is for some Heady Topper experimentation. The MO is for research for beer needed at a September beerfest (English theme) (will be buying more MO in June/July, no doubt!), and my regular GW 2-row is to slam down some great APA/IPA recipes. It's taken me a good 6 years, but I'm totally hop obsessed right now.
Mind sharing the plans for your DIY keg washer?
They've changed it, at least on the mobile version its 'personal' and will include a fee on top. Purchase they charge the vendor. Just don't 'gift'OK- I gotta ask, again.
I just wanna be clear how to send via paypal where I incur the fee? Is it a purchase or personal?
Thanks,
Dbals
Been following a couple threads, I'm intrigued and willing to share some experimentation notes..I see that BYO March might shed some light if patient.. No Conan yeast but 007 is Bond like
Did you order enough grain this time?
Mind sharing the plans for your DIY keg washer?
I made mine using a 1/2 hp sump pump I had. Usually always keep a new spare pump on hand since the old ones always fail when stores are closed. I used 1/2" PVC stand pipe so carboy can slip over the pipe sticking upward. Also have a "T" at the base with two hoses hooked up with keg disconnects. This allows BPW solution to clean pickup tube on korny kegs. I use a plastic tote tube and a milk crate for the pedestal. The milk crate is sitting on its side with the Sump pump inside it and the PVC pipe sticking up through the top. The keg or carboy can rest upside down and drain back into the tote very quickly without spilling on floor. This setup kicks butt.
I went to the general info tab on the spreadsheet and all i can find is a link to the country malt sheet, pick up adress, pick up dates, and then under paypal info it says nothing more than do not send as a gift. I can not figure out how to get your info.
Also i have seen people paying through chase, that is my prefered method, also can not seem to find any info on going through with that.
send the chase or paypal method to my email address.
sorry for being so ignorant to this but for chase quick pay I should just use your email address as your name? I just want to make sure before i send
bmason1623 said:maybe others can answer this. others...?
mind posting a pic?
Mind posting a pic?
I forgot to add some rice hulls! Anyone looking to offload some?
Yes. I have some that I will never use since I have my mill gapped just right so no more stuck sparges.
I was going to pick up a feeler gauge to test my barley crusher with milling wheat. What do you currently have your set to? I have it set at the factory setting and never messed with it. I did, as a matter of chance, clean it out last night for the first time. I may have to do that more often as I found some nasty stuff around the edges of the grinding wheels.
Assuming the spreadsheet is current looks like we are about 2/3rd collected?
So far that may be the fastest payment if we continue this trend...
There are always stragglers that slow the process down but, yes, we are off to a great start.
I'll post a picture this evening when I get home from work.
Enter your email address to join: