Search results

Both kegs have the same volume of beer. Both were carbed off of the same tank with a T fitting. 30 psi for one day, then both were at 12 for 4.5 days now. They both are the same recipe, but brewed back to back, both really hoppy ipa's. I only took about a 1/3 of a glass sample of each, the...

The circle of beer. From keg, back to keg. Located at the Elevator 13th floor taproom, not the restaurant, only open on Saturdays.

Apparently if you were a Florida fan your homer color commentary announcer was on TNT, and as a Connecticut fan your announcer was on TruTV, A Kentucky fan, your homer was on TNT, and if a Wisconsin fan, you should have watched Tru Tv. Not knowing this, and rooting for Wisconsin, I watched the...

The price may seem high, but these are hard to find. This keg use to be an emergency eye wash station. It had a faucet on the out post and a air charging chuck on the in post. Because of this, I purchased brand new ball lock post for the in and out. Of course because they are new, they also...

1" triclover ferrules measure 1.98" across. I have a quantity of 12 1" triclover hose barbs, that fit a 1" diameter hose. I also have two 90deg. butt weld fittings, they have a triclover ferrule on one end, and just a straight 1" on the other end. These are great for welding into kegs,, etc...

16 gallon - about 12 inches around and stand over 3 foot tall or so. They have dip tubes, but no disconnects. Oval lids do not have pressure relief valves. There are two extra ports that are 1/8" pipe thread, that would have to be plugged. Threads on top appear to be same thread as standard...

Did my first back to back batches in one day. The temperature was 92. I went at it slowly because I was brewing on blacktop. With prep cleanup, brewing all times 2, it was over a 10 hour day. First observations was that the strike water did not have to be as hot, and because the ground water...

For those of you that have made the Dry Dock brewing recipe, after three days of active fermentation, do you rack on top of the apricot puree, or just pour it in? I bought the puree and the grain, but I am not sure of this step. It would be easier to just dump it in. But would you stir it and...

Just finished this hop basket and will put it to use this weekend. It is made out of perforated 304 sheet. It is 8 inches in diameter and about 16.5" tall. The bottom is solid and has a 1" ring on the bottom. I'm thinking hop pellets will settle down in the bottom. I know the mesh will work...

I have two 5 gallon tall sankey kegs that I would like to trade for one 2.5gallon or one 3 gallon ball lock keg.

I thought that a RIMS system would yield higher efficiencies, but my first two attempts with my new system have been low of the OG. 5 points on the first brew and around 3 or 4 on the second. Not bad, but I wondered if there are any techniques guys use on a RIMS system to get their efficiency...

After taking two years to build my all electric, all triclover, single tier, I put it to the test today. The biggest concerns were with coming up with the correct strike temp to hit the mash temp. Well, I could not be happier. I only missed the mash temp by one degee. I remembered from doing...

Because tri clover valves hook onto tri clover ferrules, it is more difficult to mount a dip tube because there are no interior threads inside the keg or kettle. When using a 1/2" or 3/4" tri clover ferrule, you can use a 1/2" or 3/4" swagelock coupler to the dip tube, however, they do not come...

I know a place that has 55 gal. closed head stainless drums for sale for $55. He has quite a few, many have small dents, but I'm sure most will push out from the inside. He has a bunch so you might find some that have no dents. They are all stacked inside a storage shipping crate. They held...

Got the electric ran and have done some prelimary tests. Need to work out a couple things, and paint the stand, other than that, it is finally finished.. Started the project almost two years ago. The pumps are 90 volt DC and have variable speed. It is a BCS 460 setup with rims...

Let me preface this by saying this breaker was purchased off of Ebay from PLC center used. After doing all the wiring yesterday, the breaker would not reset so that the visitrip indicator (red flag in window) would always show a blown breaker condition. With the breaker out of the panel it...

I have a 1.5" triclover heat exchanger. It measures 36" long and has a 1.5" tri clover tube going through a 3" outer shell. This gives a half inch jacket around the inner tube. The jacket has 1/2' female pipe thread inlet and outlet that are offset 180 degrees. This could make a cool rims...

3/4" ladish-triclover valve with 8 teflon high temp gaskets. The valve was purchased surplus, but appears to be new. It did not come with a handle, so the handle is used. The valve was actuated, so it does not have a stop in the on or off position, the handle will turn 360 degrees. Inline...

Anybody know where to get one? I have found 3500 watt but no 3000. I wanted this size for a RIMS tube.

I have 10 double pin, (probably imported) and used tri clover clamps to fit 1" and 1.5" fittings. price is $25 shipped. I also have 15 tri clover clamps to fit 1/2" and 3/4" fittings for $30 shipped. These are still in the blister wrap, Waukesha brand. Paypal accepted. P.M. me please.