What came in the mail for you today?

[Hoppy2bmerry]

I love this bucket too ! I make more 3 gallon batches than 5 so it sees more action in the last 2 years than my 2 7 gallon Chapman's. Great little SS bucket that could !!!

Thanks for validating my purchase! I have a plastic bucket that size, just knowing it will need replacement some day, I’ve been looking for one at a reasonable price point without success, so when this went on sale I decided it was the right time.

Three of these 12 BOC arrived yesterday. Thanks Sean!

 

[seatazzz]

New grain mill arrived today, the Mighty Mill 3-roller from Morebeer. After an hour and a bit of assembly, including a lot of cussing and 'where the **** did that nut go this time', milled grain for an impromptu BIAB Wit tomorrow. Looking forward to it!

 

[JAReeves]

12BOC2022

 

[SlobberinDog]

The new 65L gen 4 Brewzilla arrived yesterday with its insulating jacket, an extension collar (I hate boilovers) and a new pulley system. Will post pics tonight once I get her out to the shop and start running some PBW through it. Makes the 35L look tiny sitting side by side lmao

 

[SlobberinDog]

A dozen new glasses because I keep breaking my old ones . Breaking them in with some homebrewed Irish red. View attachment 807047View attachment 807048

Those look great! I work out of Greeley! We should meet up and have a brew!

 

[JCasey1992]

Those look great! I work out of Greeley! We should meet up and have a brew!

Thanks! It's funny. I moved here for college back in 2010 and hated it so much I couldn't wait to get out but since then, it has grown on me where I actually quite enjoy it here. I joke around with my beer friends that Weldwerks is reason enough to stick around!

 

[SlobberinDog]

Thanks! It's funny. I moved here for college back in 2010 and hated it so much I couldn't wait to get out but since then, it has grown on me where I actually quite enjoy it here. I joke around with my beer friends that Weldwerks is reason enough to stick around!

Amen to that!!! Weldwerks is on point for sure!

 

[Hoppy2bmerry]

I’m looking forward to tasting this one, as I’ve brewed it in the past.

Yummy!

 

[Section1]

Not exactly in the mail but I was standing by the mailbox. A friend of mine made these coasters for me. I love them. Came out great!

 

[Hoppy2bmerry]

12 BOC @ my door.

 

[VikeMan]

New toy for Czech style side pulls.

 

[Broothru]

New toy for Czech style side pulls.

SAE or metric threads. I think I need one, Santa.

 

[VikeMan]

SAE or metric threads. I think I need one, Santa.

This one is from Micromatic, and interfaces with a standard US shank. Micromatic calls it a Swing Lever Faucet. (The ones from Lukr need adapters.)

https://www.micromatic.com/content-522273.html

 

[Broothru]

This one is from Micromatic, and interfaces with a standard US shank. Micromatic calls it a Swing Lever Faucet. (The ones from Lukr need adapters.)

https://www.micromatic.com/content-522273.html

Santa said, “Too pricey for Bad Boys, but if you’re VERY good you can put it on a Birthday list.”

He, he. I already know what toys Santa is bringing this year, so I guess I can wait.

 

[seanjwalker1]

New toy for Czech style side pulls.

Looks wonderful !!!! How's it work ? . Looks like something Boba Fett dropped...

 

[VikeMan]

Looks wonderful !!!! How's it work ? . Looks like something Boba Fett dropped...

I'll be able to try it out in a couple weeks with an Altbier I'll be kegging soon. It's a "side pull" faucet for Czech type pours. Basically, they can make a Czech style pour with a creamy head (Hladinka style), or a whole mug full of foam (Mlíko style) if desired, or anything in between, depending on how far open you pull the lever (and when), and whether you dip the end of the faucet below the surface of the beer (and when). That's my poor explanation of it, anyway. I haven't actually used one before, but I have seen them in action (and enjoyed the results).

 

[seanjwalker1]

I'll be able to try it out in a couple weeks with an Altbier I'll be kegging soon. It's a "side pull" faucet for Czech type pours. Basically, they can make a Czech style pour with a creamy head (Hladinka style), or a whole mug full of foam (Mlíko style) if desired, or anything in between, depending on how far open you pull the lever (and when), and whether you dip the end of the faucet below the surface of the beer (and when). That's my poor explanation of it, anyway. I haven't actually used one before, but I have seen them in action (and enjoyed the results).

Sounds like a winner ! Czech is one of my fave styles. But I'll just have to make it along some how with my run of the mill Perlick foam controls . Some of us can't afford Starwars type advanced gear !!!

 

[Hoppy2bmerry]

In yesterday’s mail.

 

[BrewZer]

Not in the mail, but by virtue of a recent birthday, my lovely 'sposa got me a refractometer! And she doesn't even drink the beer! How cool is that???

 

[T Murph]

Santa came early and brought me 50 lbs 2 row pale malt, 10 lbs of specialty grains, another 1.5 gal Torpedo Keg, a Brew Built HTL controller and a Brew Built Boil controller Friday.

 

[JAReeves]

Stepmom drove in thru NM and brought a case of random pints from Bow & Arrrow Brewing Co. it’s already the merriest of Christmases!

 

[Hoppy2bmerry]

Another selection for 12 BOC.

 

[seatazzz]

A nice little box from brewhardware containing eight new liquid posts for the kegs (way past time) and four new black disconnects; the cheapie ones I keep getting from allmymoneyzgone fail too fast. Tomorrow get to switch out the liquid posts on all the kegs but one, including the ones currently in use; after degassing them completely, that is. I'm not worried about oxidation, beer goes too fast in this house. The one that does NOT get a new post is the bastard stepchild of the family; a Firestone when all the others are Cornelius, making the post thread sizes different. Hoping my LHBS has one that fits when I go there for after xmas sales next week.

 

[Chorgey]

My Uncle and Aunt from Mattapoisett, MA sent me this awesome book!

 

[cfrazier77]

Not today but not long ago, should never have to replace it.

 

[JAReeves]

View attachment 808414


My Uncle and Aunt from Mattapoisett, MA sent me this awesome book!

This book was inspirational for changing my brewing process here in dry ‘ole Los Angeleez.

 

[Knightshade]

Figured I’d try this ascorbic acid thing since I’m doing a DDH pale ale at the moment. Missed adding it during the mash but I’ll add during the second dry hop??

Not sure when the heck I’m actually going to be running out of scotch tape though.

 

[govner1]

Not in the mail but as my info says I’m a kept man and tonight for my 75th birthday my “keeper” gave me a blank check for my new electric brewing system!
Goodbye 3 vessel gas and hello Brewtools B80 Pro!

 

[WestMichiganSteelheader]

After 5 years of brewing I finally purchased a grain mill. Should have done this many years ago. I was like a little kid in a candy store when I saw UPS pull up today. Just waiting for a fermenter to become available so I can put it to use.

 

[grampamark]

After 5 years of brewing I finally purchased a grain mill. Should have done this many years ago. I was like a little kid in a candy store when I saw UPS pull up today. Just waiting for a fermenter to become available so I can put it to use. View attachment 809527

Nice. I’ve had a Cereal Killer for about 5 years and have put 1000+lbs through it with no real issues. You’re going to like it.