Trying to find a ThermoWell for a Grainfather connect controller

[Shermwormbrew]

I have a grainfather connect brain but since I don’t have the full grainfather rig I dangle the probe into my mash. The probe seems to be pretty large but I was wondering if anyone knows a link to a weldless thermo well that would actually fit the GFC probe. The replacement GFC temperature probe well thing is crazy expensive. Just trying to find a weldless thermowell for it.

 

[deuc224]

Ok, what are you looking for and what do you have? Do you have a grain father conical fermenter or a grain father glycol chiller?

 

[Shermwormbrew]

I have the grain father connect controller. For the all in on brew system. I put an element in a old kettle to use as a hot liquor tank. I have the grain father connect controller that powers it. I dangle the probe under the lid into the water but I would like to make it more legit with an actual thermo well. The grainfather thermo replacement is crazy expensive.

 

[Shermwormbrew]

Ok, what are you looking for and what do you have? Do you have a grain father conical fermenter or a grain father glycol chiller?

 

[user 294137]

@Shermwormbrew Did you ever find a fitting thermowell replacement? I'm thinking about buying the controller so I could mod my existing, cheap brewing system but local sellers don't have those sensor covers in stock.

 

[Meza]

@Shermwormbrew @KirgerBung Did either of you get a solution please?

I too have a Grainfather connect controller I'm trying to retrofit to my Guten / Brew Devil all-in-one system.

Looking for either

A) a thermowell that will work with the GF temp probe
or
B) A replacement sensor, compatible with GF Connect, that can screw into the base of the Guten kettle replacing the existing temp sensor.

 

[jschein]

It’s just a standard short thermowell, nothing special

 

[Meza]

It’s just a standard short thermowell, nothing special

Thanks

How does the probe stay in there? Excuse the ignorance I've not used a thermowell before!

 

[jschein]

It will just sit in the thermowell, just like the Grainfather

 

[Shermwormbrew]

More beer now has the part. I’m going to go to Morebeer in a couple weeks to see exactly what it is they have and I will post in here. Also the probe itself seems really thick compared to other probes I have so I think it isn’t just nothing special but I guess thanks??? Haha.

Here’s the link for the Morebeer part.

https://www.morebeer.com/products/g...ARy0Q_NsbBZ9v8OsVXRRzeD7laZVgnBYaApVFEALw_wcB

 

[Shermwormbrew]

And they didn’t have it available when I went.

 

[Tom Foolery]

https://www.stainlessbrewing.com/16-Stainless-Thermowell_p_341.html

 

[Shermwormbrew]

https://www.stainlessbrewing.com/16-Stainless-Thermowell_p_341.html

Thanks but I’m looking for a weldless option for a mash tun. I have bung thermowells for fermentation already.

 

[ihavenonickname]

@Shermwormbrew

ever figure something out for this? I want to use an old grainfather controller to heat my HLT. The temp probe on it is a little weird because it’s short and fat and has the rubber wire part of it getting in the way from going deeper into a thermowell. So the grainfather product seems like the best fit of course, but the listings for it don’t even show it comes with hardware or a backing to tighten it down over a hole in my pot. Ever figure something out? I don’t like just dipping it down into the liquid, too janky.