Thrifty RIMS canister from Nor Cal Brewing Solutions

[Jaybird]

So I got a request here from a member to put together the least expensive RIMS canister I could come up with. We build this. Its JUST the canister at this point but will be updating the thread as more parts are available.

This will come in under $50

Its 16" long overall, 2" TC on one side for your element adapter (We are puting together a VERY inexpensive solution for that as well). I think once all is said and done with element we should be under $100 to get it all put together.

Shoot me a PM if you want to get a canister on order. I will put you on my list. We are building these in our fab shop in CA.

Cheers
Jay

 

[Craw3773]

$100 for a RIMS tube? I'm in. Let me know when you get it figured out.

 

[JDXX1971]

Yep, Jaybird that is pretty sweet. Do you have a way to make a clamp mount for it? I could definitely see this bolted to my new BIAB stand!!
Here is a thrifty controller I thought might work. http://www.auberins.com/index.php?main_page=product_info&cPath=8&products_id=471
It's even on sale right now. I have no idea if it would work for a RIMS system or brewing purposes at all. But if it would that would bring the whole thing in under $200.00!!

 

[woo_pig]

What the diameter of the tube itself.

 

[Weezy]

That's lovely.

 

[Jaybird]

What the diameter of the tube itself.

It's 2" Diameter tubing, 2" TC and 1/2" NPT threaded half couplings.

Cheers
Jay

 

[lazzlo]

This looks great! Put me on the list when you get it ready.

 

[Jaybird]

This looks great! Put me on the list when you get it ready.

You got it! I will be updating this thread from time to time as well. So stay tuned.

Cheers
Jay

 

[woo_pig]

I would like the whole setup.

 

[Jaybird]

I am bringing in the element to do some testing with. Should be here Monday-Tuesday.

https://www.morebeer.com/products/2200-watt-stainless-steel-heating-element.html

This is the element. But, just like everything w sell we will absolutely give you guys ALL THE OPTIONS you want.

Cheers
Jay

 

[BBBF]

I already have a RIMs, but I wanted to tell you that looks sweet. One suggestion, weld a tee on top instead so that a temp probe can be attached.

 

[Jaybird]

I already have a RIMs, but I wanted to tell you that looks sweet. One suggestion, weld a tee on top instead so that a temp probe can be attached.

Great idea. We were going to do a TEE but went with the 1/2 coupling 1 for ease of fabricating and cost (Trying to make it as thrifty as possible) and 2 so you can attach a TEE or any hardware you want directly out of it.

Maybe I will make it an "option"

Cheers
Jay

 

[Jwin]

Damn. Just got my brewhardware rims in the mail yesterday.
Have to ask, why 2 inch instead of 1.5?

 

[Jaybird]

Damn. Just got my brewhardware rims in the mail yesterday.
Have to ask, why 2 inch instead of 1.5?

If you want to use a little larger element, or flow a little faster and not have to worry about the element hitting the sides of the canister. I have a feeling we can do the 1.5" with the element were planning on using but I wanted to make it universal. Honestly the cost is in the labor not the material so really why not.....

Cheers
Jay

 

[user 204491]

Subscribed. Really interested in what the final product comes out to be as I'm in the process of putting a RIMS together and was looking at the Brew Hardware RIMS 12" kit.

 

[Jaybird]

I got the elements in today. Doing to do a few water tests and see just how this will go together. I was hoping the element would thread into a stock part but its not looking that way.

More to come!

Cheers
Jay

 

[JDXX1971]

I was wondering about that myself when I was looking at that element. Figured that it was going to be a weirdo thread size though.

 

[Jaybird]

Coming together!

I am a bit disappointed that the element is not standard threads. But we can work with it.

Cheers
Jay

 

[JDXX1971]

Just grind the treads out of the way on the TC fitting maybe? Then use the nut to tighten it down, that is what I was thinking anyway.

 

[Jaybird]

http://www.auberins.com/index.php?main_page=product_info&cPath=8&products_id=471

Just got a few of these on the way. Going to play with the off the shelf SIMPLE controller first and see how well it controls.

I have to thank @JDXX1971 for the link and the idea of putting together a, as he calls it CHEAPO RIMS...LOL

Your now in the loop brother!

Cheers
Jay

 

[JDXX1971]

Sweet Jay, I like your name (THRIFTY RIMS) better though.

Yep, I want one whole system if it all works out please.

Then we will talk about royalties

 

[Jaybird]

Sweet Jay, I like your name (THRIFTY RIMS) better though.

Yep, I want one whole system if it all works out please.

Then we will talk about royalties

Royalties? Ohhh that's the crown I have to send you because your Royal? No problem....Baahhhaaaaaaaa

Do you like Crown and Coke? LOL

Cheers
Jay

 

[JDXX1971]

Royalties? Ohhh that's the crown I have to send you because your Royal? No problem....Baahhhaaaaaaaa

Do you like Crown and Coke? LOL

Cheers
Jay

Royal pain is the butt is more like it.

Seriously though looks like this brainchild of ours might just work. Thanks for taking the time to work on a project for us CHEAPO'S.

 

[TallDan]

Great idea. We were going to do a TEE but went with the 1/2 coupling 1 for ease of fabricating and cost (Trying to make it as thrifty as possible) and 2 so you can attach a TEE or any hardware you want directly out of it.

Maybe I will make it an "option"

Cheers
Jay

A male NPT output would make the TEE option much easier. Does that fit the thrifty model?

 

[Jaybird]

A male NPT output would make the TEE option much easier. Does that fit the thrifty model?

Why yes it does Dan.... Yes it does! I think you might be onto something there!

Cheers
Jay

 

[Yesfan]

Would that enclosure, the More Beer element, and the Auber temp controller be all that's needed to go to a RIMS system? That's under $150!

Are you looking to maybe sell a RIMS system based on the enclosure as asked earlier in this thread? I may be in if so. How hard would it be to bolt the tube to my Top Tier?

 

[Jaybird]

Would that enclosure, the More Beer element, and the Auber temp controller be all that's needed to go to a RIMS system? That's under $150!

Are you looking to maybe sell a RIMS system based on the enclosure as asked earlier in this thread? I may be in if so. How hard would it be to bolt the tube to my Top Tier?

I just got the elements in yesterday. Auber is on order as of yesterday as well. Other than the obvious of needing a pump, ball valve Thermowell and a few little hardware parts and pieces, yeah. I think you will be closer to $175- $200 after all is said and done but its coming along nicely as a "thrifty" solution to RIMS.

I want to test the Auber myself before I personally say it will work.
The element from B3 doesn't come with a plug. It comes with an adapter plug so you will also need to buy a plug but those are like $10 and I think we will be getting some to be able to offer them so you don't have to order one form like Walmart or Target.

I don't see any reason why you wouldn't be able to bolt this to your Top Tier. Drill a hole and bolt it on.

Cheers
Jay

 

[Schreiner]

Hmmm... interesting!

 

[Jaybird]

Finally was able to get the caps drilled for this ODD BALL sized element. I LOVE THIS ELEMENT! It is amazing at first glance! Solid and looks amazingly easy to clean! If it works 1/2 as good as it looks I'M SOLD! I received the controller and was bale to get it all put together tonight. Tomorrow I will water test and test the PID. I seriously think we are going to be able to get this out the door with element AND controller for under $250 with ball valve, connections AND thermowell!

Just keeping you guys in the loop! I MIGHT go full production with the 1.5" NOT the 2" for a couple reasons, cost being a HUGE factor. But if we can make this more efficient using the 1.5 its a bonus all around! I want to be able to create something for you guys that truly is "THRIFTY" and I think we are getting REAL CLOSE!

And of course everything will be an option. You dont want the ball valve? remove it! no controller? remove it! you get the idea! I LOVE options and I know you guys do as well!


Cheers
Jay

 

[JDXX1971]

Looks almost exactly how I imagined it, very nice!!!!!! Pretty sure I need you to send me this if it works good. I am going to back burner my (other) idea for now.

I fully expect my Crown N Coke if this thing works out too.:rockin: