• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

So who's brewing this weekend?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks!
Thank you as well :mug:
That's all my engineering OCD - my dad's chromosomes no doubt.

Anyway, we're fortunate that the Weldwerks folks pretty much put out a class on this particular beer.
https://beerandbrewing.com/weldwerks-brewing-co-juicy-bits-new-england-style-ipa/

I did make a base malt change to 50/50 Golden Promise and Weyermann pilsner, dropped the dextrin malt, and upped the voltage to a 1.075 OG. I end up with a bigger, paler beer (by a couple SRM points) that's a bit lighter on the palette if not on paper...

Cheers!
 
Brewed an APA with my 3 year old son and then made some dog treats with the spent grain. Was a fun day with the boy!
IMG_20191207_113737438.jpeg
IMG_20191207_153711544_BURST000_COVER_TOP.jpeg
Screenshot_20191207-220613~2.jpeg
 
I just brewed brewed my funhouse stout. First time in a couple years since I've made it, It was a recipe I always really liked.
 
Pipeline is getting a bit thin, since I "have to" kill a keg by tomorrow to switch out the o-rings; so will do a quick WF lager batch tomorrow that will get kegged next weekend (yes I know I'm crazy but I've done it before, beer was perfect). Got a nice packet of o-rings from allmymoneyzgone today and plan to switch out as many as I can tomorrow; big ones are fine on most of them (I have seven usable ones) but the post o-rings all need to be changed.
 
It's from this book, pg 150.
15764613638635574312771544060934.jpg


10.5 lbs pale ale malt
3 lbs Munich malt (10°L)
1 lb aromatic malt
0.5 lb Weyermann Carafa Special III
2 lbs Belgian Candi syrup (Dark2)(15minutes)
1.5 lbs cane sugar (15 minutes)

3.5 AAU Wye Challenger (60)
1.3 AAU Styrian Goldings (20)

Wyeast 3787 or WLP530

1 cup dextrose (if priming)

Step mash:
135° 15 mins
145° 35 mins
165° 25 mins
172° 5 mins

60 minute boil (6 gallons collected)

I was planning on going a little light on the dark syrup, or partially replacing with D45.

OG=1.100. FG=1.017. IBU=16. SRM=37. ABV=11%

Cheers!
 
Last edited:
Thanks! Yea I did the CSI Westy 12 clone using 2.5lbs D-180. Although the beer is only 6months old in the keezer the next batch I will likely drop the D-180 down to 2lbs.
 
Well, here's my holiday brew for Christmas, as I Brewed a Brickwarmer Holiday Red Ale Saturday. It's a 5G Extract w/steeping grains recipe from Northern Brewer. Unfortunately it won't be ready in time for drinking on Christmas Day. All well, I guess.
 
I'm kind of planning to brew a strong-for-style witbier. Strong, so if my efficiency is way off it will still be okay. (the grist will be 5 pounds of pilsner malt and 5 pounds of fresh bread to make 4 gallons; first time I've tried that)

I haven't decided whether to use T-58 yeast, or an unknown wheat beer yeast cultured from bottles of Schell's Hefe. The Schell's yeast is reasonably neutral but cloudy and kind of tart. That could work for a wit. But I have lots of packets of T-58, and it would be spicier and maybe attenuate less... Which do y'all think?
 
Brewed a Golden Ale today. Used Galaxy hops. 87% mash efficiency, 70% brew house efficiency. Spot On.

I brewed based on scheduled yeast delivery via US Mail. I cooled the wort, went to the mailbox to get the yeast, drained the kettle into the fermenter and pitched the yeast. Just In Time Logistics.
 
I’m brewing a Blonde Ale; waiting on the boil right now. Was going to brew a Scotch Ale but decided to do something a little simpler to keep the pipeline full. Experimenting with a 30 min mash and boil. The SGs so far have been in line with what I’ve gotten with this recipe and a 60 min mash.
 
Up early to finish going over the checklist for today's group brewday at a buddy's house. Had a horrible dream this morning that I was dumping out my spent grain, only to realize I hadn't sparged yet! Yep only a homebrewer's bad dream. His house is only about 10 minutes away so if I forget something it's not the end of the brewday, but I don't want any glitches today. Also it's raining like a b***h, gonna be a wet one as we'll be brewing outside. Can't wait to get going, still gonna brew Edwort's porter.
 
I’m brewing a Blonde Ale; waiting on the boil right now. Was going to brew a Scotch Ale but decided to do something a little simpler to keep the pipeline full. Experimenting with a 30 min mash and boil. The SGs so far have been in line with what I’ve gotten with this recipe and a 60 min mash.

The shorter mash and boil times sure make the brew day go by quickly. I was done and cleaned up in under 4 hours. Beersmith predicted .048; mine came in at .050. Depending on how this beer finishes I might do this more often, at least for certain styles.
 
The shorter mash and boil times sure make the brew day go by quickly. I was done and cleaned up in under 4 hours. Beersmith predicted .048; mine came in at .050. Depending on how this beer finishes I might do this more often, at least for certain styles.

I do Yoopers Haus w 30m boil but I've found I like the extra flavor 60m mash gives over 30m mash. Darker recipes like my altbier Alaskan Amber really benefits from 60m mash even more than pales and lighter styles.
 
I do Yoopers Haus w 30m boil but I've found I like the extra flavor 60m mash gives over 30m mash. Darker recipes like my altbier Alaskan Amber really benefits from 60m mash even more than pales and lighter styles.
Yeah, I wanted to try this on a simple, lighter beer. I brew quite a few darker and/or more complex grain bill beers and I wouldn’t expect the shorter mash to be a benefit with those recipes.
 
I finally got my hands on the White Labs WLP515 Antwerp Ale yeast, so we are in the middle of a mash out on a Belgian Pale Ale!


John
 
Back
Top