That's a monster CFC. Who makes that one?
Here's 'Qbert' pump and gravity fed. Electric mash and propane boil/ hlt.View attachment 603156View attachment 603157
My single vessel built with BrewManiacEx controller. Still have some adjustments but for now it delivers what I need.
View attachment 599697
Looks like a livestock water tank for an exaughst hood. How well does that work without dripping and does the rolled edge catch water and then drains off out of picture? What type of fan/fans are you using? Evey thing home made I've done eventually drips, and not a huge fan of drippings in my kettle. Thanks in advance!
My fermentation set up
I found the key is good airflow. I use a similar setup that would typically allow dripping back but with a 600cfm exhaust (I think) there's zero condensation buildup in the hood. I also have a larger than most kettle with a higher than typical boiloff rate. CheersLooks like a livestock water tank for an exaughst hood. How well does that work without dripping and does the rolled edge catch water and then drains off out of picture? What type of fan/fans are you using? Evey thing home made I've done eventually drips, and not a huge fan of drippings in my kettle. Thanks in advance!
NOW, this is a real MAN CAVE!
And it's all stored in a shed out back.
-TC
Need more info as I have a Brew-Boss and am looking towards my stand options. I am planning on building my own, but this looks nice as well if it's well priced and supports the weight .
I like your sink.. Am thinking about adding one to my brew house (garage). Aside from being able to get suds on things and rinse, are you able to get a little gunk in it as well, or is it purely for 100% liquid for the drain?
That sink is one my favorite pieces of brewing equipment... Perfect for washing kegs, cleaning carboys, tipping the boil kettle (on the right in the photo) on its side for easy spray cleaning... it's awesome.I like your sink.. Am thinking about adding one to my brew house (garage). Aside from being able to get suds on things and rinse, are you able to get a little gunk in it as well, or is it purely for 100% liquid for the drain?
It's a single vessel with wort recirculation just like Grainfather. Inside the keggle there is this basket used for filtering.Very neat. Please tell me more about your rig !
It is a bigger version of the Grainfather? BIAB or do you insert a 2nd vessel inside for the mash tun ? Did you roll the steel for the base ? Is the pump contained in the base or mounted on the outside ?
Tried to "play" a couple of times and then realized it was a screenshot, LOL.Custom e biabasket. 21.5 gal stout tank w 240V connection & tangical whirlpool. Arbor fab basket, riptide pump, ss recirculation manifold, and auber cube controller. I finally got to do my first brew on it last week and I'm impressed. Can't wait to dial it in. 75% BH efficiency on first tryView attachment 603344
Yes. I think it's a little modified from their setup. I believe they went through brew hardware. I got mine directly from stout. I have a domed dish bottom. But I'm pretty sure they are all stout tanks. I love it so far. Went from making good beer with propane and wilser bag to amazing beer with this setup.Tried to "play" a couple of times and then realized it was a screenshot, LOL.
In the end you bought the same kettle as Freddy, andrew and Irish brewer did, right? This kettle looks pretty nice. Congrats.
It's a single vessel with wort recirculation just like Grainfather. Inside the keggle there is this basket used for filtering.
Yes, I have this friend with access to a shop. He rolled the steel sheet to make this base to accomodate the controller and the pump.
Everything is controlled through the smartphone.
¹ I designed the basket to fit inside the keggle and this friend built it. There is nothing fancy. It's just a basket, solid on sides and laser perforated at the bottom. Something like the Unibräu basket.¹ What basket did you use?
² Very neat and tidy.
³ What controller are you using?
After I cleared a space in my tool shed, I now have a brewshed!Here's my wire rack shelving, 3-vessle, AG setup with one pump.
Note: I plan to add metal shielding around the burner and hose-clamp to support the joints near the burner as a safety measure.
Here's the full post...
View attachment 599939
@omarke uses an aquarium chiller on his fermentor. That is a beer pump that he is using hot-side.Omarke, nice work though looks dangerously top heavy and tip prone. Hopefully a safety cable ties it off when in use.
How does the aquarium pump hold up to the heat? I have several but didn't think they could tolerate brewing temperatures.
Hello, his is my invention, its called Zeus1 Machine.
Mouth watering.
I also use the EZboil controllers as well as the same insulation wrap
Enter your email address to join: