Show us your sculpture or brew rig

[kenmcchord]

Here's my latest brew rig. Upgraded over the winter with a therminator and pump, 1/2" silicone lines with cam locks. Even have a nice thermometer on the outlet of the chiller. Just got to find some time to paint it!








Sent from my iPad using Home Brew

 

[Rohlk]

Missing from the pic is the boil kettle that is just on a burner stand on the ground. I figure why build when the truck does the trick.

 

[Rohlk]

This was the old rig.

 

[djt17]

Neat...multi-purpose rigs

 

[buzzen]

Here is mine, no the cooler doesn't go there.haha have only uswd it once. My buddy made the whole thing for me..

 

[old-pasture-brew]

Oh come on! Fire up that middle burner on full and take some pics. You know you want to....


Sent from my iPhone using Home Brew

 

[paulster2626]

Here it is, basically all done. With the BG14 burners I can switch from NG to propane if needed very easily with an orifice-swap. Needle valves work great for fine-tuning everything. Those are custom NG hoses as well - 2 of them cost $25 to get made, way cheaper than I thought they'd be.

Of course it's always a work in progress. I've since added a valve to the pump output, and a couple heat shields will be in the mix shortly.

 

[FortMillBrew]

Here is my simple gravity fed stand that I built from lumber reclaimed/repurposed from a deck I dismantled. Just need one additional burner.

 

[paulster2626]

That's excellent! I love re purposing stuff!

 

[jafo28]

Here's my latest brew rig. Upgraded over the winter with a therminator and pump, 1/2" silicone lines with cam locks. Even have a nice thermometer on the outlet of the chiller. Just got to find some time to paint it!

View attachment 196120
View attachment 196121
View attachment 196122
View attachment 196123
View attachment 196124


Sent from my iPad using Home Brew

Some of this looks familiar.

Looks great, Ken!

 

[groundchuck]

Some of this looks familiar.
Looks great, Ken!

Very familiar indeed.

 

[SafariJack]

Paul if you could hook me up with the source for those 90 degree needle valves that would be great!!


Sent from my iPhone using Home Brew

 

[paulster2626]

Paul if you could hook me up with the source for those 90 degree needle valves that would be great!!


Sent from my iPhone using Home Brew

They are just from the Blichmann conversion kit. The blichmann burner is just a BG14 - works like a charm.

http://www.northernbrewer.com/shop/natural-gas-conversion-kit-for-blichmann-floor-burner.html

 

[buzzen]

Oh come on! Fire up that middle burner on full and take some pics. You know you want to....


Sent from my iPhone using Home Brew

Well it might be another way to keep the mash warm...

 

[brewmasterorr]

My new upgrade. I will be brewing on it for the first time tomorrow. With a 10 month old and a 3 year old it took me about 6 months to put together. You can take a look at my blog and see some of my older setups. Brewmasterorr.blogspot.com.

 

[skagit991]

Here is my simple two teir put together using metal from an old truck rack. No fancy gadgets here but it does the trick. Hoping to add a pump soon though.

 

[Mysticmead]

Biab ftw!

 

[jorex]

Brew In A Bag -

 

[wbarber69]

Biab ftw!

I've never seen anyone else with a spoetzl keggle. FTW.

 

[mysobry]

Open ArdBir is project for process automation for “all grain” beer production with a single vessel (BIAB/RIMS) system.

https://m.facebook.com/pages/Open-Ardbir/606829852720387?_rdr

The micro controller “Arduino Uno” is the core of the automation process and can be used in both a fully automatic or manual mode. The controller automates all the phases from mashing in the grain to boiling the wort, this includes any required hop additions.

The controller delivers all these capabilities in a simple easy to follow and logical manner for beginner and advanced home-brewers alike. The system interacts and can be programmed via 4 Push Buttons, and an LCD feeds back all the relevant information the user needs in all the phases, whether used while setting or running the system.

A shield was developed in order to connect a Temperature Probe; SSR relay for controlling a heating element; Pump Relay; Signal Buzzer; along with the LCD display and 4 Push Buttons.

Enjoy
Davide

 

[limulus]

Here is mine, no the cooler doesn't go there.haha have only uswd it once. My buddy made the whole thing for me..

You must know something that your buddy wants to keep from his wife. That is the only way one of my pals would make something that nice for me

 

[Keith_O]

WOW! Some awesome rigs!
Lots of great ideas...

 

[justcopen]

After taking a year and a half off. "kind of burnt out from brewing after making all the beer for my wedding" I finely got the new rig together and now running some test. Just waiting for the coil for the HLT and I should be ready for my first batch to be run.

 

[buzzen]

You must know something that your buddy wants to keep from his wife. That is the only way one of my pals would make something that nice for me

I think he just likes the brew parties

 

[buzzen]

After taking a year and a half off. "kind of burnt out from brewing after making all the beer for my wedding" I finely got the new rig together and now running some test. Just waiting for the coil for the HLT and I should be ready for my first batch to be run.

Cool setup. What kind of controller? Is it easier to control with electricity?

 

[justcopen]

Cool setup. What kind of controller? Is it easier to control with electricity?

This is a Brewtroller controller pro which in my opinion is ruff compered to the BCS controller I have seen. This is probably because I suck at under standing the programing but the people that work their have the best customer service and have no problems with helping walking you through it.

The new Troller BX1 controllers might be better but have never used it.
https://www.oscsys.com/

So far electric is the way to go. No more going to get propane in the snow! The big bonus I see is controlling the temperatures and having it setup against the wall out of the way is also nice. I am still testing and hope to put grains in it next weekend and can give you more thoughts after if you want.

 

[justcopen]

I do need to rethink my labeling.

This just looks like SH*T from the moon.

 

[wbarber69]

I do need to rethink my labeling.

View attachment 198807

This just looks like SH*T from the moon.

I got me a brother labeler for mine. Came out great.

 

[Vetter]

My simple system, nothing like some of the true master pieces being posted, but hopefully it should work. I picked the table up for $20 in a auction, it used to be a check out counter at a beauty shop, it is built like a tank with a granite top. I welded up some racks for the Blichman floor burner to get it higher, and the HLT, I supply the water with a filter and hose.
I have never done AG before, hopefully I will be doing a 5 gal NB Deadringer kit for the first time next weekend. I just ordered two kits of Tiger Tank Altbier to do a 10 gal batch a week after.

 

[buzzen]

This is a Brewtroller controller pro which in my opinion is ruff compered to the BCS controller I have seen. This is probably because I suck at under standing the programing but the people that work their have the best customer service and have no problems with helping walking you through it.

The new Troller BX1 controllers might be better but have never used it.
https://www.oscsys.com/

So far electric is the way to go. No more going to get propane in the snow! The big bonus I see is controlling the temperatures and having it setup against the wall out of the way is also nice. I am still testing and hope to put grains in it next weekend and can give you more thoughts after if you want.

Does it utilize a Pid loop via milliamp signal?