Show us your sculpture or brew rig

[BigDaddyBeard]

It is in the latest BYO magazine. I will PM you with it.

How about you just post it to a new thread. Wouldn't mind giving it a go myself.

 

[dmcoates]

Here is my rig and brewing room.

 

[BrewMasta]

Here it is everyone, my 10 gal set up.

 

[Daddymem]

 

[mdunlap85]

my wooden sculpture

 

[NathPowe]

Here is my rig and brewing room.

And there was much jealousy.

Nice work dude.

 

[prosserbrewer]

Every brewery needs a sign right? Printed the letters one to a sheet and then traced with a wood engraver and used a woodburner to color them in. Finished off with a bunch of poly coats to mitigate sun bleaching. The secret to the propane system is the nice above ground tank you sort of see in the reflection - a truck comes and fills up on a regular schedule - plumbed into the shop wall with high pressure Very nice.



Morebeer 1550-esque design with a single March pump, copper HERMS coil, and tri-clovers all around. BK is 21 gallons. Have it in the shop and working on a panel with RTD probes. Also working on improving the floor and putting in a drain and gutter system.



After nearly 15 years in Marketing and Market Research... You just can't fight it... Sex Sells.

 

[eztommyd]

Built from an old rack I used to store kayaks.

 

[buzzny]

What's in my Brewhaus....

 

[nextgenxx]

After nearly 15 years in Marketing and Market Research... You just can't fight it... Sex Sells.

Is this your SWMBO? - if so nice catch!

 

[bryan34brew]

New rig I built with schedule 10 SS 18" and 22" pipe stubs. I have piped it for continuous RIMS system. Working now on a PID temperature control system that is pilotless.

 

[rockinmarty]

What's in my Brewhaus....

Nice bling!

 

[runs4beer]

He's my 30 amp 10 gallon batch electric HERMS system. I went around and around in DIY forum, this thread in particular trying to decide what to put it on. And then I saw a cart like this at work and found one at theshelvingstore.com that fit my need for $120 delivered and got a 20% off coupon...
The system is 100% DIY, the stand is 100% of the shelf!

 

[501irishred]

New rig I built with schedule 10 SS 18" and 22" pipe stubs. I have piped it for continuous RIMS system. Working now on a PID temperature control system that is pilotless.

Excellent idea, but where in the world did you come by 18" and 22" SS pipe?!

 

[buzzny]

RockinMarty Merci.

 

[sloanfamilydsm]

Two Grasshopper ROPS repurposed. A work in progress.

 

[501irishred]

Two Grasshopper ROPS repurposed. A work in progress.

I should follow your lead but leave the grasshopper intact. It would be easier to get the SWMBO to buy into my brewing if I could mow the lawn at the same time!

 

[Face Eater]

Well mine is still a work in progress but the first picture are the kettles and the second picture is where the stand is at right now. Will finish the welding this week and then assembly of this beast.

 

[kbowman]

Here's where I spend my weekends.

 

[heckels]

Here's mine. Three vessel, single tier, double pump. The base is two bin shelving units from Menards with a 2'x8' piece of butcher block counter top. Works great and the bins are great for added storage of specialty grains and gear.

 

[lushisalife]

My new single tier almost done. Still need to shake the bugs out with a water run.

 

[mr_rogers]

Here is my new and improved EBIAB single vessel rig! Finally moving upon the world of brewing!

[/IMG]

 

[Tamingthebrett]

My 2 tier brew stand From the wonderful world that is Wal-mart. Each shelf is rated at 800# We will see how it holds up for 449.99

 

[day_trippr]

My 2 tier brew stand From the wonderful world that is Wal-mart. Each shelf is rated at 800# We will see how it holds up for 449.99

I think you could buy an entire Wal-Mart for 449.99.

Did you mean 49.99?

Cheers!

 

[wilconrad]

As a long time consumer, here's my own contribution to the world of brew porn:
(more pics at the link in my signature, if you're interested)

 

[herc1354]

As a long time consumer, here's my own contribution to the world of brew porn: (more pics at the link in my signature, if you're interested)

Oh now this is some good brew porn, nicely done!

 

[riderkb]

Wilconrad, that is one pretty brewin rig! Did you do all that stainless welding yourself?

 

[day_trippr]

Wilconrad, that is one pretty brewin rig! Did you do all that stainless welding yourself?

If you're referring to the brew structure, it's assembled from aluminum strut...

Cheers!

 

[wilconrad]

Wilconrad, that is one pretty brewin rig! Did you do all that stainless welding yourself?

Thanks!

Day_trippr is correct, it's built out of 80/20 aluminum t-slot extrusions. I originally designed it to be a stainless weldment, but when I got that quoted it was nearly $1600, $700+ of which was materials. The 80/20 only cost me about $350 once it was all said & done, and I could build it myself. I'd recommend the 80/20 material if you're considering building a stand; it's easy to work with, low cost, doesn't rust and the slots make it easy to make mods/additions.

 

[14chow]

Compact and easy to use.