Show us your sculpture or brew rig

[craprocker]

 

[slakwhere]

broken.

 

[homebeerbrewer]

A man of few words...

 

[Homercidal]

A man of few words...

It's easy to rack up so many posts when they are null.

 

[bmickey]

I started thinking about brew stands after looking at all these beauties! I decided this was something I was going to build myself and to start off with I wanted to build a 3 tier gravity fed system. Here it is!

 

[willeck2]

It's not as fancy as some, but I just finished putting it together today and look forward to giving it a test run next weekend

 

[cowgo]

My eBIAB set up:

 

[Lucky_Chicken]

My eBIAB set up:

Holy copper batman!

 

[homebeerbrewer]

I started thinking about brew stands after looking at all these beauties! I decided this was something I was going to build myself and to start off with I wanted to build a 3 tier gravity fed system. Here it is!

Dude, that thing will support a truck. Mine only uses 2x4s for the uprights, and it's sturdy as it is.

As a side note, you might want to get some heat shielding under the burners. I used aluminum diamond plate because the wood under the top burner started to turn brown. My lower burner is freestanding.

 

[bmickey]

Dude, that thing will support a truck. Mine only uses 2x4s for the uprights, and it's sturdy as it is.

As a side note, you might want to get some heat shielding under the burners. I used aluminum diamond plate because the wood under the top burner started to turn brown. My lower burner is freestanding.

Yes it is quite sturdy! I have it on casters though so it is still easy to move around! Thought about adding some heat shields like you mentioned, we'll see.

 

[FSR402]

Well I have taken mine apart and put back together 3 times now. I posted the original setup here so I figured I would post the newest setup.
Here it is setup for the brew day yesterday.

30 gal HLT, 55 gal MLT, and 55 gal Kettle.
In front of it is my brewhemoth (22 gal) and my 35 gal conicals ready to be filled.

 

[Rivenin]

spent yesterday making this. sorry for the light glare!

if i was going to be enjoying st pattys day without being trashed... may as well have built something for my brewing

and that brings me to, 1000 posts!

 

[tulsabrewdaddy]

Upgraded to single tier natural gas. Just did a test run and everything seemed to run smooth, first batch next weekend!

 

[bmickey]

Well I have taken mine apart and put back together 3 times now. I posted the original setup here so I figured I would post the newest setup.
Here it is setup for the brew day yesterday.

30 gal HLT, 55 gal MLT, and 55 gal Kettle.
In front of it is my brewhemoth (22 gal) and my 35 gal conicals ready to be filled.

Nice, how many people are you brewing for?

 

[JoshuaWhite5522]

Well I have taken mine apart and put back together 3 times now. I posted the original setup here so I figured I would post the newest setup.
Here it is setup for the brew day yesterday.

30 gal HLT, 55 gal MLT, and 55 gal Kettle.
In front of it is my brewhemoth (22 gal) and my 35 gal conicals ready to be filled.

very nice, it that a SS Drum you are using for MLT and BK? what are you using to heat them?

 

[Nierika]

I really like that your keggles store nice and neat underneath!

 

[reccen]

My Setup

 

[FSR402]

very nice, it that a SS Drum you are using for MLT and BK? what are you using to heat them?

The kettle is a ss drum the mlt is a plastic drum.
I split batches with two other people.

 

[cbcbrewmasters]

here it is with all the blood sweat and tears

 

[homebeerbrewer]

Not mine, but it's at my shop.

 

[D3Brewing]

I finally finished my wood rig thanks the the inspiration received from this thread, especially Scuba Steve. Single tier natural gas. The hoses were swiped from a bio med facility we demolished a few months ago. My biggest concern is my homemade false bottom. It's 16 ga. SS so it should hold but I'm not sure how it will be for sparging. We'll find out next weekend.

 

[evandena]

Taught myself how to weld, sweat copper, thread pipe, but here she is:

My two tier natural gas stand. I love it.

 

[2NobleDogs]

Taught myself how to weld, sweat copper, thread pipe, but here she is:

My two tier natural gas stand. I love it.

View attachment 55980

Great Color scheme

 

[evandena]

Great Color scheme

Hah... Pretty similar.

 

[diS]

My new brew pal

 

[ldepaoli]

Find my brew stand

 

[DUNDASJ]

Here's my baby.

 

[yukonCorneliusKeg]

Welp, here she is finally. My brutus magic.(2 tier on a budget. The budget that got away from me that is more accurate.

 

[sv_1]

Bad cellphone pic... BCS460 controlled, 2- 5500w elements that can run at once, brewers hardware rims tube, "tippy keg" Still need to mount the panel to the wall and put some finishing touches on it. So far its been working well.

 

[yukonCorneliusKeg]

Welp, here she is finally. My brutus magic.(2 tier on a budget. The budget that got away from me that is more accurate.

<img src="https://www.homebrewtalk.com/attachment.php?attachmentid=56339"/>

Here is another picture of my brew sculpture .



I like the swing out arm for the control panel. It makes it easy to swing it out of the way when I am doing some stirring etc. and it is not in the way ever. I got that idea from someone here.