smagic14
Well-Known Member
- Joined
- Jun 27, 2013
- Messages
- 270
- Reaction score
- 51
Well here it is finally pulled the trigger on a Craigslist freezer.. Can fit 4 kegs in here and a co2 tank! View attachment 1429706223267.jpg
Get's the job done.
Don't care for the belgian too much. Loved the kolsch and session ipa, and i just finished the holy moses. it's a nice spring sample but nothing to go crazy over.What do you think of those new varieties from Great Lakes that I see in there?
I bought the 12 pack a couple weeks ago. I like the Kolsch and the American Ale but the Holy Moses I've never cared for. Also that Belgian is no good either. Those are 2 types of beers that I would just rather not even drink. Of course if someone likes that style they may be good. I just don't.
Don't care for the belgian too much. Loved the kolsch and session ipa, and i just finished the holy moses. it's a nice spring sample but nothing to go crazy over.
I didn't get a session IPA. There was just the kolsch, american ale, holy moses and the belgian.
The american ale is a session ipa
This is in my garage.
From left to right: ESB on Nitro, Simcoe IPA, Barrel-aged Saison (kegging this week), Robust Porter, Sour Saison with all-OEC dregs.
View attachment 273337
View attachment 273338
Micromatic Stainless stout faucet and stainless Perlick 630s. Stainless shanks and tailpieces, as well. I am mounting a stainless drip tray for the beers on CO2 in the next week or two.
Cool... Did you make those door handles & trim? That's awesome...
With that many taps, I'd feel like I was put in a round room and told to go sit in the corner...
I just finished mine.
The build itself wasn't much. Just added wheels to it. Added a stainless steel plate onto of it and drilled a hole for the tower.
The tower is a snake tower from Krome. I have 2x Perlick 650ss and the drip tray is also from Krome.
My build. 3 tap Keezer using a 5.1cf Danby freezer. 2x5g and 1x2.5g.
I also did the glass cabinet. The bottom part is holding the 13lbs CO2 bottle.
Those plugs are also little brushes to clean the taps with. Not necessarily these types of plugs, but, if you have cats, any plug is a must.
Thank you!Those are fantastic! That is one of the nicest I've seen. Very well done!
Do you recommend those plugs on the ends of the taps when not in use?
Actually, the up-side to the faucet cap is with the tight seal the beer doesn't dry out and become sticky. Otoh, faucet brushes don't actually seal, the plastic base just butts up against the edge of the spout, so air will get in. Then you have a bristley thing soaked in beer that dries out. Nasty...
Cheers!
Even with a tight seal it would dry up and get gummy. That's why I went for the brushes. They're both good in the end.
I bought an old kegerator off of craigslist for $100. It came with a full tank, empty keg and lots of grime and dirt. I starting making it over today.
I bought an old kegerator off of craigslist for $100. It came with a full tank, empty keg and lots of grime and dirt. I starting making it over today.
Thats why those bastards are locked out of the room where my kezzer is just in case untill i figure out how to stop/prevent them from opening the tap.
You guys have me freaking out now. We just got a cat a few weeks ago. No issues with her and my kegerator. So far...
You guys have me freaking out now. We just got a cat a few weeks ago. No issues with her and my kegerator. So far...
My build. 3 tap Keezer using a 5.1cf Danby freezer. 2x5g and 1x2.5g.
I also did the glass cabinet. The bottom part is holding the 13lbs CO2 bottle.
Just installed the TV and now its complete!
Enter your email address to join: