dunleav1
Well-Known Member
Has anybody figured out a way to get the "labels" off the Stone Ruination bottles?
Reuse Stone Ruination bottles
- Thread starter dunleav1
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
jimba009
Well-Known Member
a soak in starsan for about a day or two takes them off. there is a thread around here somewhere about label removel.
To remove screen printed labels I use a solution of one part muriatic acid (available at places like Lowes, HD, and tractor supply company) to three to four parts water (depending on the strength of the labels i'm removing). Let those sit for around half an hour and most labels literally rinse right off or come clean with a wipe of a paper towel.
*Important note of caution*
Muriatic acid is hydrochloric acid, so be really careful when using it. This stuff will give you a chemical burn if you aren't careful. Always add acid to water, and not the other way around. Personally I always use nitrile gloves and NEVER EVER breath the fumes from the concentrate bottle.
End note of caution
*Important note of caution*
Muriatic acid is hydrochloric acid, so be really careful when using it. This stuff will give you a chemical burn if you aren't careful. Always add acid to water, and not the other way around. Personally I always use nitrile gloves and NEVER EVER breath the fumes from the concentrate bottle.
End note of caution
Ben25
Well-Known Member
Just leave 'em on, they look cool!
dunleav1
Well-Known Member
starsan at the default strength for 5 gallons works in about 20 hours.
