• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

New England IPA "Northeast" style IPA

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Speaking of Bootleg's Conan strain, I just made a split batch with it.

Front: Nelson, Motueka, Citra (5:2:1, 5lbs/bbl): big peach rings, pineapple and papaya notes throughout. Sweet, juicy, with a funky tropical note that Conan brings. While this combo was good, I might stick with Citra and Mosaic for the next Conan batch. Just missing a little extra pop.

Back: Galaxy, Mosaic, Strata (3:1:1, 5lbs/bbl): trademark Galaxy passionfruit and peach are present, but are overshadowed by a peanut-like herbal bite. I was hoping this beer would get better with time, and it did a little, but damn. 2023 Hop Alliance Galaxy is not a hit. I've had some beers with 2023 YVH Galaxy lots that were so much better than this.

This Conan strain has been awesome for me for the Heady clones, but either my pH was off or the hop quality has been bad for this batch. I got meaty/vegetal notes from the judges on the Nelson variant when I submitted it to comp. I got 37 points and this is a beer I'd probably order drink at a brewery, but it's not a 4-pack that I'm bringing home. Or maybe I get a little O2 ingress when I was rousing the kegs during the DH stage...
 

Attachments

  • 1000018254.jpg
    1000018254.jpg
    75.5 KB
Speaking of Bootleg's Conan strain, I just made a split batch with it.

Front: Nelson, Motueka, Citra (5:2:1, 5lbs/bbl): big peach rings, pineapple and papaya notes throughout. Sweet, juicy, with a funky tropical note that Conan brings. While this combo was good, I might stick with Citra and Mosaic for the next Conan batch. Just missing a little extra pop.

Back: Galaxy, Mosaic, Strata (3:1:1, 5lbs/bbl): trademark Galaxy passionfruit and peach are present, but are overshadowed by a peanut-like herbal bite. I was hoping this beer would get better with time, and it did a little, but damn. 2023 Hop Alliance Galaxy is not a hit. I've had some beers with 2023 YVH Galaxy lots that were so much better than this.

This Conan strain has been awesome for me for the Heady clones, but either my pH was off or the hop quality has been bad for this batch. I got meaty/vegetal notes from the judges on the Nelson variant when I submitted it to comp. I got 37 points and this is a beer I'd probably order drink at a brewery, but it's not a 4-pack that I'm bringing home. Or maybe I get a little O2 ingress when I was rousing the kegs during the DH stage...
I've pretty much just throw out all my galaxy for this reason.
 
To be honest, if you follow the best practices in this thisead I’m sure you’re already doing everything right. Just remember the availability of hops they have, I mean they literally get hop farms reaching out to them and giving them free hops to see what fidens think so that fidens will make a beer with their hops and note the hops are from their farm
I've given up chasing what the big guns do because of this reason alone. The drop off in the standard of hops we get is huge so never going to get close.
 
I've given up chasing what the big guns do because of this reason alone. The drop off in the standard of hops we get is huge so never going to get close.
Let me tell you, Galaxy from 2016 to 2018 was bangin for us homebrewers. Unfortunately, it hasn't even been in the same galaxy since then.
 
Is there an updated survivable compound chart with hops like strata and the NZ’s?

I did a hazy pale with strata heavy in WP and DH and it was very muted.
 
Is there an updated survivable compound chart with hops like strata and the NZ’s?

I did a hazy pale with strata heavy in WP and DH and it was very muted.

There was one chart that included some NZ's in a youtube video not too long ago. Trying to find the name of it. Anyway here is my screenshot.

EDIT: Found it.
 

Attachments

  • Screenshot_20240611-063947.png
    Screenshot_20240611-063947.png
    662.7 KB
Hell yes brother, good to see you doing well! I saw Dopo in CB&B and immediately thought of you! It's awesome to see the recipe. I know you're allowed to do cans of higher ABV stuff, would you just scale this recipe for those?

I've been loving Bootleg's New England, such a great yeast. Can't get enough of it.

We tend to brew 6.5% IPA and 8% Doubles although we only make 4 or so double IPAs a year. As ABV goes up the water profile tends to switch to more sulfate heavy and we do everything to make sure they finish at 3plato or below. I hate sweet beer and strive for drinkability so we try to counter the additional body and sweetness from the additonal alcohol. Grain bill gets more Pils and less 2row and usually just 1-2% of some c10-c15.

We make one “affordable” 6.5% IPA that’s hopped at virtually the same amount as Dopo but the most get around 3.5#/bbl in DH. Doubles get 4# to 5#/bbl max.

As far as Survivables go in my opinion most NZ hops make it through fermentation better than any hop from the US. Riwaka and Nectaron are tops of that list. Keep in mind certain yeasts also allow hops to come through more than others. If you’re looking for more pure hop impact, colder fermentations (especially if you use LA3) will let the hops shine instead of being trampled by esters. Also if you haven’t tried German Ale yeast for this style I’d reccomend it or even blend it in with an English yeast. That yeast can do some interesting things to hops.
 
We tend to brew 6.5% IPA and 8% Doubles although we only make 4 or so double IPAs a year. As ABV goes up the water profile tends to switch to more sulfate heavy and we do everything to make sure they finish at 3plato or below. I hate sweet beer and strive for drinkability so we try to counter the additional body and sweetness from the additonal alcohol. Grain bill gets more Pils and less 2row and usually just 1-2% of some c10-c15.

We make one “affordable” 6.5% IPA that’s hopped at virtually the same amount as Dopo but the most get around 3.5#/bbl in DH. Doubles get 4# to 5#/bbl max.

As far as Survivables go in my opinion most NZ hops make it through fermentation better than any hop from the US. Riwaka and Nectaron are tops of that list. Keep in mind certain yeasts also allow hops to come through more than others. If you’re looking for more pure hop impact, colder fermentations (especially if you use LA3) will let the hops shine instead of being trampled by esters. Also if you haven’t tried German Ale yeast for this style I’d reccomend it or even blend it in with an English yeast. That yeast can do some interesting things to hops.

I remember Pinthouse saying they use Kolsch yeast for their IPAs on their CB&B episode and I'm curious to try this one day! You use it in any of your IPAs?
Reference: https://learn.beerandbrewing.com/courses/brewing-modern-ipas
 
What percentage of maltodextrin would be suitable for a DIPA? Last two beers I've brewed have probably been my best and brewed with A24. Both beers went from 1.081-1.016 and have good mouthfeel but would like that fuller Fidens mouthfeel. Plugged in 3% maltodextrin into my last recipe and that seems to get me finishing around 1.020-22 which is where I prefer. I could probably mash slightly higher but already mash on the high side 67C (152.6F).

Recipe is already 16% Spelt, 20% oats, mix of flaked and malted and 8% chit malt. A24 is just a beast of a strain. Any other ideas how I could boot mouthfeel without maltodextrin?
 
Mash at 156

152 is not high

No need for Malto.

Pinthouse uses 1007, as does Single Hill. Both those guys came from Odell who also uses it. K97 kinda sucks as a dry yeast. It doesn’t dry well so you have to use 2-3x as much.

I think 1007 is more interesting than Chico and really lets hops shine. It supposedly has really high biotransformation capabilities as well. Can create some unique flavors through fermentation. Or at least different flavors. I haven’t used it since homebrew days. I think it would be cool with LA3 variants. Reduce the cake frosting effect from that yeast.
 
Mash at 156

152 is not high

No need for Malto.

Pinthouse uses 1007, as does Single Hill. Both those guys came from Odell who also uses it. K97 kinda sucks as a dry yeast. It doesn’t dry well so you have to use 2-3x as much.

I think 1007 is more interesting than Chico and really lets hops shine. It supposedly has really high biotransformation capabilities as well. Can create some unique flavors through fermentation. Or at least different flavors. I haven’t used it since homebrew days. I think it would be cool with LA3 variants. Reduce the cake frosting effect from that yeast.
Excellent, thanks for that. I wouldn't have attempted going that high but I'll give 156 a go on my next brew in a few weeks and hold off on the maltodextrin.
 
I bought a half pound of HBC 1019 from YVH. The smell when I opened the bag was crazy. I haven't smelled hops like these since 2016 Galaxy. Going to brew an all HBC 1019 single hazy. Just trying to figure out how much for the WP and DH. This will be a 2 gallon batch. If anybody on here has used them, let me know how you liked it.
 
I bought a half pound of HBC 1019 from YVH. The smell when I opened the bag was crazy. I haven't smelled hops like these since 2016 Galaxy. Going to brew an all HBC 1019 single hazy. Just trying to figure out how much for the WP and DH. This will be a 2 gallon batch. If anybody on here has used them, let me know how you liked it.
I think this is probably one of the best "sabro" ish hops out there, got the coconut vibe but just enough together with tons of tropical fruit as well, really enjoyed that one
 
I bought a half pound of HBC 1019 from YVH. The smell when I opened the bag was crazy. I haven't smelled hops like these since 2016 Galaxy. Going to brew an all HBC 1019 single hazy. Just trying to figure out how much for the WP and DH. This will be a 2 gallon batch. If anybody on here has used them, let me know how you liked it.
I used at 33% together with superdelic and citra and it dominated quiet a bit, I think it was just right at that amount so you can get the character.
 
I bought a half pound of HBC 1019 from YVH. The smell when I opened the bag was crazy. I haven't smelled hops like these since 2016 Galaxy. Going to brew an all HBC 1019 single hazy. Just trying to figure out how much for the WP and DH. This will be a 2 gallon batch. If anybody on here has used them, let me know how you liked it.

Most potent hop I've used since the good galaxy days. I think it's fantastic! Definitely coconut (but not woody/earthy like Sabro), plus sweet orange and tropical fruits.
 
I bought a half pound of HBC 1019 from YVH. The smell when I opened the bag was crazy. I haven't smelled hops like these since 2016 Galaxy. Going to brew an all HBC 1019 single hazy. Just trying to figure out how much for the WP and DH. This will be a 2 gallon batch. If anybody on here has used them, let me know how you liked it.
Just use the standard. 2lb/bbl whirlpool 4lb/bbl rate for dryhoping
 
1019 is incredibly strong. In a beer with 586/Nectaron DH only 10% 1019 is very noticeable. You can almost get away with using less it’s so strong. To me it’s straight up Haribo gummy peach candy at first. The goes to tangerine. It has some of the woody/rum barrel character but it’s way way better than Sabro. It’s still a polarizing hop. Interested to see
How it evolves.
 
Anyone in this thread listen to recent Brulosophy episode about the "gas hopper"? Sounds like an interesting alternative to dry hopping with less O2 exposure risk and less beer loss due to hop absorption.

The basic premise is have two kegs - one with carbonated beer (ferment and close transfer but skip dry hopping basically) and one with hops in water. The beer keg is kept cold and hop keg is kept warm. The hop aromas basically come to equilibrium over time effectively hopping the beer without contact. The "inventors" claim to have gotten very good hop flavors in 24 hours.

I'm a little skeptical but if it worked it seems like it would have several advantages. I also have been struggling to find enough time to brew lately and don't really want to risk a batch to trial until I have more time.

An interesting thing they didn't talk about on the podcast if the process works is I think you could also use it to either "delay hop" or "rehop" a beer. I often brew smaller batches with NEIPAs for fear of them not being consumed while fresh. It seems like this way there might be potential to brew bigger batches and wait to "gas hop" them until the previous keg is about to kick. I also wonder if you had a keg where the hop flavors started to fade some if you could just repeat the process to freshen it up a bit.
 
Anyone in this thread listen to recent Brulosophy episode about the "gas hopper"? Sounds like an interesting alternative to dry hopping with less O2 exposure risk and less beer loss due to hop absorption.

The basic premise is have two kegs - one with carbonated beer (ferment and close transfer but skip dry hopping basically) and one with hops in water. The beer keg is kept cold and hop keg is kept warm. The hop aromas basically come to equilibrium over time effectively hopping the beer without contact. The "inventors" claim to have gotten very good hop flavors in 24 hours.

I'm a little skeptical but if it worked it seems like it would have several advantages. I also have been struggling to find enough time to brew lately and don't really want to risk a batch to trial until I have more time.

An interesting thing they didn't talk about on the podcast if the process works is I think you could also use it to either "delay hop" or "rehop" a beer. I often brew smaller batches with NEIPAs for fear of them not being consumed while fresh. It seems like this way there might be potential to brew bigger batches and wait to "gas hop" them until the previous keg is about to kick. I also wonder if you had a keg where the hop flavors started to fade some if you could just repeat the process to freshen it up a bit.
Was this done is one of there exbeeriments where they couldnt find a statistical difference between a "gas" hopped and a dry hopped beer? :D
 
The basic premise is have two kegs - one with carbonated beer (ferment and close transfer but skip dry hopping basically) and one with hops in water. The beer keg is kept cold and hop keg is kept warm. The hop aromas basically come to equilibrium over time effectively hopping the beer without contact. The "inventors" claim to have gotten very good hop flavors in 24 hours.

I am not positive of the setup, but I got the impression that it was not just a static transfer of aroma. That CO2 was pumped through the "hop + water" and bubbled through the beer. I am not sure if more details of the process are available for free ("gas hopper" searches turn up mostly hits on a Edward Hopper painting). There is this one page poster linked from the show notes:

https://brulosophy.com/wp-content/uploads/2024/07/TBL162PhilWietstockBrianGibsonPresentation.pdf
 
I am not positive of the setup, but I got the impression that it was not just a static transfer of aroma. That CO2 was pumped through the "hop + water" and bubbled through the beer. I am not sure if more details of the process are available for free ("gas hopper" searches turn up mostly hits on a Edward Hopper painting). There is this one page poster linked from the show notes:

https://brulosophy.com/wp-content/uploads/2024/07/TBL162PhilWietstockBrianGibsonPresentation.pdf
I had that impression at first as well, but then in the follow up episode I thought they just said connect the posts and let it stabilize. I would have less skepticism on the concept if there was something to actively move the CO2 through the hop solution. That does make the setup a little more challenging, but not terribly since I'm sure a person could find a simple diaphragm pump or similar to make it work.
But until I hear more I'm probably going to wait to potentially waste a batch until I hear a bit more.
 
View attachment 853546
My most recent batch. Inspired by fidens Margaret Maggie.
Abv 8%
Grain bill:
Rahr north star pils 80%
Flaked oats 20%
Hops
60min : ctz 11 ibus
Whirpool citra 20 ibus
Dry hop:
Citra 2 oz, citra Cryo 4 oz, cashmere Cryo 2 0z, cashmere 2 oz
Yeast: wyeast1272

1. How is 1272 compared to 1318 in the final beer?

2. Do you like this more simple grain bill compared to a heavy adjuncts one (brujos for example). Nowadays I lean more to simple grain bill like yours. I don't really see a benefit for 20%+ adjuncts/proteins anymore.
 
I like both strains tbh. I did a step mash: protein rest 131 for 15 min / alpha 158 for 45 to produce a more dextrinous wort. I’m very happy with the body and creamy mouthfeel it produced. If I had 2 row I would’ve mashed at a lower temp around 156. Yeah I find a simple grainbill works best for most beers.
 
View attachment 853546
My most recent batch. Inspired by fidens Margaret Maggie.
Abv 8%
Grain bill:
Rahr north star pils 80%
Flaked oats 20%
Hops
60min : ctz 11 ibus
Whirpool citra 20 ibus
Dry hop:
Citra 2 oz, citra Cryo 4 oz, cashmere Cryo 2 0z, cashmere 2 oz
Yeast: wyeast1272
Looks great. Do you find its close to Fidens overall? What was your OG and FG? Really tempted to try this strain even though I've finally found my go to strain in A24 but love tinkering. Also the simple grain bill would be an added bonus. Would you mind sharing your water profile for this too? From the Podcast they did a few months ago, they seem to go low on salts.
 
Back
Top