1990dtgl98
Well-Known Member
Hey guys, I'm just wrapping up my chest freezer to kegerator conversion, and had a few Love temp wiring questions.
I bought the TSS2 to possibly use it as a fermentation chiller as well. I figured it would be better to buy it and not need it, then buy say the TS2 and kick my myself for not having a heating element later.
So what I was wondering was if there was anyway to turn off the SP2 relay since I wouldn't be using it for a while? I know I could just set SP2 to say 10 degrees and leave my SP1 cooling relay to 40, but I'd like to know if there was a setting that allowed you to completely turn it off?
Also, I'm confused already trying to read through the manual. I know r2 is the deviation from the temp, but what does c1=dir and c2=inv r0=dep?
What does changing these do? The manual isn't very helpful in explaining everything....
If I only wanted the cooling function, and wanted my freezer at say 40 degrees with a 1 degree temp swing, what would the settings need to be?
P5=1
c1= dir
c2= inv
r0= ind
SP1= 40
SP2= 10 (or anything lower than 40)
r1= 1 (or 2 for a 2 degree temp swing, correct?)
r2= 1
I think that would work?
__________________
I bought the TSS2 to possibly use it as a fermentation chiller as well. I figured it would be better to buy it and not need it, then buy say the TS2 and kick my myself for not having a heating element later.
So what I was wondering was if there was anyway to turn off the SP2 relay since I wouldn't be using it for a while? I know I could just set SP2 to say 10 degrees and leave my SP1 cooling relay to 40, but I'd like to know if there was a setting that allowed you to completely turn it off?
Also, I'm confused already trying to read through the manual. I know r2 is the deviation from the temp, but what does c1=dir and c2=inv r0=dep?
What does changing these do? The manual isn't very helpful in explaining everything....
If I only wanted the cooling function, and wanted my freezer at say 40 degrees with a 1 degree temp swing, what would the settings need to be?
P5=1
c1= dir
c2= inv
r0= ind
SP1= 40
SP2= 10 (or anything lower than 40)
r1= 1 (or 2 for a 2 degree temp swing, correct?)
r2= 1
I think that would work?
__________________