hafmpty
Well-Known Member
I've been think of converting my three Blichmann burners to NG. I went down to my basement to check the situation out and saw that behind my dryer there is what looks like an unused appliance hookup. It's a couple feet from the door that leads out to the patio where I brew. If I were to attach a shut off valve with a quick disconnect to the male flare sticking out of the pipe and then attach a 10-15ft 1/2" NG rated hose and take it outside and hook it up to the burners (with needle valves attached of course), would I have he necessary parts to get NG to my burners?
I never run all three burners at the same time, but if I ever need to, what would be the best method of hooking this up (T inside after the on/off valve to three separate hoses? One long hose to a three way split to flex hose? What?)
I've got a friend who will help with the installation so I won't blow myself up.
I've attached a couple pictures because I want to know what I'm looking at. Is the first picture the on/off valve for the line? The second picture is the flare outlet.
Sent from my iPhone using Home Brew
I never run all three burners at the same time, but if I ever need to, what would be the best method of hooking this up (T inside after the on/off valve to three separate hoses? One long hose to a three way split to flex hose? What?)
I've got a friend who will help with the installation so I won't blow myself up.
I've attached a couple pictures because I want to know what I'm looking at. Is the first picture the on/off valve for the line? The second picture is the flare outlet.
Sent from my iPhone using Home Brew