adamyoung
Well-Known Member
Have a few electric brewery parts available - all of this was from a build I got that was set as a rudimentary eHERMS setup, and I think someone could make that happen with these:
$115 for all of the following:
2 x Camco 2962 ULWD 240V 5500W heating elements - have oxidation as pictured - from what I've read most people use either silicone after installation, or a sacrificial anode to negate that. I wound up going a different route and don't need these any longer, but they were fine and recently tested. $12 each or both for $20.
2 x NEMA 10-30P heavy-duty/large gauge plugs. $4 each or both for $6.
1 x custom switched distribution box (see pics) with 1 x 10-30R and 2 x 5-15R recepticles, pump and element switches, and a potentiometer (heat?) with 10-30P source plug (also has built-in fan). $10 because I don't know how it's wired, etc. - someone with basic understanding could figure out how this was used.
1 x junction box with 10-30R and 1/2" conduit and 3 x AWG 8 leads (seemingly used in conjunction with box above). $5
2 x Ranco ETC 111000 temperature controllers both wired with 1 x 5-15P input leads and a strip of 3 x 5-15R receptacles in each. $30 each or both for $55.
3 x 29-foot-long TNNC stranded AWG 6 wires - red, black, and white. $10 each or all 3 for $25.
1 x spool of what I'd guess is 200-300 feet AWG 10 wire (blue) for $25.
Much prefer local pickup and, of course, selling as a complete group. Shipping on some of this stuff could get pricey (particularly the wires) but if I don't get a local buyer, we could figure out how much shipping would cost. Thanks!
$115 for all of the following:
2 x Camco 2962 ULWD 240V 5500W heating elements - have oxidation as pictured - from what I've read most people use either silicone after installation, or a sacrificial anode to negate that. I wound up going a different route and don't need these any longer, but they were fine and recently tested. $12 each or both for $20.
2 x NEMA 10-30P heavy-duty/large gauge plugs. $4 each or both for $6.
1 x custom switched distribution box (see pics) with 1 x 10-30R and 2 x 5-15R recepticles, pump and element switches, and a potentiometer (heat?) with 10-30P source plug (also has built-in fan). $10 because I don't know how it's wired, etc. - someone with basic understanding could figure out how this was used.
1 x junction box with 10-30R and 1/2" conduit and 3 x AWG 8 leads (seemingly used in conjunction with box above). $5
2 x Ranco ETC 111000 temperature controllers both wired with 1 x 5-15P input leads and a strip of 3 x 5-15R receptacles in each. $30 each or both for $55.
3 x 29-foot-long TNNC stranded AWG 6 wires - red, black, and white. $10 each or all 3 for $25.
1 x spool of what I'd guess is 200-300 feet AWG 10 wire (blue) for $25.
Much prefer local pickup and, of course, selling as a complete group. Shipping on some of this stuff could get pricey (particularly the wires) but if I don't get a local buyer, we could figure out how much shipping would cost. Thanks!
Attachments
-
Photo Feb 10, 7 45 06 PM.jpg1.3 MB · Views: 226
-
Photo Feb 10, 7 45 17 PM.jpg1.4 MB · Views: 230
-
Photo Mar 26, 9 01 43 PM.jpg1.7 MB · Views: 230
-
Photo Mar 26, 9 01 55 PM.jpg1.7 MB · Views: 225
-
Photo Mar 26, 9 02 24 PM.jpg2.1 MB · Views: 228
-
Photo Mar 26, 9 02 31 PM.jpg1.9 MB · Views: 226
-
Photo Mar 26, 9 02 38 PM.jpg1.7 MB · Views: 226
-
awg6.jpg25.3 KB · Views: 222
-
awg10.jpg18.8 KB · Views: 217
-
Photo Apr 14, 5 43 14 PM.jpg1.8 MB · Views: 224