I just want to make sure I calculated this correctly. I have a standard converted cooler mash tun. What I did was put the mash tun on my level counter opened the spigot filled it with water until water same out of the spigot then stopped. when the water stopped coming out I measured what was left in the cooler and it turned out to be about a gallon of water.
I have a Couple questions. Did I do this right? Is that a abnormal amount of dead space for a cooler mashtun? Do i check the box in beersmith to adjust for this dead space?
I have a Couple questions. Did I do this right? Is that a abnormal amount of dead space for a cooler mashtun? Do i check the box in beersmith to adjust for this dead space?