I posted earlier today about poppets. Well I found what I needed about an hour from the house so I went for a ride. I just came up from the cellar after about 2 hours of work. I have two of the four kegs completely cleaned and totally rebuilt. My problem is that on one of the kegs the poppet valves are still leaking. I tried depressing them and letting them go and knocking on them, they just won't seal up. Only one of the kegs seams to be holding pressure. I won't know until I go back down to check it in a few hours.
I replaced both dip tube o-rings, both poppets, and both post o-rings, prior to putting it back together evertything was cleaned in PBW and lubricated with keg lube. I need help. Paul
I replaced both dip tube o-rings, both poppets, and both post o-rings, prior to putting it back together evertything was cleaned in PBW and lubricated with keg lube. I need help. Paul