steveperry
New Member
- Joined
- Jan 16, 2018
- Messages
- 4
- Reaction score
- 0
My STC-1000 has apparently failed and allowed the compressor to continuously run on my keezer driving the temperature to -28F.
Replacing the thermostat is easy enough, but through some research I have read that adding a Solid State Relay (SSR) can help prevent the thermostat from failing again.
I'm not sure what kind of SSR I would need.
Will this work? GEREE 24V-380V 40A 250V SSR-40 DA Solid State Relay Module
I will have to buy some additional wiring as well. What gauge should I buy? (The keezer is at a friends or else I would have the answer)
The freezer in use is a GE 5.0cf FCM5SUWW
Here is a wiring diagram that I drew up. If it is wrong, can someone point me in the right direction. Or confirm that it is correct. Any other tips are helpful as well.
Replacing the thermostat is easy enough, but through some research I have read that adding a Solid State Relay (SSR) can help prevent the thermostat from failing again.
I'm not sure what kind of SSR I would need.
Will this work? GEREE 24V-380V 40A 250V SSR-40 DA Solid State Relay Module
I will have to buy some additional wiring as well. What gauge should I buy? (The keezer is at a friends or else I would have the answer)
The freezer in use is a GE 5.0cf FCM5SUWW
Here is a wiring diagram that I drew up. If it is wrong, can someone point me in the right direction. Or confirm that it is correct. Any other tips are helpful as well.
Last edited: