• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Hello from Houston, TX

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Robert_B

New Member
Joined
Jul 6, 2009
Messages
3
Reaction score
0
Location
Houston, TX
Hey guys. Here's the obligatory introduction post:

I acquired a taste for good beer while serving in the military and travelling the world. My friends all label me a "beer snob"...

I've taken an interest in brewing my own as a means to a delicious beer that doesn't involve paying $12+ a bottle. So, I bought a book and started poking around online, gathering information and trying to decide what to buy and how to start. Here's where I am:

My local home brew shop sells a kit that appears pretty decent, with a 6 gallon plastic bucket for fermentation, 5 gal glass carboy for secondary, hydrometer, airlocks, thermometer, sanitizer, and so on. I'm leaning towards starting out brewing from grains, or at least a malt extract (not the canned stuff, is what I'm getting at) and kegging the end result (wife isn't excited about storing/saving/cleaning hundreds of empty bottles) for dispensing from a home-made kegerator (yet to be constructed, of course). I'll probably start accumulating equipment here soon and dive right in. I'm sure I'll be around here to pick your collective brain.

Any pointers/anecdotes/advice would be greatly appreciated, and I look forward to starting this new hobby and driving my wife nuts!

:mug:
 
Another Texan for the grinder!

My local home brew shop sells a kit that appears pretty decent, with a 6 gallon plastic bucket for fermentation, 5 gal glass carboy for secondary, hydrometer, airlocks, thermometer, sanitizer, and so on. I'm leaning towards starting out brewing from grains, or at least a malt extract (not the canned stuff, is what I'm getting at) and kegging the end result (wife isn't excited about storing/saving/cleaning hundreds of empty bottles) for dispensing from a home-made kegerator (yet to be constructed, of course). I'll probably start accumulating equipment here soon and dive right in. I'm sure I'll be around here to pick your collective brain.

Any pointers/anecdotes/advice would be greatly appreciated, and I look forward to starting this new hobby and driving my wife nuts!

:mug:

I started with the same equipemnt, that will be everything you need to start extract brewing. That setup should cost you somewhere near $80-100 dollars.

I would bottle a few batches to make sure you enjoy the hobby before going nuts on the kegorator, but will admit, my keezer has renewed my love for brewing, and was worth the $500 to assemble (all new parts)
 
Another Texan for the grinder!



I started with the same equipemnt, that will be everything you need to start extract brewing. That setup should cost you somewhere near $80-100 dollars.

I would bottle a few batches to make sure you enjoy the hobby before going nuts on the kegorator, but will admit, my keezer has renewed my love for brewing, and was worth the $500 to assemble (all new parts)

Yeah, I'm mainly skipping the bottling due to space constraints, and planning a build similar to something I saw on these forums (keezer on bottom, fermentation/lagering chamber up top). I'm sure it's ambitious, but I love beer and doubt I'll tire of the hobby in a week. Plus, once I get past the initial outlay, it'll be cheaper than buying beer. My wife calls me a princess 'cause I can't stomach the cheap domestic garbage...I have a penchant for the pricey german imports.
 
My wife calls me a princess 'cause I can't stomach the cheap domestic garbage...I have a penchant for the pricey german imports.

my wife calls me a beer snob for the same reason.... I ask for a list of beers at a resteraunt, then order water.
 
Back
Top