Grainfather!!

[MichaelNZ]

Did they announce something? honestly, either way I think you will be happy!

I'm in New Zealand and the Grainfather system is available here. Our voltage is 240v / 50Hz so I wonder if you could order an oversees version and 're-plug' it?

 

[nepatsfan1]

Definitely worth replacing. It will make it a bit harder to lift that plate, especially with hot wort over it.

I emailed them about it, even though I did not buy it from them. I did not want to pack the entire thing back up and send it back to Amazon. If not I will spend the 40.00 to buy and new one and grumble about it.

 

[Jag75]

Tac weld it back on . Or jb weld maybe

 

[nepatsfan1]

Tac weld it back on . Or jb weld maybe

Welding is out if the question. JB Weld might have too much crap in it. I was thinking of using clear silicone to try and get it attached.

 

[jaymosbeershack]

Welding is out if the question. JB Weld might have too much crap in it. I was thinking of using clear silicone to try and get it attached.

JB weld is rated as food safe.

 

[nepatsfan1]

JB weld is rated as food safe.

That’s good to know. Thanks for the info

 

[RedlegEd]

That’s good to know. Thanks for the info

Hi. Another suggestion,...you could go to big Orange or Blue and buy a couple of stainless #4 or #6 stainless screws with nuts, drill the tab & plate, and use the fasteners to secure it. A little more work than silicone or JB weld, but a lot more permanent and robust. Good luck in whatever you do, but really I hope GF just replaces it for you. Ed

 

[nepatsfan1]

Hi. Another suggestion,...you could go to big Orange or Blue and buy a couple of stainless #4 or #6 stainless screws with nuts, drill the tab & plate, and use the fasteners to secure it. A little more work than silicone or JB weld, but a lot more permanent and robust. Good luck in whatever you do, but really I hope GF just replaces it for you. Ed

I will give it a good thinking. Just need to find a place to drill through the tab being an apartment dweller. Not really going to do anything until I hear back from GF. Thanks for all the great ideas everyone. It has been awhile since I was active on the site but getting the GF got me going again.

 

[Jag75]

I will give it a good thinking. Just need to find a place to drill through the tab being an apartment dweller. Not really going to do anything until I hear back from GF. Thanks for all the great ideas everyone. It has been awhile since I was active on the site but getting the GF got me going again.

If it's under warranty should be no issue . I received mine with one of those tabs broken off . Had a new one at my doorstep within a week.

 

[skleice]

And I get my Grainfather (Amazon purchase) and one of the lifts for the top mash screen was broken off..... Might just go with the one for a brew and see how it will affect anything.

I had this happen and GF sent a replacement plate immediately. Is warranty not supported with Amazon purchase?

 

[nepatsfan1]

I had this happen and GF sent a replacement plate immediately. Is warranty not supported with Amazon purchase?

It probably is just my paranoias ahh

 

[nepatsfan1]

Dumb question I could not find in the manual..... How do. Change the controller to Fahrenheit from Celsius? The app has it ok the box still has celsius

 

[RedlegEd]

If it's the Connect controller, Hold the Set button for 6+ seconds.

You can find it here: https://grainfather.com/media/wysiwyg/PDFs/V4_GF_CNTRL_BOX_LR.pdfhttps://grainfather.com/media/wysiwyg/PDFs/V4_GF_CNTRL_BOX_LR.pdf

 

[nepatsfan1]

If it's the Connect controller, Hold the Set button for 6+ seconds.

You can find it here: https://grainfather.com/media/wysiwyg/PDFs/V4_GF_CNTRL_BOX_LR.pdfhttps://grainfather.com/media/wysiwyg/PDFs/V4_GF_CNTRL_BOX_LR.pdf

Duh.... Thanks Ed

 

[nepatsfan1]

The unit is all clean and tested. Did a quick boil test. 6 Gallons got to about 210 with the lid on and was boiling. I am not too concerned as most videos I seen has it at 209 and boiling. Plus malt has a different boil profile than just plain water. Cannot wait for my first brew day on this a week from tomorrow.

 

[Frilock]

You probably won't even notice about the top mash screen. For the last several brews now mine has been 'falling into' the mash and its not been much of a problem. I'm considering just not even using the top one for my brew.

 

[doogster]

Who has replaced the "wort out" tubing on their original style CFC? And if you did, what size tubing did you use, and where did you source it? I'm having a hard time finding custom length "300mm" silicon tubing

Want to put replace the original with a longer piece on so I can get out of the business of lifting fermentors.

Cheers!

 

[hedgie57]

Give Cleveland brew shop a call and see what ID sizes they have.sold by the foot

 

[RedlegEd]

Who has replaced the "wort out" tubing on their original style CFC? And if you did, what size tubing did you use, and where did you source it? I'm having a hard time finding custom length "300mm" silicon tubing

Want to put replace the original with a longer piece on so I can get out of the business of lifting fermentors.

Cheers!

Hi. I bought this tubing a while ago to replace/extend my GF's CFC wort out tube. So far, it's worked great. The only issue I've had is that being thin walled, it tends to kink if you bend it too sharply.

https://www.amazon.com/gp/product/B000FOWGGW/?tag=skimlinks_replacement-20

Hope this helps,
Ed

 

[bruce19]

It appears there is a Grainfather Black Friday sale currently underway. 10% off now, 20% come the weekend after Thanksgiving.

 

[Jag75]

It appears there is a Grainfather Black Friday sale currently underway. 10% off now, 20% come the weekend after Thanksgiving.

Whoa dang it! I just got mine last month

 

[nepatsfan1]

And I get my Grainfather (Amazon purchase) and one of the lifts for the top mash screen was broken off..... Might just go with the one for a brew and see how it will affect anything.

So They are not going replace the top plate but want me to go through Amazon (which wants me to return the whole thing) not impressed by there so called "warranty" and customer service. Buyer beware if buying not from them. I am sure some homebrew sites are accommodating but do not go to Amazon for it. I am really pissed off.

 

[RedlegEd]

So They are not going replace the top plate but want me to go through Amazon (which wants me to return the whole thing) not impressed by there so called "warranty" and customer service. Buyer beware if buying not from them. I am sure some homebrew sites are accommodating but do not go to Amazon for it. I am really pissed off.

Man, that really sucks and I'm sorry they didn't work with you...I don't blame you for being pissed. I agree about not returning the whole thing to Amazon either as it's more trouble than it's worth. I was very fortunate when I bought mine in August of 2016 from HomebrewSupply (with a good discount,) and it arrived damaged. The folks there worked with me to make it right, and it turned out to be a very positive experience. I hope you don't let this sour you on the Grainfather. It's a wonderful piece of kit and will really enhance your brew days, and it also makes really good beer if you do your part. Ed

 

[nepatsfan1]

Man, that really sucks and I'm sorry they didn't work with you...I don't blame you for being pissed. I agree about not returning the whole thing to Amazon either as it's more trouble than it's worth. I was very fortunate when I bought mine in August of 2016 from HomebrewSupply (with a good discount,) and it arrived damaged. The folks there worked with me to make it right, and it turned out to be a very positive experience. I hope you don't let this sour you on the Grainfather. It's a wonderful piece of kit and will really enhance your brew days, and it also makes really good beer if you do your part. Ed

I’m a little soured but I really like it. I’m just taking your advice and going to get some stainless nuts and bolts and attach it that way. First brew day is this Sunday.

 

[Jag75]

So They are not going replace the top plate but want me to go through Amazon (which wants me to return the whole thing) not impressed by there so called "warranty" and customer service. Buyer beware if buying not from them. I am sure some homebrew sites are accommodating but do not go to Amazon for it. I

Yeah that sucks. I wouldn't send the whole thing back for that either . You can try to use it with one of the tabs like you said but it may put more stress on that one and break off . A machine shop might only charge you the cost of one stick because it would only take literally 30 seconds . Even a car repair shop maybe able spot weld it back. The bolt and nut will work fine though .

 

[wyobrew]

It appears there is a Grainfather Black Friday sale currently underway. 10% off now, 20% come the weekend after Thanksgiving.

Where? I’m looking and can’t find it on sale anywhere.

 

[hedgie57]

Midwest Supplies $870 with code Jumpstart

 

[bruce19]

Where? I’m looking and can’t find it on sale anywhere.

Google “Grainfather Black Friday”. I’ve only seen supplier’s note the sale. I contacted my LHBS and they order me one (conical). I will now wait for Black Friday to go pick it up to obtain the 20% discount.

 

[skleice]

Keep an eye on Northern Brewer. They frequently have 20% discounts with free shipping.

 

[jaymosbeershack]

Keep an eye on Northern Brewer. They frequently have 20% discounts with free shipping.

But then you would be supporting ABInBev.