jCOSbrew
Well-Known Member
Competed my eBIAB control panel inspired by several of the threads on the forum. Wanted manual and PID control like the EBCIII as well as some additional features like the e-stop, alarm, and auto mode for the pump. A phase angle ssr allows manual control with the potentiometer and the pid uses relay output and simple on/off control of the 220v contractor. Test run went well and this should save some time on brew day. With recirculation I hit the process temp within 1 deg f.
For those who eBIAB, do you use the element and recirculate during the mash or just insulate the kettle? My AL kettle will lose a couple degrees every 15 minutes.
For those who eBIAB, do you use the element and recirculate during the mash or just insulate the kettle? My AL kettle will lose a couple degrees every 15 minutes.