cheap mini fridge for kegerator?

[cakes227]

Anyone know of a mini fridge without a freezer or with a removable freezer for around $150? I currently have a modified haier mini fridge that fits a half barrel keg but it's a very tight squeeze with the freezer so I am looking to get a new one. I know about the Danby 4.4 with no freezer and the Frigidaire 4.4 with the removable freezer but I am not seeing much else so I figured I'd ask before dropping $180 + on one of those. Craigslist isn't yielding many results in my area and a full size fridge is out of the question since I live in an apartment. I also may post my build if anyone is interested, I haven't seen much on mini fridge half barrel conversion and thought it might come in handy.

 

[ThatGeekGuy]

I'd vote for the Danby, Walmart will deliver to your house for no extra charge. I got lucky and found one on CL in primo condition for $100. The twin tap tower arrives next week....

 

[cakes227]

Ya, I may end up doing that, do you think you could do me a favor and give me the interior dimensions of the fridge, and maybe a couple of pics of the hot coils and compressor in the back? I need measurements from the front of the fridge to the hump, from the front to the back, from top to bottom, and side to side.

 

[ThatGeekGuy]

cakes,
Sorry for the delay, been busy. Here's the general interior info:

- 29" high, 27" in the center where the thermostat and light mount on the roof.
- 16.5" wide, almost 18" if you trim away the molded-in bottom shelf support.
- 16" deep to the cold plate on the back wall.
- 10" from the front to the hump after you remove the front door cubby and replace with a flat sheet.

It won't fit two commercial 1/6bbls, but will handle two Cornies and CO2 without trimming the shelf support. It handles a single 1/6bbl no prob. Easy to modify, here's a good reference:
http://www.kegkits.com/kegerator4.htm