I am working on building a control panel with a BCS 460 as the brains and a 14" LCD with touchscreen hooked up to a raspberry pi to control the BCS.
The LCD is model LTN140AT01 and I got it from ebay. Here is a link to the HDMI to LCD controller board that I used. and here is a link to the touchscreen panel I used.
Instead of cutting a big hole and mounting the LCD from the back I designed a frame for it and 3d printed it to hold it on the front. I also designed another frame for the inside of the door to hold the lcd controller board.
Here is where it stands right now. The front is put together and all the 120 wiring is complete. I need to wire up the BCS to the relays still.
The LCD is model LTN140AT01 and I got it from ebay. Here is a link to the HDMI to LCD controller board that I used. and here is a link to the touchscreen panel I used.
Instead of cutting a big hole and mounting the LCD from the back I designed a frame for it and 3d printed it to hold it on the front. I also designed another frame for the inside of the door to hold the lcd controller board.
Here is where it stands right now. The front is put together and all the 120 wiring is complete. I need to wire up the BCS to the relays still.