1st beer attempt ever....with lots of pics - BIAB

[haeffnkr]

That pressure gauge is awesome. :rockin:

Thanks !
Bigger is always better right?

The urinal is awesome

That keeps showing up in all my pics... just giving the people what they want

On a serious note -
Not sure if my regulator is working accurately.
The gauge was at 12 pounds last night and this morning it was about 10.
I burbed the keg and hit the pressure relief on the regulator and it did not go up.
So I adjusted the regulator again.
Will have to see where it is when I get home.

It seemed very touchy when I was trying to set it last night.
I thought this was tested/rebuilt from the guy I bought it from.

thanks Kevin

 

[wyzazz]

On a serious note -
Not sure if my regulator is working accurately.
The gauge was at 12 pounds last night and this morning it was about 10.
I burbed the keg and hit the pressure relief on the regulator and it did not go up.
So I adjusted the regulator again.
Will have to see where it is when I get home.

It seemed very touchy when I was trying to set it last night.
I thought this was tested/rebuilt from the guy I bought it from.

thanks Kevin

Close the main valve on the regulator (going out to the keg), purge the regulator, set it at whatever PSI you want it to be at, then open that valve back up. It "should" stay there and stop "walking".

As for the urinal, I've always been partial to this one...

 

[BillyBroas]

Nice writeup! Jeff's bags really are great. I'm pretty sure I could fit inside of mine and doubt it would rip if someone lifted me. Hmmm....

 

[Tinpanharry]

Hi Kevin,
I swapped kegs with you tonight. Is that the picture of fate or irony? ... with the beer in the foreground and urinal in the background.
TPH

My second batch seems to be coming along very nicely.
Supposed to be a munich helles.

Finished at 1.015 and it is now cold crashing.

1.058 og
1.015 fg = 5.6 abv
That is higher than the recipe style calls for ... not sure what else I can do.

Sample seems great.

thanks Kevin

 

[seatbelt123]

That keeps showing up in all my pics... just giving the people what they want

That made me laugh. You know your audience!

 

[haeffnkr]

Hello All,

I installed my 2 shanks/Perlicks the other day.
I hooked up my Accuflex Bev-Seal Ultra barrier line to the shank - Keg and that was a bit of a pain.

Not much to installing the faucets, get a step bit and blast through the side of the refrigerator. I plan on installing 6 faucets...got them all marked out.

I ordered a bunch of tap handles over the last week. I got this Becks first in the mail. $6.19 delivered.... got to love ebay.

This is the first pour... I think a little of that foam is starsan that I did not come out of the line.

Same glass

After the second glass it seemed to taste better and not much foam... hardly any actually....not sure if the beer is all carbed up yet.

I guess this hobby might work out

thanks Kevin

 

[Doed]

Do you have the recipe for this beer? That is the lightest colored homebrew I have seen.

 

[tre9er]

Do you have the recipe for this beer? That is the lightest colored homebrew I have seen.

https://www.homebrewtalk.com/f62/miller-lite-really-triple-hopped-123937/

 

[strumke]

I love the glass, I've got 9 of those on top of my kegerator!

 

[haeffnkr]

Hello All,
I brewed yesterday and made a few tweaks to things that worked out well, so I thought I would share.

I brewed BMs Centennial Blonde yesterday -
https://www.homebrewtalk.com/f66/centennial-blonde-simple-4-all-grain-5-10-gall-42841/

Only change was I added 4 oz of left over 6 row and had to up the hop schedule to .3 oz to keep the IBU at 22 ish.

I have learned that my process yields about me about 87% efficiency and thus I need to up my hops to keep the recipe IBU. (or lower my grain amount)

The recipe was to be 1.040 and I was shooting for 1.045 and hit 1.047.
That is 87% per tastybrew calculator.

I also found a link on here somewhere that mentioned a neat trick to aerate wort by adding a piece of racking cane with a 1/16" hole in the middle of the boil kettle drain tube.

Hard to see the hole but if you look close you can see it and the line of air it SUCKS in.

I put the cooled wort up on the table, stirred it hard for a minute, let it rest for 20-ish to settle out some, then put on the tub and open the valve, dump in 3 gallons, stop... dump yeast... then let it rip again until it the kettle stop draining.
I leave about 1/2 gallon of trub in the kettle cause my pick up tube is kind high...

All that foam is from the dumping the wort into the carboy, the wort had NO foam in the kettle.
After a few hours I saw Nottingham starting to work, wort was at 62.
Next morning about 15 hours later, air lock was going, wort was at 60.

Hope this helps someone.
thanks Kevin

 

[haeffnkr]

Hello All,
I brewed yesterday and made a few tweaks to things that worked out well, so I thought I would share.

I brewed BMs Centennial Blonde yesterday -
https://www.homebrewtalk.com/f66/centennial-blonde-simple-4-all-grain-5-10-gall-42841/

Only change was I added 4 oz of left over 6 row and had to up the hop schedule to .3 oz to keep the IBU at 22 ish.

I have learned that my process yields about me about 87% efficiency and thus I need to up my hops to keep the recipe IBU. (or lower my grain amount)

The recipe was to be 1.040 and I was shooting for 1.045 and hit 1.047.
That is 87% per tastybrew calculator.

I also found a link on here somewhere that mentioned a neat trick to aerate wort by adding a piece of racking cane with a 1/16" hole in the middle of the boil kettle drain tube.

Hard to see the hole but if you look close you can see it and the line of air it SUCKS in.

I put the cooled wort up on the table, stirred it hard for a minute, let it rest for 20-ish to settle out some, then put on the tubing and open the valve, dump in 3 gallons, stop... dump yeast... then let it rip again until it the kettle stop draining.
I leave about 1/2 gallon of trub in the kettle cause my pick up tube is kind high...

All that foam is from the dumping the wort into the carboy, the wort had NO foam in the kettle.
After a few hours I saw Nottingham starting to work, wort was at 62.
Next morning about 15 hours later, air lock was going, wort was at 60.

Hope this helps someone.
thanks Kevin

 

[periwinkle1239]

Nice. Brew on fellow St. Louisian!

 

[2brew1cup]

How doesn't the sleeping bag melt..

 

[RM-MN]

How doesn't the sleeping bag melt..

I'm assuming that you mean when wrapping a pot with the sleeping bag for mashing. When you wrap the mash tun (boil pot if you are doing BIAB) you can hold the temperature without adding heat so your sleeping bag should never get warmer than about 160 F. and it won't melt at that temperature. When the mash is over you remove it and begin heating again for the boil.

 

[Stauffbier]

I'm assuming that you mean when wrapping a pot with the sleeping bag for mashing. When you wrap the mash tun (boil pot if you are doing BIAB) you can hold the temperature without adding heat so your sleeping bag should never get warmer than about 160 F. and it won't melt at that temperature. When the mash is over you remove it and begin heating again for the boil.

I actually had problems with my insulation melting just with the heat on the bottom sides of my keggle even though the heat was off. Now I only put the insulation jacket on about 2/3 of the way down and then I lower it about 15 mins later to avoid melting it again...

 

[haeffnkr]

I actually had problems with my insulation melting just with the heat on the bottom sides of my keggle even though the heat was off. Now I only put the insulation jacket on about 2/3 of the way down and then I lower it about 15 mins later to avoid melting it again...

I have not had any issues with melting thus far.
Soon as I turn off the burner and I stir the mash a bit... make sure temp is where I want it and wrap it up.
But - with the corners of the burner sticking out I dont actually get the blankets really tight against the bottom of the keg, more of a tent effect actually. (which is not the best approach to hold the heat in...)

The other day it was very windy, gusting to 30 mph and 40 F outside temp and I did not have the bottom wrapped very tight.
I had the mash set at 151 watched it for 5 minutes with no change in temp, then I had to run an errand.
That errand took longer than I wanted and when I got back the mash was 141, after 70 minutes. (in the past I have had better luck holding the heat, but that wind was killing Tuesday)
I pulled the blankets, cranked the heat hard, kept stirring and ran the mash up to 170 then pulled the bag. (my current process.... after mash time.... crank heat and to do a semi sparge I guess you call it... )
Let it drip for 15 minutes as it hung from the ladder and kept the heat on until it started to boil.

thanks Kevin

 

[Pilotpip]

Kevin,

Looks like we're pretty much neighbors. Just saw the link on GBS so I came over here to look. Great thread. I've done a few extract batches and just bought some voile at the craft store by mid-rivers to make up a bag and start doing BIAB. Good stuff man. That beer looks incredible!

 

[ArcticBear]

awesome first (and second) brew days...

i'm definitely the flying by the seat of my pants taking in a ton of information and switching up way too many things every time i brew.

quick question though... i'm sure you sanitize everything before using it, but you dont fear any kind of contamination or bacteria from keeping an in use urinal only a few feet from where you brew/ferment/rack/keg/etc...?

i'm not talking about handwashing and things of that nature, just the usual bacteria you might expect from a working urinal...

 

[haeffnkr]

Kevin,

Looks like we're pretty much neighbors. Just saw the link on GBS so I came over here to look. Great thread. I've done a few extract batches and just bought some voile at the craft store by mid-rivers to make up a bag and start doing BIAB. Good stuff man. That beer looks incredible!

HI -
thanks for saying hello, look me up during the next meeting, looking to go all electric very soon with my setup.
It will be awesome.

awesome first (and second) brew days...

i'm definitely the flying by the seat of my pants taking in a ton of information and switching up way too many things every time i brew.

quick question though... i'm sure you sanitize everything before using it, but you dont fear any kind of contamination or bacteria from keeping an in use urinal only a few feet from where you brew/ferment/rack/keg/etc...?

i'm not talking about handwashing and things of that nature, just the usual bacteria you might expect from a working urinal...

No Fear !
I dont pee on my equipment I dont really do any brewing or racking over there... I do kind of ferment a few feet from it though I guess..
No issue at this time, 7 batches down so far.

thanks for asking
Kevin

 

[evandena]

Reminds me of my first brew day a couple weeks ago. I was like you, tons of research and parts gathering before ever brewing a beer. Hell, I even had to teach myself how to weld for this.
I'm just now enjoying my first brew, fresh from the tap, and it's delicious.

Here's a shot of my first brew day.